IEC 60747-12-3:1998

Semiconductor devices - Part 12-3: Optoelectronic devices - Blank detail specification for light-emitting diodes- Display application

General Information

• Status: Withdrawn
• Publication Date: 25-Feb-1998
• Withdrawal Date: 14-Feb-2005
• ICS: 31.080.10 - Diodes
• ICS: 31.260 - Optoelectronics. Laser equipment
• Technical Committee: TC 110 - Electronic displays
• Current Stage: WPUB - Publication withdrawn
• Completion Date: 15-Feb-2005

Standards Content (Sample)

INTERNATIONAL
IEC
STANDARD
60747-12-3
QC 720103
First edition
1998-02
Semiconductor devices –
Part 12-3:
Optoelectronic devices –
Blank detail specification for light-emitting diodes –
Display application
Dispositifs à semiconducteurs –
Partie 12-3: Dispositifs optoélectroniques –
Spécification particulière cadre pour les diodes LED
destinées à des applications d'affichage

Reference number
Numéros des publications Numbering

Depuis le 1er janvier 1997, les publications de la CEI As from 1 January 1997 all IEC publications are

sont numérotées à partir de 60000. issued with a designation in the 60000 series.

Publications consolidées Consolidated publications

Les versions consolidées de certaines publications de Consolidated versions of some IEC publications

la CEI incorporant les amendements sont disponibles. including amendments are available. For example,

Par exemple, les numéros d’édition 1.0, 1.1 et 1.2 edition numbers 1.0, 1.1 and 1.2 refer, respectively, to
indiquent respectivement la publication de base, la the base publication, the base publication

publication de base incorporant l’amendement 1, et la incorporating amendment 1 and the base publication

publication de base incorporant les amendements 1 incorporating amendments 1 and 2.

et 2.
Validité de la présente publication Validity of this publication
Le contenu technique des publications de la CEI est The technical content of IEC publications is kept under
constamment revu par la CEI afin qu'il reflète l'état constant review by the IEC, thus ensuring that the
actuel de la technique. content reflects current technology.
Des renseignements relatifs à la date de Information relating to the date of the reconfirmation of
reconfirmation de la publication sont disponibles dans the publication is available in the IEC catalogue.
le Catalogue de la CEI.
Les renseignements relatifs à ces révisions, à l'établis- Information on the revision work, the issue of revised
sement des éditions révisées et aux amendements editions and amendments may be obtained from
peuvent être obtenus auprès des Comités nationaux de IEC National Committees and from the following
la CEI et dans les documents ci-dessous: IEC sources:
• Bulletin de la CEI • IEC Bulletin
• Annuaire de la CEI • IEC Yearbook
Accès en ligne* On-line access*
• Catalogue des publications de la CEI • Catalogue of IEC publications
Publié annuellement et mis à jour régulièrement Published yearly with regular updates
(Accès en ligne)* (On-line access)*
Terminologie, symboles graphiques Terminology, graphical and letter
et littéraux symbols
En ce qui concerne la terminologie générale, le lecteur For general terminology, readers are referred to
se reportera à la CEI 60050: Vocabulaire Electro- IEC 60050: International Electrotechnical Vocabulary
technique International (VEI). (IEV).
Pour les symboles graphiques, les symboles littéraux For graphical symbols, and letter symbols and signs
et les signes d'usage général approuvés par la CEI, le approved by the IEC for general use, readers are
referred to publications IEC 60027: Letter symbols to
lecteur consultera la CEI 60027: Symboles littéraux à
utiliser en électrotechnique, la CEI 60417: Symboles be used in electrical technology, IEC 60417: Graphical
graphiques utilisables sur le matériel. Index, relevé et symbols for use on equipment. Index, survey and
compilation of the single sheets
compilation des feuilles individuelles, et la CEI 60617: and IEC 60617:
Symboles graphiques pour schémas. Graphical symbols for diagrams.

Publications de la CEI établies par IEC publications prepared by the same
le même comité d'études technical committee
L'attention du lecteur est attirée sur les listes figurant The attention of readers is drawn to the end pages of
à la fin de cette publication, qui énumèrent les this publication which list the IEC publications issued
publications de la CEI préparées par le comité by the technical committee which has prepared the
d'études qui a établi la présente publication. present publication.
* Voir adresse «site web» sur la page de titre. * See web site address on title page.

INTERNATIONAL
IEC
STANDARD
60747-12-3
QC 720103
First edition
1998-02
Semiconductor devices –
Part 12-3:
Optoelectronic devices –
Blank detail specification for light-emitting diodes –
Display application
Dispositifs à semiconducteurs –
Partie 12-3: Dispositifs optoélectroniques –
Spécification particulière cadre pour les diodes LED
destinées à des applications d'affichage

 IEC 1998 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun any form or by any means, electronic or mechanical,
procédé, électronique ou mécanique, y compris la photo- including photocopying and microfilm, without permission in
copie et les microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: [phone] e-mail: [e-mail] IEC web site http: //www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
PRICE CODE M
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue

– 2 – 60747-12-3 © IEC:1998 (E)

INTERNATIONAL ELECTROTECHNICAL COMMISSION

_________
SEMICONDUCTOR DEVICES –
Part 12-3: Optoelectronic devices –

Blank detail specification for light-emitting diodes –

Display application
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization
for Standardization (ISO) in accordance with conditions determined by agreement between the two
organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical reports or guides and they are accepted by the National Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60747-12-3 has been prepared by subcommittee 47C: Opto-
electronic display and imaging devices, of IEC technical committee 47: Semiconductor devices.
The text of this standard is based on the following documents:
FDIS Report on voting
47C/190/FDIS 47C/198/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
The QC number that appears on the front cover of this publication is the specification number
in the IEC Quality Assessment System for Electronic Components (IECQ).
Annex A forms an integral part of this standard.
A bilingual version of this standard may be issued at a later date.

