SIST EN ISO 17829:2016
(Main)Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015)
Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015)
ISO 17829:2015 specifies the methods for the determination of diameter and length of pellets. Concerning the pellet length methods for both determination of the proportion of oversized pellets and for determination of the average length are included.
Biogene Festbrennstoffe - Bestimmung der Länge und des Durchmessers von Pellets (ISO 17829:2015)
Diese Internationale Norm legt die Verfahren zur Bestimmung von Durchmesser und Länge von Pellets fest. Hinsichtlich der Pelletlänge sind sowohl Verfahren zur Bestimmung des Anteils an übergroßen Pellets als auch zur Bestimmung der durchschnittlichen Länge enthalten.
Biocombustibles solides - Détermination de la longueur et du diamètre des granulés (ISO 17829:2015)
ISO 17829:2015 spécifie les méthodes permettant de déterminer le diamètre et la longueur des granulés. Pour ce qui concerne la longueur des granulés, la présente Norme internationale comprend une méthode de détermination de la proportion des granulés de longueur supérieure aux spécifications et une méthode de détermination de la longueur moyenne des granulés.
Trdna biogoriva - Določevanje dolžine in premera peletov (ISO 17829:2015)
Ta dokument opisuje metode za določevanje premera in dolžine peletov. Kar zadeva dolžino peletov, so vključene metode za določevanje deleža prevelikih peletov in določevanje povprečne dolžine.
General Information
- Status
- Withdrawn
- Public Enquiry End Date
- 06-Jul-2014
- Publication Date
- 08-Dec-2015
- Withdrawal Date
- 02-Oct-2025
- Technical Committee
- AGO - Refuse derived fuel
- Current Stage
- 9900 - Withdrawal (Adopted Project)
- Start Date
- 01-Oct-2025
- Due Date
- 24-Oct-2025
- Completion Date
- 03-Oct-2025
Relations
- Effective Date
- 01-Jan-2016
- Effective Date
- 01-Nov-2025
Frequently Asked Questions
SIST EN ISO 17829:2016 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015)". This standard covers: ISO 17829:2015 specifies the methods for the determination of diameter and length of pellets. Concerning the pellet length methods for both determination of the proportion of oversized pellets and for determination of the average length are included.
ISO 17829:2015 specifies the methods for the determination of diameter and length of pellets. Concerning the pellet length methods for both determination of the proportion of oversized pellets and for determination of the average length are included.
SIST EN ISO 17829:2016 is classified under the following ICS (International Classification for Standards) categories: 75.160.40 - Biofuels. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN ISO 17829:2016 has the following relationships with other standards: It is inter standard links to SIST EN 16127:2012, SIST EN ISO 17829:2025. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN ISO 17829:2016 is associated with the following European legislation: EU Directives/Regulations: 2000/76/EC; Standardization Mandates: M/298. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN ISO 17829:2016 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2016
1DGRPHãþD
SIST EN 16127:2012
7UGQDELRJRULYD'RORþHYDQMHGROåLQHLQSUHPHUDSHOHWRY ,62
Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015)
Biogene Festbrennstoffe - Bestimmung der Länge und des Durchmessers von Pellets
(ISO 17829:2015)
Biocombustibles solides - Détermination de la longueur et du diamètre des granulés (ISO
17829:2015)
Ta slovenski standard je istoveten z: EN ISO 17829:2015
ICS:
27.190 Biološki viri in drugi Biological sources and
alternativni viri energije alternative sources of energy
75.160.10 Trda goriva Solid fuels
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 17829
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2015
EUROPÄISCHE NORM
ICS 27.190; 75.160.10 Supersedes EN 16127:2012
English Version
Solid biofuels - Determination of length and diameter of
pellets (ISO 17829:2015)
Biocombustibles solides - Détermination de la Biogene Festbrennstoffe - Bestimmung der Länge und
longueur et du diamètre des granulés (ISO des Durchmessers von Pellets (ISO 17829:2015)
17829:2015)
This European Standard was approved by CEN on 5 September 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17829:2015 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 17829:2015) has been prepared by Technical Committee ISO/TC 238 "Solid
biofuels" in collaboration with Technical Committee CEN/TC 335 “Solid biofuels” the secretariat of
which is held by SIS.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2016, and conflicting national standards shall be
withdrawn at the latest by May 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN 16127:2012.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 17829:2015 has been approved by CEN as EN ISO 17829:2015 without any modification.
