EN 50342-1:2006
(Main)Lead-acid starter batteries - Part 1: General requirements and methods of test
Lead-acid starter batteries - Part 1: General requirements and methods of test
This standard is applicable to lead-acid batteries with a nominal voltage of 12 V, used primarily as a power source for the starting of internal combustion engines, lighting and also for auxiliary equipment of internal combustion engine vehicles. These batteries are commonly called "starter batteries". Batteries with a nominal voltage of 6 V are also included within the scope of this standard. All referenced voltages have to be divided by two for 6 V batteries. This standard is applicable to batteries for the following purposes: - batteries for passenger cars, - batteries for commercial and industrial vehicles for normal use, - batteries for commercial and industrial vehicles for severe use. This standard is not applicable to batteries for other purposes, for example the starting of railcar internal combustion engines.
Blei-Akkumulatoren-Starterbatterien - Teil 1: Allgemeine Anforderungen und Prüfungen
Batteries d'accumulateurs de démarrage au plomb - Partie 1: Prescriptions générales et méthodes d'essais
La présente norme est applicable aux accumulateurs au plomb, d'une tension nominale de 12 V utilisés principalement comme source de courant, pour le démarrage des moteurs à combustion interne, ainsi que pour l'éclairage et les installations auxiliaires des véhicules équipés de moteur à combustion interne. En langage pratique, ce type d'accumulateur est appelé "batterie de démarrage". Les batteries ayant une tension nominale de 6 V font également partie du domaine d'application de cette norme. Pour les batteries de 6 V, toutes les tensions spécifiées doivent être divisées par deux. Les applications de ces accumulateurs sont les suivantes: - batteries pour véhicules de tourisme, - batteries pour véhicules commerciaux, utilitaires et industriels en usage normal, - batteries pour véhicules commerciaux, utilitaires et industriels en usage intensif. Cette norme ne s'applique pas aux batteries destinées à d'autres utilisations telles que le démarrage des moteurs à combustion interne des autorails.
Svinčeve starterske baterije – 1. del: Splošne zahteve in preskusne metode
Ta standard se uporablja za svinčeno-kislinske baterije z nazivno napetostjo 12 V, ki se uporabljajo predvsem kot vir napajanja za zagon motorjev z notranjim izgorevanjem, razsvetljavo in tudi za pomožno opremo vozil z motorji z notranjim izgorevanjem. Običajen te baterije imenujemo »zaganjalne baterije«. Tudi baterije z nazivno napetostjo 6 V so zajete v področje uporabe tega standarda. Vse navedene napetosti je treba v primeru baterij z napetostjo 6 V deliti z 2. Ta standard se uporablja za baterije za naslednje namene: baterije za potniške avtomobile, baterije za komercialna in industrijska vozila za običajno uporabo, baterije za komercialna in industrijska vozila za izredno uporabo. Ta standard se ne uporablja za baterije za druge namene, na primer za zagon železniških motornih vozil z motorjem z notranjim izgorevanjem.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Lead-acid starter batteries -- Part 1: General requirements and methods of testBatteries d'accumulateurs de dmarrage au plomb -- Partie 1: Prescriptions gnrales et mthodes d'essaisBlei-Akkumulatoren-Starterbatterien -- Teil 1: Allgemeine Anforderungen und PrfungenTa slovenski standard je istoveten z:EN 50342-1:2006SIST EN 50342-1:2006en29.220.20ICS:SIST EN 50342:2002/A3:2005SIST EN 50342:2002/A2:2002SIST EN 50342:2002 + A1:20021DGRPHãþDSLOVENSKI
STANDARDSIST EN 50342-1:200601-julij-2006
EUROPEAN STANDARD EN 50342-1 NORME EUROPÉENNE
EUROPÄISCHE NORM April 2006
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2006 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50342-1:2006 E
ICS 01.080.20; 29.220.20 Supersedes EN 50342:2001 + A1:2001 + A2:2001 + A3:2004
English version
Lead-acid starter batteries Part 1: General requirements and methods of test
Batteries d'accumulateurs
de démarrage au plomb Partie 1: Prescriptions générales
et méthodes d'essais
Blei-Akkumulatoren-Starterbatterien Teil 1: Allgemeine Anforderungen
und Prüfungen
This European Standard was approved by CENELEC on 2004-12-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
EN 50342-1:2006 - 2 - Foreword This European Standard was prepared by the Technical Committee CENELEC TC 21X, Secondary cells and batteries. A draft amendment (prA4) to EN 50342:2001 was submitted to the Unique Acceptance Procedure and was approved by CENELEC on 2004-12-01 to be combined with the existing documents and published as EN 50342-1. This European Standard supersedes EN 50342:2001 + A1:2001 + A2:2001 + corrigendum March 2003 + A3:2004 and is the result of a detailed review of the existing documents resulting in a series of changes of an editorial nature designed to make it more clearly defined and consistent.
Annex A of EN 50342:2001, which described the European Type Number for starter batteries (ETN), was removed due to the cessation of its operation by an external company. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2006-11-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2007-12-01 __________
- 3 - EN 50342-1:2006 Contents Clause Page 1 General.4 1.1 Scope.4 1.2 Object.4 1.3 Designation of starter batteries - Electrolyte density and open circuit voltage.4 1.4 Condition on delivery.5 2 General requirements.5 2.1 Identification, labelling.5 2.2 Marking of the polarity.5 2.3 Additional designation.6 3 Functional characteristics.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.