SIST EN ISO 18134-2:2024
(Main)Solid biofuels - Determination of moisture content - Part 2: Simplified method (ISO 18134-2:2024)
Solid biofuels - Determination of moisture content - Part 2: Simplified method (ISO 18134-2:2024)
ISO 18134-2:2017 describes the method of determining the total moisture content of a test sample of solid biofuels by drying in an oven and is used when the highest precision is not needed, e.g. for routine production control on site. The method described in ISO 18134 (all parts) is applicable to all solid biofuels. The moisture content of solid biofuels (as received) is always reported based on the total mass of the test sample (wet basis).
Biogene Festbrennstoffe - Bestimmung des Wassergehaltes - Teil 2: Gesamtgehalt an Wasser - Vereinfachtes Verfahren (ISO 18134-2:2024)
Dieses Dokument beschreibt das Verfahren zur Bestimmung des Gesamtgehalts an Wasser einer Versuchsprobe von biogenen Festbrennstoffen durch Trocknen in einem Ofen und wird angewendet, wenn nicht die höchste Präzision erforderlich ist, z. B. zur routinemäßigen Produktionskontrolle im Betrieb. Das in ISO 18134 (alle Teile) beschriebene Verfahren ist auf alle biogenen Festbrennstoffe anwendbar. Der Wassergehalt von biogenen Festbrennstoffen (im Anlieferungszustand) wird immer bezogen auf die Gesamtmasse der Versuchsprobe (Bezugsbasis Feuchtmasse) angegeben.
ANMERKUNG Biomassematerialien können geringe Mengen an flüchtigen organischen Verbindungen (VOC, en: volatile organic compounds) enthalten, die bei der Bestimmung des Wassergehaltes durch Ofentrocknung verdampfen können (siehe Literaturhinweise [1] und [2]). Die Freisetzung derartiger Verbindungen ist im Verhältnis zum Gesamtgehalt an Wasser, der mit diesem Verfahren bestimmt wird, verhältnismäßig gering und wird in diesem Dokument vernachlässigt.
Biocombustibles solides - Dosage de la teneur en humidité - Partie 2: Méthode simplifiée (ISO 18134-2:2024)
ISO 18134-2:2017 décrit la méthode de détermination de la teneur en humidité totale d'un échantillon pour essai de biocombustibles solides par séchage à l'étuve. Cette méthode est utilisée lorsque la fidélité maximale n'est pas nécessaire, par exemple, pour un contrôle de routine de la production in situ. La méthode décrite dans l'ISO 18134 (toutes les parties) est applicable à l'ensemble des biocombustibles solides. La teneur en humidité des biocombustibles solides (à réception) est toujours rapportée à la masse totale de l'échantillon pour essai (base humide).
Trdna biogoriva - Določanje vlage - 2. del: Poenostavljena metoda (ISO 18134-2:2024)
Standard ISO 18134-2:2017 opisuje metodo določanja celotne vlage v preskusnem vzorcu trdnih biogoriv s sušenjem v peči in se uporablja, kadar pri določanju vlage ni potrebna najvišja raven natančnosti (npr. pri rutinski kontroli proizvodnje na mestu uporabe). Metoda, opisana v standardu ISO 18134 (vsi deli), se uporablja za vsa trdna biogoriva. Navedena vsebnost vlage v trdnih biogorivih (pri dobavi) vedno temelji na skupni masi preskusnega vzorca (mokra osnova).