INTERNATIONAL ISO
STANDARD 17829
First edition
2015-10-15
Solid Biofuels — Determination of
length and diameter of pellets
Biocombustibles solides — Détermination de la longueur et du
diamètre des granulés
Reference number
ISO 17829:2015(E)
©
ISO 2015
ISO 17829:2015(E)
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – All rights reserved
ISO 17829:2015(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 2
6 Sample preparation . 2
7 Procedure. 3
7.1 Determination of pellet diameter class. 3
7.2 Measuring of individual pellet length . 3
7.3 Determination share of oversize length of pellets . 3
7.3.1 Weighing . 3
7.3.2 Sorting by length . 3
7.3.3 Weighing of fractions by length . 3
8 Calculation . 4
8.1 Pellet diameter class . 4
8.2 Share of oversize pellets . 4
8.3 Average pellet length . 4
9 Performance characteristics . 4
10 Test report . 4
...
La norme SIST EN ISO 17829:2016 présente des méthodes essentielles pour la détermination de la longueur et du diamètre des pellets de biomasse solide. Son champ d'application est particulièrement pertinent pour les producteurs et les utilisateurs de combustibles solides, car elle offre une approche standardisée pour évaluer des aspects clés de la qualité des pellets. L'une des forces majeures de cette norme est sa précision dans la définition des méthodes de mesure. En spécifiant les techniques pour déterminer à la fois la longueur moyenne et la proportion de pellets de taille supérieure, la norme garantit une évaluation fiable de la conformité des produits aux exigences du marché. Cela est crucial pour assurer une performance optimale lors de l'utilisation de ces combustibles solides. En outre, la norme SIST EN ISO 17829:2016 est d'une grande pertinence dans le cadre des standards internationaux en matière de durabilité et de qualité des bioénergies. Sa conformité contribue non seulement à l'harmonisation des pratiques au niveau mondial, mais elle renforce également la transparence et la confiance parmi les acteurs de la filière. Les méthodes élaborées dans cette norme sont facilement applicables et peuvent être intégrées dans les processus de production existants, ce qui facilite son adoption par les industries concernées. La clarté des directives permet également de réduire les erreurs lors de la mesure, augmentant ainsi la fiabilité des résultats obtenus. En somme, la norme SIST EN ISO 17829:2016 constitue un document de référence incontournable pour quiconque s'engage dans la production ou l'utilisation de pellets de biomasse solide, renforçant ainsi les pratiques industrielles tout en soutenant la transition vers des sources d'énergie renouvelable.
Die Norm SIST EN ISO 17829:2016 befasst sich mit der Bestimmung von Länge und Durchmesser von Pellets aus festen Biomassebrennstoffen. Sie bietet einen umfassenden Rahmen, um die Maße von Pellets präzise zu erfassen und definiert Methoden zur Bestimmung der Diametervariationen sowie der Länge der Pellets, was für die Qualitätssicherung in der Biomasseindustrie von zentraler Bedeutung ist. Ein wesentlicher Stärke dieser Norm liegt in ihrer detaillierten Methodik. Sie umfasst nicht nur die Standardisierung der Messmethoden, sondern ebenso die Verfahren zur Ermittlung des Anteils an übergroßen Pellets sowie die Berechnung der durchschnittlichen Länge. Diese Aspekte sind entscheidend, um die Konsistenz und Qualität der Pellets sicherzustellen, die in verschiedenen Anwendungen in der Energieerzeugung genutzt werden. Die Relevanz der SIST EN ISO 17829:2016 zeigt sich in der wachsenden Bedeutung von festen Biomassebrennstoffen in der nachhaltigen Energieversorgung. Angesichts der globalen Bemühungen, den CO2-Ausstoß zu reduzieren und erneuerbare Energiequellen zu fördern, spielt die genaue Bestimmung der Pelletqualität eine Schlüsselrolle bei der Optimierung von Verbrennungsprozessen und der Effizienz von Heizsystemen. Durch die Einhaltung der Norm wird nicht nur die Qualität der Bioenergieträger sichergestellt, sondern auch der Markt für Biomasseprodukte wird gefördert, da Hersteller und Anwender auf eine verlässliche Grundlage für die Bewertung und den Einsatz von Pellets zurückgreifen können. Somit trägt die Norm zur Etablierung von einheitlichen Standards in einer sich stetig entwickelnden Branche bei und ist ein unverzichtbares Werkzeug für Unternehmen, die in dem Bereich der festen Biomassebrennstoffe aktiv sind.
