IEC 61007:2020/COR1:2021
(Corrigendum)Corrigendum 1 - Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures
Corrigendum 1 - Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures
Corrigendum 1 - Transformateurs et inductances utilisés dans les équipements électroniques et de télécommunications - Méthodes de mesure et procédures d'essais
General Information
Relations
Standards Content (Sample)
IEC 2021
INTERNATIONAL ELECTROTECHNICAL COMMISSION
COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE
____________
IEC 61007 IEC 61007
Edition 3.0 2020-07 Édition 3.0 2020-07
TRANSFORMERS AND INDUCTORS FOR USE IN TRANSFORMATEURS ET INDUCTANCES
ELECTRONIC AND TELECOMMUNICATION UTILISÉS DANS LES
EQUIPMENT – MEASURING METHODS AND TEST ÉQUIPEMENTS ÉLECTRONIQUES ET
PROCEDURES DE TÉLÉCOMMUNICATIONS –
MÉTHODES DE MESURE ET PROCÉDURES
D'ESSAIS
CO RRI G E N
...
This May Also Interest You
IEC 61007:2020 describes a number of tests for use in determining the significant parameters and performance characteristics of transformers and inductors for use in electronics and telecommunication equipment. These test methods are designed primarily for transformers and inductors used in all types of electronics applications that can be involved in any specification for such components. Even though these tests can be useful to the other types of transformers used in power distribution applications in utilities, industry, and others, the tests discussed in this document can supplement or complement the tests but are not intended to replace the tests in standards for transformers. Some of the tests described are intended for qualifying a product for a specific application, while others are test practices used for manufacturing and customer acceptance testing. The test methods described here include those parameters most commonly used in the electronics transformer and inductor industry: electric strength, resistance, power loss, inductance, impedance, balance, transformation ratio and many others used less frequently.
This edition includes the following significant technical changes with respect to the previous edition:
a) scope: the application of the scope of IEC 61007 was extended;
b) Clause 2: added new references and updated the references;
c) Clause 3: new definitions were added in 3.3, and in 3.7 the voltage-time product was redefined;
d) test procedures were updated;
e) environmental test procedures: new references were added;
f) Annexes A to G were added.
The contents of the corrigendum of June 2021 have been included in this copy.
- Standard186 pagesEnglish and French languagesale 15% off
Specifies how to prepare detail specifications for high-frequency inductors and intermediate frequency transformers between 10 kHz and 2 GHz.Includes a blank detail specification, which shows the format and indicates which tests are considered to be appropriate to this type of component.
- Standard47 pagesEnglish and French languagesale 15% off
IEC 61007:2020 describes a number of tests for use in determining the significant parameters and performance characteristics of transformers and inductors for use in electronics and telecommunication equipment. These test methods are designed primarily for transformers and inductors used in all types of electronics applications that can be involved in any specification for such components. Even though these tests can be useful to the other types of transformers used in power distribution applications in utilities, industry, and others, the tests discussed in this document can supplement or complement the tests but are not intended to replace the tests in standards for transformers. Some of the tests described are intended for qualifying a product for a specific application, while others are test practices used for manufacturing and customer acceptance testing. The test methods described here include those parameters most commonly used in the electronics transformer and inductor industry: electric strength, resistance, power loss, inductance, impedance, balance, transformation ratio and many others used less frequently.
This edition includes the following significant technical changes with respect to the previous edition:
a) scope: the application of the scope of IEC 61007 was extended;
b) Clause 2: added new references and updated the references;
c) Clause 3: new definitions were added in 3.3, and in 3.7 the voltage-time product was redefined;
d) test procedures were updated;
e) environmental test procedures: new references were added;
f) Annexes A to G were added.
The contents of the corrigendum of June 2021 have been included in this copy.
- Standard186 pagesEnglish and French languagesale 15% off
IEC 61196-1-303:2018(E) defines the requirements for measuring the plating thickness for silver and tin conductors for coaxial cables used in analogue and digital communication systems.
