SIST EN IEC 61980-2:2023
(Main)Electric vehicle wireless power transfer (WPT) systems - Part 2: Specific requirements for MF-WPT system communication and activities (IEC 61980-2:2023)
Electric vehicle wireless power transfer (WPT) systems - Part 2: Specific requirements for MF-WPT system communication and activities (IEC 61980-2:2023)
This Part of IEC 61980 addresses communication and activities of magnetic field wireless power transfer (MF-WPT) systems.
The requirements in this document are intended to be applied for MF-WPT systems accordin to IEC 61980-3 and ISO 19363.
The aspects covered in this document include:
- operational and functional characteristics of the MF-WPT communication system and related activities
- operational and functional characteristics of the positioning system
The following aspects are under consideration for future documents:
- requirements for two- and three-wheel vehicles,
- requirements for MF-WPT systems supplying power to EVs in motion, and
- requirements for bidirectional power transfer
Note: Any internal communication at Supply device or EV device is not in the scope of this document
Kontaktlose Energieübertragungssysteme (WPT) für Elektrofahrzeuge - Teil 2: Besondere Anforderungen an die Kommunikation und Aktivitäten von MF-WPT-Systemen (IEC 61980-2:2023)
Systèmes de transfert de puissance sans fil (WPT) pour véhicules électriques - Partie 2: Exigences spécifiques pour la communication et les activités des systèmes MF-WPT (IEC 61980-2:2023)
IEC 61980-2:2023 traite de la communication et des activités des systèmes de transfert d’énergie sans fil en champ magnétique (MF-WPT).
Les exigences du présent document sont destinées à être appliquées aux systèmes MF-WPT conformément aux normes CEI 61980-3 et ISO 19363.
Les aspects traités dans le présent document comprennent les caractéristiques opérationnelles et fonctionnelles du système de communication MF-WPT et des activités connexes, ainsi que les caractéristiques opérationnelles et fonctionnelles du système de positionnement.
Les aspects ci-après sont à l’étude pour les futurs documents:
- prescriptions applicables aux véhicules à deux et trois roues; les
- exigences relatives aux systèmes MF-WPT alimentant les véhicules électriques en mouvement;
- exigences pour le transfert de puissance bidirectionnel.
NOTE Toute communication interne au niveau du dispositif d’alimentation ou du dispositif EV n’entre pas dans le domaine d’application du présent document
Brezžični sistemi za prenos električne energije za električna vozila (WPT) - 2. del: Posebne zahteve za komunikacijo med sistemom MF-WPT in dejavnostmi (IEC 61980-2:2023)
Ta del IEC 61980 obravnava komunikacijo in dejavnosti sistemov MF-WPT.
Zahteve iz tega dokumenta so namenjene uporabi za sisteme MF-WPT v skladu s standardoma IEC 61980-3 in ISO 19363.
V tem dokumentu so zajeti naslednji vidiki:
– operativne lastnosti in lastnosti delovanja komunikacijskega sistema MF-WPT ter povezanih dejavnosti
– operativne lastnosti in lastnosti delovanja sistema za določanje položaja
Za morebitno vključitev v prihodnje dokumente se obravnavajo naslednji vidiki:
– zahteve za dvo- in trikolesna vozila;
– zahteve za sisteme MF-WPT, ki napajajo električna vozila v gibanju;
– zahteve za dvosmerni prenos energije.
Opomba: Na področje uporabe tega dokumenta ne spada notranja komunikacija na ravni napajalne naprave ali naprave električnega vozila (EV).
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 61980-2:2023
01-september-2023
Brezžični sistemi za prenos električne energije za električna vozila (WPT) - 2. del:
Posebne zahteve za komunikacijo med sistemom MF-WPT in dejavnostmi (IEC
61980-2:2023)
Electric vehicle wireless power transfer (WPT) systems - Part 2: Specific requirements
for MF-WPT system communication and activities (IEC 61980-2:2023)
Kontaktlose Energieübertragungssysteme (WPT) für Elektrofahrzeuge - Teil 2:
Besondere Anforderungen an die Kommunikation und Aktivitäten von MF-WPT-
Systemen (IEC 61980-2:2023)
Systèmes de transfert de puissance sans fil (WPT) pour véhicules électriques - Partie 2:
Exigences spécifiques pour la communication et les activités des systèmes MF-WPT
(IEC 61980-2:2023)
Ta slovenski standard je istoveten z: EN IEC 61980-2:2023
ICS:
43.120 Električna cestna vozila Electric road vehicles
SIST EN IEC 61980-2:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 61980-2:2023
---------------------- Page: 2 ----------------------
SIST EN IEC 61980-2:2023
EUROPEAN STANDARD EN IEC 61980-2
NORME EUROPÉENNE
EUROPÄISCHE NORM June 2023
ICS 43.120 Supersedes CLC IEC/TS 61980-2:2020
English Version
Electric vehicle wireless power transfer (WPT) systems - Part 2:
Specific requirements for MF-WPT system communication and
activities
(IEC 61980-2:2023)
Systèmes de transfert de puissance sans fil (WPT) pour Kontaktlose Energieübertragungssysteme (WPT) für
véhicules électriques - Partie 2: Exigences spécifiques pour Elektrofahrzeuge - Teil 2: Besondere Anforderungen an die
la communication et les activités des systèmes MF-WPT Kommunikation und Aktivitäten von MF-WPT-Systemen
(IEC 61980-2:2023) (IEC 61980-2:2023)
This European Standard was approved by CENELEC on 2023-06-07. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61980-2:2023 E
---------------------- Page: 3 ----------------------
SIST EN IEC 61980-2:2023
EN IEC 61980-2:2023 (E)
European foreword
The text of document 69/881/FDIS, future edition 1 of IEC 61980-2, prepared by IEC/TC 69 "Electrical
power/energy transfer systems for electrically propelled road vehicles and industrial trucks" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61980-2:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-03-07
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-06-07
document have to be withdrawn
This document supersedes CLC IEC/TS 61980-2:2020 and all of its amendments and corrigenda (if
any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a Standardization Request given to CENELEC by the
European Commission and the European Free Trade Association.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61980-2:2023 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have t
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.