SIST EN ISO 17829:2016は、固体バイオ燃料におけるペレットの長さと直径の測定方法を定めた重要な標準です。この標準の範囲は、ペレットのサイズ評価に関連する全ての業界において、品質管理の向上に寄与することを目的としています。 この標準の強みは、ペレットの直径と長さを正確に測定するための具体的かつ詳細な手法が提供されている点です。特に、オーバーサイズペレットの割合を determinate する方法と平均長さの測定方法が含まれており、これはペレットの品質を評価する上で非常に重要です。これにより、バイオ燃料業界の企業は、自社の製品の一貫性を保ち、顧客の期待に応えることができます。 さらに、SIST EN ISO 17829:2016は国際的な基準に基づいているため、他国との取引においても通用性が高く、国際的な市場での競争力を向上させる要素となります。この標準がもたらす透明性と信頼性は、バイオ燃料の利用促進にも寄与するでしょう。 したがって、SIST EN ISO 17829:2016は、バイオ燃料関連の業界において不可欠な標準であり、ペレットの質を向上させるための指針として機能します。企業はこの標準を遵守することで、製品の品質向上と業界内での信頼性向上を図ることができます。
SIST EN ISO 17829:2016 문서는 고형 바이오 연료의 펠릿 길이 및 직경 측정을 위한 표준적인 방법을 제공합니다. 이 표준은 펠릿의 직경 및 길이를 측정하기 위한 구체적인 방법론을 기술하고 있으며, oversized 펠릿의 비율 측정 및 평균 길이 결정 방법을 포함하고 있습니다. 이 표준의 범위는 고형 바이오 연료 산업에서 펠릿의 품질 관리를 위한 기초적인 측정 기준을 제공하여, 제조사와 소비자 간의 이해를 돕고, 펠릿의 품질 일관성을 보장하는 데 중요한 역할을 합니다. 또한, SIST EN ISO 17829:2016은 간단하고 명확한 절차를 통해 펠릿의 형상 특성을 분석할 수 있어, 다양한 응용 분야에서 신뢰할 수 있는 데이터 확보를 가능하게 하는 강점을 지니고 있습니다. 이 표준은 펠릿의 품질 기준을 정립하고, 산업 전반의 품질 향상에 기여하는 중요한 문서입니다. 따라서 이 문서는 고형 바이오 연료 제품의 규격과 품질 평가에서 필수적으로 참고해야 할 기준으로, 지속 가능한 에너지 개발과 환경 보호를 위해 더욱 중요한 역할을 할 것으로 기대됩니다. SIST EN ISO 17829:2016 표준의 적용은 시장에서의 경쟁력을 높이고, 소비자 신뢰를 구축하는 데 필수적입니다.
The SIST EN ISO 17829:2016 standard is pivotal for the solid biofuels industry as it delineates the precise methods for determining the length and diameter of pellets. Its scope includes comprehensive guidelines for measuring not only the average length of pellets but also evaluating the proportion of oversized pellets, which is crucial for assessing the quality and suitability of biofuel for various applications. One of the strengths of this standard is its clear methodology, which aids manufacturers and laboratories in ensuring consistent and accurate measurements. This consistency is vital for maintaining quality control in the production of solid biofuels, ultimately enhancing reliability for end-users. Moreover, the inclusion of protocols for oversized pellet measurement helps in identifying potential issues that could arise from irregular sizes, thereby contributing to improved process optimization. The relevance of SIST EN ISO 17829:2016 extends to its alignment with international standards, facilitating global trade and communication in the biofuels market. By adhering to this standard, organizations can demonstrate compliance with internationally recognized practices, enhancing their credibility among consumers and partners alike. In summary, the SIST EN ISO 17829:2016 standard stands out due to its thorough approach to pellet measurement, fostering quality assurance in the solid biofuels sector while promoting standardization on a global scale.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...