This test method uses a procedure for determining the plating thickness of silver and tin coatings on conductors by galvanic removal (coulometric method).
- Standard9 pagesEnglish languagesale 15% off
IEC 62232:2017 provides methods for the determination of radio-frequency (RF) field strength and specific absorption rate (SAR) in the vicinity of radiocommunication base stations (RBS) for the purpose of evaluating human exposure. This document:
- considers intentionally radiating RBS which transmit on one or more antennas using one or more frequencies in the range 110 MHz to 100 GHz;
- considers the impact of ambient sources on RF exposure at least in the 100 kHz to 300 GHz frequency range;
- specifies the methods to be used for RF exposure evaluation for compliance assessment applications, namely:
- product compliance - determination of compliance boundary information for an RBS product before it is placed on the market;
- product installation compliance - determination of the total RF exposure levels in accessible areas from an RBS product and other relevant sources before the product is put into service;
- in-situ RF exposure assessment – measurement of in-situ RF exposure levels in the vicinity of an RBS installation after the product has been taken into operation;
- describes several RF field strength and SAR measurement and computation methodologies with guidance on their applicability to address both the in-situ evaluation of installed RBS and laboratory-based evaluations;
- describes how surveyors, with a sufficient level of expertise, establish their specific evaluation procedures appropriate for their evaluation purpose;
- provides guidance on how to report, interpret and compare results from different evaluation methodologies and, where the evaluation purpose requires it, determine a justified decision against a limit value and
- provides short descriptions of the informative example case studies given in the companion Technical Report IEC TR 62669]
This second edition cancels and replaces the first edition published in 2011 and constitutes a technical revision.
- Standard240 pagesEnglish languagesale 15% off
IEC 62256:2017 is also available as IEC 62256:2017 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62256:2017 covers turbines, storage pumps and pump-turbines of all sizes and of the following types: Francis; Kaplan; propeller; Pelton (turbines only) and bulb turbines.
This document also identifies without detailed discussion, other powerhouse equipment that could affect or be affected by a turbine, storage pump, or pump-turbine rehabilitation. The object of this document is to assist in identifying, evaluating and executing rehabilitation and performance improvement projects for hydraulic turbines, storage pumps and pump-turbines. This document can be used by owners, consultants, and suppliers to define: needs and economics for rehabilitation and performance improvement; scope of work; specifications and evaluation of results. This document is intended to be: an aid in the decision process; an extensive source of information on rehabilitation; an identification of the key milestones in the rehabilitation process; and identification of the points to be addressed in the decision processes. This document is not intended to be a detailed engineering manual nor a maintenance document. This second edition cancels and replaces the first edition published in 2008. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: Tables 2 to 23 modified, completed and moved to Annex A; 7.3.2: subclauses moved with text changes; new subclauses on temperature, noise, galvanic corrosion, galling and replacement of components without assessment; 7.3.3: complete new subclause on residual life; Tables 29 to 32 moved to Annex C; New Annex B with assessment examples.
Key words: Turbines, Storage pump, Pump turbines, Rehabilitation, Performance.
