SIST EN 1458-1:2012
(Main)Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW - Part 1: Safety
Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW - Part 1: Safety
This European Standard specifies the requirements and test methods for the construction, safety, and marking of domestic direct gas-fired tumble dryers, of types B22D and B23D, of nominal heat input not exceeding 6 kW, hereafter referred to as "appliances".
This European Standard does not apply to:
a) catalytic combustion appliances;
b) appliances designed exclusively for industrial purposes;
c) appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere;
d) appliances of the condensing type wherein the heated air and products of combustion used for the drying process are dehumidified by cooling with water or air;
e) appliances intended to be used in vehicles or on board ships or aircraft.
This European Standard covers type testing only.
Direkt gasbeheizte Haushalts-Trommeltrockner der Typen B22D und B23D mit Nennwärmebelastungen nicht über 6 kW - Teil 1: Sicherheit
Diese Europäische Norm legt die Anforderungen an und Prüfverfahren für die Bauweise, Sicherheit und Kennzeichnung von direkt gasbeheizten Haushalts-Trommeltrocknern der Typen B22D und B23D mit Nennwärmebelastungen nicht über 6 kW, im Folgenden „Geräte“ genannt, fest.
Diese Europäische Norm gilt nicht für:
a) Geräte mit katalytischer Verbrennung;
b) Geräte, die ausschließlich für industrielle Zwecke ausgelegt sind;
c) Geräte, die dazu bestimmt sind, an Standorten eingesetzt zu werden, an denen besondere Bedingungen vorherrschen, wie z. B. das Vorhandensein einer korrodierenden oder explosionsfähigen Atmosphäre;
d) Geräte vom kondensierenden Typ, in denen die erwärmte Luft und die Verbrennungsprodukte (Abgase), die für den Trockenprozess genutzt werden, durch Kühlung mit Wasser oder Luft entfeuchtet werden;
e) Geräte, die dazu bestimmt sind, in Fahrzeugen oder an Bord von Schiffen oder Flugzeugen verwendet zu werden.
Diese Europäische Norm behandelt nur die Typprüfung.
Sèche-linge domestiques à tambour rotatif à chauffage direct utilisant les combustibles gazeux, de type B22D et B23D, de débit calorifique nominal ne dépassant pas 6 kW - Partie 1: Sécurité
Cette Norme européenne définit les exigences et les méthodes d'essais relatives à la construction, la
sécurité et le marquage des sèche-linge domestiques à tambour rotatif à chauffage direct utilisant les
combustibles gazeux, de type B22D et B23D, de débit calorifique nominal ne dépassant pas 6 kW,
désignés, ci-après, sous le terme "appareils".
Cette Norme européenne ne s'applique pas:
a) aux appareils à combustion catalytique;
b) aux appareils conçus exclusivement à des fins industrielles;
c) aux appareils destinés à être utilisés dans des locaux où règnent certaines conditions
spécifiques, telles que la présence d'atmosphère corrosive ou explosive;
d) aux appareils du type à condensation à l'intérieur desquels l'air chauffé et les produits de
combustion utilisés pour le séchage sont déshumidifiés par refroidissement à l'eau ou à l'air;
e) aux appareils destinés à être utilisés dans les véhicules ou à bord des bateaux ou des avions.
Cette Norme européenne couvre uniquement les essais de type.
Gospodinjski bobnasti sušilniki s plinskim ogrevanjem tipov B22D in B23D z imensko močjo do vključno 6 kW - 1. del: Varnost
Ta evropski standard določa zahteve in preskusne metode za konstrukcijo, varnost in označevanje gospodinjskih bobnastih sušilnikov s plinskim ogrevanjem tipov B22D in B23D z imensko močjo do vključno 6 kW, v nadaljevanju »aparatov«.
Ta evropski standard ne velja za:
a) aparate s katalitičnim izgorevanjem;
b) aparate, narejene izključno za industrijske namene;
c) aparate za uporabo na mestih, kjer prevladujejo posebne okoliščine, kot je prisotnost korozivne ali eksplozivne atmosfere;
d) aparate kondenzacijskega tipa, pri katerih se segreti zrak in proizvodi izgorevanja, ki se uporabljajo za postopek sušenja, razvlažijo s hlajenjem z vodo ali zrakom;
e) aparate za uporabo v vozilih ali na krovih ladij ali zračnih plovil.