60747-12-3 © IEC:1998 (E) – 3 –

SEMICONDUCTOR DEVICES –
Part 12-3: Optoelectronic devices –

Blank detail specification for light-emitting diodes –

Display application
INTRODUCTION
The IEC quality assessment system for electronic components is operated in accordance with

the statutes of the IEC and under the authority of the IEC. The object of this system is to define
quality assessment procedures in such a manner that electronic components released by one
participating country as conforming with the requirements of an applicable specification are
equally acceptable in all other participating countries without the need for further testing.
This blank detail specification is one of a series of blank detail specifications for semiconductor
devices and should be used with the following IEC publications:
IEC 60747-10/QC 700000:1991, Semiconductor devices – Part 10: Generic specification for
discrete devices and integrated circuits
IEC 60747-12/QC 720100:1991, Semiconductor devices – Part 12: Sectional specification for
optoelectronic devices
Required information
Numbers shown in brackets on this and the following page correspond to the following items of
required information, which should be entered in the spaces provided.
Identification of the detail specification
[1] The name of the national standards organization under whose authority the detail
specification is issued.
[2] The IECQ number of the detail specification.
[3] The numbers and issue numbers of the generic and sectional specifications.
[4] The national number of the detail specification, data of issue and any further information, if
required by the national system.
Identification of the component
[5] Main function and type number.
[6] Information on typical construction (materials, the main technology) and the package. If a
device has several kinds of derivative products, those differences shall be indicated, for
example feature of characteristics in the comparison table.

If a device is sensitive to electrostatic charges, a caution statement shall be added in the
detail specification.
[7] Outline drawing, terminal identification, marking and/or reference to the relevant document
for outlines.
[8] Category of assessed quality according to 2.6 of the generic specification.
[9] Reference data.
_____________________________________________________________________________
[The clauses given in square brackets on the next pages of this standard, which form the front
page of the detail specification, are intended for guidance to the specification writer and shall
not be included in the detail specification.]
[When confusion may arise as to whether a paragraph is only an instruction to the writer or not,
the paragraph shall be indicated between square brackets.]

– 4 – 60747-12-3 © IEC:1998 (E)

[Name (address) of responsible NAI [1] [Number of IECQ detail specification, [2]

(and possibly of body from which plus issue number and/or date.]

specification is available).]
ELECTRONIC COMPONENT OF [3] [National number of detail specification. [4]
ASSESSED QUALITY IN ACCORDANCE

WITH:
This box need not be used if
Generic specification:
national number repeats IECQ number.]
IEC 60747-10/QC700000
Sectional specification:
IEC 60747-12/QC720100
[and national references if different.]
DETAIL SPECIFICATION FOR: LIGHT EMITTING DIODES – DISPLAY APPLICATION [5]
[Type number(s) of the relevant device(s)]
Ordering information: see clause 7 of this standard.
1 Mechanical description [7] 2 Short description [6]
Outline references: Light emitting diode/IR emitting diode:
IEC 60191-2. [mandatory if available] with/without pigtail
and/or national [if there is no IEC outline]. Type: surface/edge emitting semiconductor
material;
Outline drawing:
GaAs/GaAlAs/InP/InGaAsP/.
[May be transferred to, or given with more
details in clause 10 of this standard.] Encapsulation: metal/glass/plastic/.
Terminal identification: [Some important reference data may be added.]
[Drawing showing pin assignments,
including graphical symbols.]
Marking: [letters and figures] 3 Categories of assessed quality [8]
[The detail specification shall prescribe the
[From 2.6 of the generic specification.]
information to be marked on the device, if any.]
[See 2.5 of generic specification and/or
clause 6 of this standard.]
Reference data [9]
Information about manufacturers who have components qualified to this detail specification is
available in the current qualified products list.

60747-12-3 © IEC:1998 (E) – 5 –

4 Limiting values (absolute maximum rating system)

These values apply over the operating temperature range, unless otherwise stated.

[Repeat only subclause numbers used, with title. Any additional values should be given at the
appropriate place, but without clause number(s).]

[Curves should preferably be given in clause 10 of this standard.]

Subclause Limiting value Symbol Requirements Unit
Min. Max.
4.1 Storage temperature T xx °C
stg
4.2 Operating ambient temperature T xx °C
amb
4.3 Soldering temperature (at maximum T x °C
sld
soldering time and minimum distance x s
to case specified) x mm
4.4 Reverse voltage V xV
R
4.5 Continuous forward current at ambient I xmA
F
temperature of 25 °C
4.6 Peak forward current at ambient I xA
FM
temperature of 25 °C, under specified
pulse conditions (where appropriate)
4.7 Power dissipation P xW
tot
5 Electrical and optical characteristics
See clause 8 of this standard for inspection requirements.
[Repeat only subclause numbers used, with title. Any additional characteristics shall be given
at the appropriate place, but without subclause number(s).]
[When several devices are defined in the same detail specification, the relevant values should
be given on successive lines, avoiding identical values.]
[Curves should preferably be given in clause 10 of this standard.]

– 6 – 60747-12-3 © IEC:1998 (E)

Conditions at T or
amb
Subclause Characteristics Symbol Requirements Unit Tested
T = 25 °C unless
case
otherwise specified
Min. M
...