iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 61747-6:2004

(Main)

Liquid crystal and solid-state display devices - Part 6: Measuring methods for liquid crystal modules - Transmissive type

Liquid crystal and solid-state display devices - Part 6: Measuring methods for liquid crystal modules - Transmissive type

Gives details of the quality assessment procedures, inspection requirements, screening sequences, sampling requirements and test and measurement procedures required for the assessment of liquid crystal display modules. This standard is restricted to transmissive liquid crystal display modules using either segment, passive or active matrix and achromatic or colour type LCDs.

Flüssigkristall- und Halbleiter-Anzeige-Bauelemente - Teil 6: Messverfahren für Flüssigkristall-Module - Transmissive Ausführung

Dispositifs d'affichage à cristaux liquides et à semiconducteurs - Partie 6: Méthodes de mesure pour les modules à cristaux liquides - Type transmissif

Définit les détails des procédures d'estimation de la qualité, des conditions d'inspection, des séquences d'examens, des conditions d'échantillonnage et des procédures de test et de mesures pour l'évaluation du module d'afficheur à cristaux liquides. Cette norme est limitée aux modules d'affichage à cristaux liquides de type transmissif utilisant des dispositifs de type soit à segments, soit à matrice passive ou active et achromatique ou couleur.

Prikazalniški elementi s tekočimi kristali in polprevodniki – 6. del: Merilne metode za module s tekočimi kristali – Presojni tip (IEC 61747-6:2004)

General Information

Status
Withdrawn
Publication Date
24-May-2004
Withdrawal Date
30-Apr-2007
ICS
31.120 - Electronic display devices
Technical Committee
CLC/SR 110 - Flat panel display devices
Drafting Committee
IEC/TC 110 - IEC_TC_110
Parallel Committee
IEC/TC 110 - IEC_TC_110
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
30-Jul-2015
Completion Date
30-Jul-2015
Ref Project
SIST EN 61747-6:2005 - Liquid crystal and solid-state display devices -- Part 6: Measuring methods for liquid crystal modules - Transmissive type

Relations

Replaced By
EN 61747-30-1:2012 - Liquid crystal display devices - Part 30-1: Measuring methods for liquid crystal display modules - Transmissive type
Effective Date
28-Jan-2023

Buy Standard

EN 61747-6:2005EN 61747-6:2005
PreviousNext
Standard
EN 61747-6:2005
English language
43 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI SIST EN 61747-6:2005

STANDARD
december 2005
Prikazalniški elementi s tekočimi kristali in polprevodniki – 6. del: Merilne
metode za module s tekočimi kristali – Presojni tip (IEC 61747-6:2004)
Liquid crystal and solid-state display devices – Part 6: Measuring methods for
liquid crystal modules – Transmissive type (IEC 61747-6:2004)
ICS 31.120 Referenčna številka
SIST EN 61747-6:2005(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 61747-6
NORME EUROPÉENNE
EUROPÄISCHE NORM May 2004

ICS 31.120


English version


Liquid crystal and solid-state display devices
Part 6: Measuring methods for liquid crystal modules –
Transmissive type
(IEC 61747-6:2004)


Dispositifs d'affichage à cristaux liquides Flüssigkristall- und Halbleiter-Anzeige-
et à semiconducteurs Bauelemente
Partie 6: Méthodes de mesure Teil 6: Messverfahren
pour les modules à cristaux liquides - für Flüssigkristall-Module –
Type transmissif Transmissive Ausführung
(CEI 61747-6:2004) (IEC 61747-6:2004)






This European Standard was approved by CENELEC on 2004-05-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 61747-6:2004 E

---------------------- Page: 2 ----------------------

EN 61747-6:2004 - 2 -
Foreword
The text of document 110/13/FDIS, future edition 1 of IEC 61747-6, prepared by IEC TC 110, Flat
panel display devices, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 61747-6 on 2004-05-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-02-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2007-05-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61747-6:2004 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 61747-6:2004
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
ISO 13406-1 1999 Ergonomic requirements for work with EN ISO 13406-1 1999
visual displays based on flat panels
Part 1: Introduction

ISO 13406-2 2001 Part 2: Ergonomic requirements for flat EN ISO 13406-2 2001
panel displays

---------------------- Page: 4 ----------------------

NORME CEI
INTERNATIONALE IEC
61747-6
INTERNATIONAL
Première édition
STANDARD
First edition
2004-04
Dispositifs d'affichage à cristaux liquides
et à semiconducteurs –
Partie 6:
Méthodes de mesure pour les modules
à cristaux liquides –
Type transmissif
Liquid crystal and solid-state display devices –
Part 6:
Measuring methods for liquid crystal modules –
Transmissive type
© IEC 2004 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or u
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN 61747-10-1:2013(Main)
Liquid crystal display devices - Part 10-1: Environmental, endurance and mechanical test methods – Mechanical
SIST EN 61747-10-1:2014

IEC 61747-10-1:2013 lists test methods applicable to liquid crystal display devices. It takes into account, wherever possible, the mechanical robustness test methods as outlined in IEC 60068. The object of this standard is to establish uniform preferred test methods with preferred values for stress levels for judging the mechanical properties of liquid crystal display devices. This first edition of IEC 61747-10-1 cancels and replaces Clauses 1 and 2 of the first edition of IEC 61747-5 published in 1998. This edition constitutes a technical revision.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62595-1-1:2013(Main)
LCD backlight unit - Part 1-1: Generic specification
SIST EN 62595-1-1:2013