- Standard158 pagesEnglish languagesale 15% off
- Standard488 pagesEnglish languagesale 15% off
- Standard326 pagesEnglish and French languagesale 15% off
IEC 60335-2-69:2016 is available as IEC 60335-2-69:2016RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60335-2-69:2016 deals with the safety of electrical motor-operated vacuum cleaners, including back-pack vacuum cleaners, and dust extractors, for wet suction, dry suction, or wet and dry suction, intended for commercial indoor or outdoor use with or without attachments. They may be provided with a blowing or inflating function. It also deals with the safety of centrally-sited vacuum cleaners, excluding the installation of the system. Requirements on the safe installation of centrally-sited vacuum cleaners are not addressed by this standard but need to be taken into account. This standard applies to machines for commercial use. The following list, although not comprehensive, gives an indication of locations that are included in the scope:
- public use areas such as hotels, schools, hospitals;
- industrial locations, for example factories and manufacturing shops;
- retail outlets, for example shops and supermarkets;
- business premises, for example offices and banks and
- all uses other than normal housekeeping purposes. They are not equipped with a traction drive. The following power systems are covered: mains powered motors up to a rated voltage of 250 V for single-phase appliances and 480 V for other appliances, and battery powered motors. This standard also applies to machines handling hazardous dust, such as asbestos. This standard does not apply to:
- vacuum cleaners and water-suction cleaning appliances for household use;
- floor treatment machines for commercial use;
- spray extraction machines for commercial use;
- hand-held mains-operated electrical garden blowers, vacuums and blower vacuums;
- hand-held and transportable motor-operated electric tools;
- appliances for medical purposes;
- machines designed for use in corrosive environments;
- machines designed for picking up liquids with a flash point below 55 °C and machines designed for use in explosive environments (dust, vapour or gas), except those designed for use in zone 22. This fifth edition cancels and replaces the fourth edition published in 2012. It constitutes a technical revision. The principal changes in this edition as compared with the third edition of IEC 60335-2-69 are as follows (minor changes are not listed):
- the scope has been revised editorially to avoid misunderstandings;
- terms and definitions has been revised with regard to the requirements revised;
- the standard has been revised in general and updated regarding state-of-the-art, as far as necessary, in particular some changes have been made to Clauses 15, 22 and 25;
- the standard has been aligned with the newest amendment of IEC 60335-1:2010+A1:2013;
- Annex AA was revised and restructured;
- Annex CC was revised;
- general additions for vacuum cleaners with blowing functions have been introduced and a new Annex GG 'Particular requirements for mobile wet vacuum cleaners for rescue and firefighting services (MWF)' was added. It was established on the basis of the fifth edition (2010) of that standard. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of its publication. Key words: Vacuum Cleaner, Commercial Use, Wet and Dry Vacuum Cleaner, Power Brush
This publication is to be read in conjunction with IEC 60335-1:2010.
- Standard263 pagesEnglish languagesale 15% off
- Standard174 pagesEnglish and French languagesale 15% off
IEC 62541-4:2015 defines the OPC Unified Architecture (OPC UA) Services. The Services described are the collection of abstract Remote Procedure Calls (RPC) that are implemented by OPC UA Servers and called by OPC UA Clients. This second edition cancels and replaces the first edition published in 2011. It constitutes a technical revision. It includes the following changes:
- Update for 6.4 Redundancy.
- Clarifications for Publish and Reconnect scenarios.
- Handling of MonitoredItem changes in short network interruption scenarios.
- Update for 6.1.3 Determining if a Certificate is Trusted.
- Revised definition of parameters semaphoreFile and isOnline in Service RegisterServer.
- Services ModifySubscription and ModifyMonitoredItems.
- Standard384 pagesEnglish and French languagesale 15% off
IEC 61000-4-36:2014(E) provides methods to determine test levels for the assessment of the immunity of equipment and systems to intentional electromagnetic interference (IEMI) sources. It introduces the general IEMI problem, IEMI source parameters, derivation of test limits and summarises practical test methods. Keywords: EMC, electromagnetic compatibility
- Standard83 pagesEnglish languagesale 15% off
IEC 61534-21:2014 specifies the particular requirements and tests for PT systems intended for mounting on walls and/or ceiling. They may be installed flush or semi-flush, surface mounted, suspended or spaced away from the surface using fixing devices. This second edition cancels and replaces the first edition published in 2006 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- Clauses 18 to 22 have been adapted to IEC 61534-1:2011 and include short-circuit test requirements;
- Additional classification, terms and requirements for wall powertrack (PT) systems mounted at the skirting level (close to the floor) position.
This publication is to be read in conjunction with IEC 61534-1:2011.
- Standard21 pagesEnglish and French languagesale 15% off
- Standard42 pagesEnglish and French languagesale 15% off
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.