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 18134-2:2024
01-junij-2024
Nadomešča:
SIST EN ISO 18134-2:2017
Trdna biogoriva - Določanje vlage - 2. del: Poenostavljena metoda (ISO 18134-
2:2024)
Solid biofuels - Determination of moisture content - Part 2: Simplified method (ISO 18134
-2:2024)
Biogene Festbrennstoffe - Bestimmung des Wassergehaltes - Teil 2: Gesamtgehalt an
Wasser - Vereinfachtes Verfahren (ISO 18134-2:2024)
Biocombustibles solides - Dosage de la teneur en humidité - Partie 2: Méthode simplifiée
(ISO 18134-2:2024)
Ta slovenski standard je istoveten z: EN ISO 18134-2:2024
ICS:
75.160.40 Biogoriva Biofuels
SIST EN ISO 18134-2:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 18134-2:2024
---------------------- Page: 2 ----------------------
SIST EN ISO 18134-2:2024
EN ISO 18134-2
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2024
EUROPÄISCHE NORM
ICS 27.190; 75.160.40 Supersedes EN ISO 18134-2:2017
English Version
Solid biofuels - Determination of moisture content - Part 2:
Simplified method (ISO 18134-2:2024)
Biocombustibles solides - Dosage de la teneur en Biogene Festbrennstoffe - Bestimmung des
humidité - Partie 2: Méthode simplifiée (ISO 18134- Wassergehaltes - Teil 2: Gesamtgehalt an Wasser -
2:2024) Vereinfachtes Verfahren (ISO 18134-2:2024)
This European Standard was approved by CEN on 22 March 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 18134-2:2024 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 18134-2:2024
EN ISO 18134-2:2024 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 18134-2:2024
EN ISO 18134-2:2024 (E)
European foreword
This document (EN ISO 18134-2:2024) has been prepared by Technical Committee ISO/TC 238 "Solid
biofuels" in collaboration with Technical Committee CEN/TC 335 “Solid biofuels” the secretariat of
which is held by SIS.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2024, and conflicting national standards shall
be withdrawn at the latest by October 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 18134-2:2017.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 18134-2:2024 has been approved by CEN as EN ISO 18134-2:2024 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 18134-2:2024
-------
...
SLOVENSKI STANDARD
oSIST prEN ISO 18134-2:2023
01-maj-2023
Trdna biogoriva - Določevanje vlage - 2. del: Celotna vlaga - Poenostavljena
metoda (ISO/DIS 18134-2:2023)
Solid biofuels - Determination of moisture content - Part 2: Total moisture - Simplified
method (ISO/DIS 18134-2:2023)
Biogene Festbrennstoffe - Bestimmung des Wassergehaltes - Teil 2: Gesamtgehalt an
Wasser - Vereinfachtes Verfahren (ISO/DIS 18134-2:2023)
Biocombustibles solides - Dosage de la teneur en humidité - Partie 2: Humidité totale -
Méthode simplifiée (ISO/DIS 18134-2:2023)
Ta slovenski standard je istoveten z: prEN ISO 18134-2
ICS:
75.160.40 Biogoriva Biofuels
oSIST prEN ISO 18134-2:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 18134-2:2023
---------------------- Page: 2 ----------------------
oSIST prEN ISO 18134-2:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 18134-2
ISO/TC 238 Secretariat: SIS
Voting begins on: Voting terminates on:
2023-03-24 2023-06-16
Solid biofuels — Determination of moisture content —
Part 2:
Total moisture — Simplified method
Biocombustibles solides — Dosage de la teneur en humidité —
Partie 2: Humidité totale — Méthode simplifiée
ICS: 27.190; 75.160.40
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 18134-2:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
---------------------- Page: 3 ----------------------
oSIST prEN ISO 18134-2:2023
ISO/DIS 18134-2:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 18134-2
ISO/TC 238 Secretariat: SIS
Voting begins on: Voting terminates on:
Solid biofuels — Determination of moisture content —
Part 2:
Total moisture — Simplified method
Biocombustibles solides — Dosage de la teneur en humidité —
Partie 2: Humidité totale — Méthode simplifiée
ICS: 27.190; 75.160.40
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 18134-2:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
© ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
---------------------- Page: 4 ----------------------
oSIST prEN ISO 18134-2:2023
ISO/DIS 18134-2:2023(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.