prEN IEC 63261:2023
(Main)Representation of electrical & instrument objects in digital 3d plant models during engineering
Representation of electrical & instrument objects in digital 3d plant models during engineering
Représentation des objets électriques et d’instrumentation dans des modèles d’installation numériques 3d pendant la phase d’ingénierie
Predstavitev električnih in instrumentalnih objektov v digitalnih 3D modelih obratov med inženiringom
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 63261:2023
01-september-2023
Predstavitev električnih in instrumentalnih objektov v digitalnih 3D modelih
obratov med inženiringom
Representation of electrical & instrument objects in digital 3D plant models during
engineering
Ta slovenski standard je istoveten z: prEN IEC 63261:2023
ICS:
29.020 Elektrotehnika na splošno Electrical engineering in
general
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
oSIST prEN IEC 63261:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 63261:2023
---------------------- Page: 2 ----------------------
oSIST prEN IEC 63261:2023
65E/1021/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 63261 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-07-07 2023-09-29
SUPERSEDES DOCUMENTS:
65E/938/CD, 65E/1020/CC
IEC SC 65E : DEVICES AND INTEGRATION IN ENTERPRISE SYSTEMS
SECRETARIAT: SECRETARY:
United States of America Mr Donald (Bob) Lattimer
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
TC 3
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some
Countries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is
the final stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Representation of electrical & instrument objects in digital 3D plant models during engineering
PROPOSED STABILITY DATE: 2026
NOTE FROM TC/SC OFFICERS:
Copyright © 2023 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 63261:2023
– 2 – IEC CDV 63261 IEC:2023
CONTENTS
FOREWORD . 3
INTRODUCTION . 4
1 Scope . 5
2 Normative references . 5
3 Terms definitions and abbreviations . 6
3.1 Terms and definitions . 6
3.2 Abbreviations . 6
4 Requirements for E&I objects . 7
4.1 Properties . 7
4.2 Detail of design . 7
5 Content and timeline of the 3D plant model during engineering . 7
5.1 Content of the 3D plant model . 7
5.2 Timeline of the 3D plant model. 8
6 Model output . 9
7 Conformity . 9
---------------------- Page: 4 --------------------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.