IEC 62595-1-1:2013 is a generic specification for backlight unit (BLU) for liquid crystal displays. It defines general procedures for quality assessment and gives general rules for the measuring methods of electrical and optical characteristics, rules for climatic and mechanical tests, and rules for endurance tests.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61747-2-1:2013(Main)
Liquid crystal display devices - Part 2-1: Passive matrix monochrome LCD modules - Blank detail specification
SIST EN 61747-2-1:2013

IEC 61747-2-1:2013 serves as a Blank Detail Specification (BDS) for a high quality approval system and contains requirements for style and layout and minimum content of detail specifications. These requirements are applicable when the detail specification is published (e.g. for standard product). This second edition of IEC 61747-2-1 cancels and replaces the first edition published in 1998, and constitutes a technical revision. The main changes from the previous edition are as follows: - several words and test conditions were added in Clause 7 and Clause 8; - the new edition was editorially changed according to the current ISO/IEC Directives - Part 2.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61747-4:2012(Main)
Liquid crystal display devices - Part 4: Liquid crystal display modules and cells - Essential ratings and characteristics
SIST EN 61747-4:2013

IEC 61747-4:2012 describes the essential ratings and characteristics of LCD cells and passive matrix monochrome liquid crystal display modules. It does not apply to active matrix LCD cells nor to multicolour cells. This edition includes the following significant technical changes with respect to the previous edition: - 2.1 and 3.1 of IEC 61747-4:1998 were deleted because these items are defined in IEC 61747-1; - 2.7.6, in 2.7, Supplementary information, of IEC 61747-4:1998 was deleted because the scope of this standard is about passive matrix monochrome liquid crystal display modules; - The item 'Gray scale: digital or analog' in 2.3.1 of IEC 61747-4:1998 was changed to 'Gray scale: number' because it is more accurate; - Contrast mode: light symbol on dark background ('LOD' or 'positive image') or dark symbol on light background ('DOL' or 'negative image') was introduced in this part of IEC 61747 to replace the description in 2.3.1 and 3.3.1 of IEC 61747-4:1998.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61747-30-1:2012(Main)
Liquid crystal display devices - Part 30-1: Measuring methods for liquid crystal display modules - Transmissive type
SIST EN 61747-30-1:2012

IEC 61747-30-1:2012 is restricted to transmissive liquid crystal display-modules using either segment, passive or active matrix and achromatic or colour type LCDs. Furthermore, the transmissive modes of transflective LCD modules with backlights ON are comprised in this document. An LCD module in combination with a touch-panel or a front-light-unit is excluded from the scope because measurements are frequently inaccurate. Touch-panels or front-light-units are removed before measurement. Throughout the main body of this standard, an integrated backlight is assumed to provide the illumination for the measurements. Deviations from this (e.g. segmented displays without integrated backlights) may usually be handled in the same way as display modules with integrated backlight, if an external backlight is provided. However, in the case where one of the two situations should be handled differently, this will be specifically stated. This first edition cancels and replaces IEC 61747-6 published in 2004. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) the document structure was brought in line with 61747-6-2; and b) various technical and editorial changes were made.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61747-6-2:2011(Main)
Liquid crystal display devices - Part 6-2: Measuring methods for liquid crystal display modules - Reflective type
SIST EN 61747-6-2:2011

IEC 61747-6-2:2011 gives details of the quality assessment procedures, the inspection requirements, screening sequences, sampling requirements, and test and measurement procedures required for the assessment of liquid crystal display modules. The purpose of this standard is to indicate and list the procedure-dependent parameters and to prescribe the specific methods and conditions that are to be used for their uniform numerical determination. The contents of the corrigendum of January 2012 have been included in this copy.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61747-5-3:2010(Main)
Liquid crystal display devices - Part 5-3: Environmental, endurance and mechanical test methods - Glass strength and reliability
SIST EN 61747-5-3:2010

IEC 61747-5-3:2009 applies to commercially available liquid crystal displays (LCDs). This standard applies to all LCD types, including transmissive, reflective or transflective liquid crystal display (LCD) modules using either segment, passive or active matrix and achromatic or colour type LCDs that are equipped with their own integrated source of illumination or without their own source of illumination. The objective of this standard is to establish uniform requirements for accurate and reliable measurements of the following LCD parameters: a) quasistatic strength, b) quasistatic fatigue. The methods described in this standard apply to all sizes, small and large, liquid crystal displays. This publication is to be read in conjunction with IEC 61747-1:1998.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61747-4-1:2004(Main)
Liquid crystal display devices - Part 4-1: Matrix colour LCD modules - Essential ratings and characteristics
SIST EN 61747-4-1:2005

Describes the essential ratings and characteristics of matrix colour liquid crystal display modules.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61747-2-2:2004(Main)
Liquid crystal display devices - Part 2-2: Matrix colour LCD modules - Blank detail specification
SIST EN 61747-2-2:2005

This Blank detail specification specifiess Liquid crystal display devices - Part 2-2: Matrix colour LCD modules

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61747-5:1998(Main)
Liquid crystal and solid-state display devices - Part 5: Environmental, endurance and mechanical test methods
SIST EN 61747-5:2002

Lists test methods applicable to liquid crystal display devices. Takes into account, wherever possible, the environmental test methods outlined in EN 60068. Also includes visual inspection for both liquid crystal display cells and modules. Establishes uniform preferred test methods with preferred values for stress levels for judging the environmental properties of liquid crystal display devices.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day