Ta evropski standard zajema samo tipsko preskušanje.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Direkt gasbeheizte Haushalts-Trommeltrockner der Typen B22D und B23D mit Nennwärmebelastungen nicht über 6 kW - Teil 1: SicherheitSèche-linge domestiques à tambour rotatif à chauffage direct utilisant les combustibles gazeux, de type B22D et B23D, de débit calorifique nominal ne dépassant pas 6 kW - Partie 1: SécuritéDomestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW - Part 1: Safety97.060Aparati za nego perilaLaundry appliancesICS:Ta slovenski standard je istoveten z:EN 1458-1:2011SIST EN 1458-1:2012en,fr,de01-januar-2012SIST EN 1458-1:2012SLOVENSKI
STANDARDSIST EN 1458-1:20011DGRPHãþD
SIST EN 1458-1:2012
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1458-1
November 2011 ICS 97.060 Supersedes EN 1458-1:1999English Version
Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW - Part 1: Safety Sèche-linge domestiques à tambour rotatif à chauffage direct utilisant les combustibles gazeux, de type B22D et B23D, de débit calorifique nominal ne dépassant pas 6 kW - Partie 1: Sécurité
Direkt gasbeheizte Haushalts-Trommeltrockner der Typen B22D und B23D mit Nennwärmebelastungen nicht über 6 kW - Teil 1: Sicherheit This European Standard was approved by CEN on 25 September 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1458-1:2011: ESIST EN 1458-1:2012
EN 1458-1:2011 (E) 2 Contents Page Foreword . 51 Scope . 62 Normative references . 63 Terms and definitions . 74 Classification . 164.1 Classification of gases . 164.2 Classification of appliances . 174.2.1 Classification according to the gases capable of being used . 174.2.2 Classification according to the mode of evacuation of the combustion products/supply of combustion air . 195 Construction and design requirements . 195.1 General . 195.1.1 Conversion to different gases . 195.1.2 Materials and method of construction . 205.1.3 Screws . 215.1.4 Maintenance and use . 215.1.5 Thermal insulation . 215.1.6 Gas connections . 225.1.7 Soundness of the gas circuit . 225.1.8 Supply of combustion air and evacuation of combustion products . 235.1.9 Lint collection . 235.1.10 Flame visibility . 235.1.11 Electrical equipment . 235.1.12 Motors and fans . 235.1.13 Operational safety in the event of fluctuation, interruption and restoration of the auxiliary energy . 245.1.14 Combustion air flow failure . 245.2 Requirements for adjusting, control and safety devices . 245.2.1 General . 245.2.2 Automatic shut-off valves . 245.2.3 Multifunctional controls . 255.2.4 Flame supervision devices . 255.2.5 Regulators . 265.2.6 Preset gas rate adjusters . 265.2.7 Automatic burner control systems . 275.2.8 Gas strainers . 275.3 Ignition devices . 275.3.1 General . 275.3.2 Ignition device for the main burner. 275.3.3 Ignition burners . 275.4 Ignition burner or start-gas flame establishment . 275.5 Main flame establishment . 285.5.1 Establishment by means of an ignition burner or start-gas flame . 285.5.2 Direct establishment of the main flame e.g. spark ignition, hot surface igniter . 285.6 Burners . 285.7 Thermostats and control of air temperature . 295.7.1 General requirements . 295.7.2 Overheat cut-off device . 295.8 Clocks and timing devices . 29SIST EN 1458-1:2012
EN 1458-1:2011 (E) 3 5.9 Pressure test points . 295.10 Mechanical hazards . 295.10.1 General . 295.10.2 Requirements for appliances with an opening dimension exceeding 200 mm and a drum having a volume exceeding 60 dm3 . 296 Operational safety . 306.1 General . 306.1.1 Characteristics of test gases: reference and limit gases . 306.1.2 Conditions for preparation of test gases . 316.1.3 Practical application of test gases . 326.1.4 Test pressures . 346.1.5 Use of test gases . 366.1.6 Test room . 376.1.7 Preparation of the appliance . 376.1.8 Test conditions . 376.2 Screws . 386.2.1 Requirements . 386.2.2 Tests . 386.3 Manually operated devices of the automatic burner control systems . 386.3.1 Requirements . 386.3.2 Tests . 396.4 Mechanical hazards . 396.4.1 General . 396.4.2 Appliances with an opening dimension exceeding 200 mm and a drum having a volume exceeding 60 dm3 . 396.5 Stability of appliances. 396.6 Soundness of the gas circuit . 396.6.1 Requirements . 396.6.2 Tests . 396.7 Heat inputs . 406.7.1 Nominal heat input . 406.7.2 Reduced rate . 426.7.3 Heat input of ignition burners . 436.8 Burners . 436.8.1 Resistance to overheating . 436.8.2 Escape of unburnt gas . 436.9 Limiting temperature of various parts of the appliance . 446.9.1 Requirements . 446.9.2 Tests . 446.10 Limiting temperature of floor, walls and worktop . 456.10.1 Requirements . 456.10.2 Tests . 456.11 Limiting temperature of components . 466.11.1 Normal operation . 466.11.2 Severe operation . 466.11.3 Abnormal operation . 466.12 Motor temperatures . 476.12.1 Motor bearings . 476.12.2 Motor windings . 476.13 Ignition, cross-lighting and flame stability . 486.13.1 Ignition and cross-lighting . 486.13.2 Flame stability . 506.13.3 Supplementary requirements and tests . 516.14 Flame supervision devices . 516.14.1 Manual devices . 516.14.2 Automatic devices . 526.15 Regulators . 526.15.1 Requirements . 526.15.2 Tests . 52SIST EN 1458-1:2012
EN 1458-1:2011 (E) 4 6.16 Combustion . 536.16.1 General . 536.16.2 Requirements . 546.16.3 Tests under normal conditions . 556.16.4 Supplementary tests under special conditions . 566.17 Sooting . 596.17.1 Requirements . 596.17.2 Tests . 596.18 Cyclic operation . 596.18.1 Requirements . 596.18.2 Tests . 597 Marking . 607.1 Marking of the appliance . 607.1.1 Data plates . 607.1.2 Warning notices . 617.1.3 Other marking . 617.2 Marking of the packaging . 617.3 Utilization of symbols on the appliance and packaging . 617.3.1 Electrical supply . 617.3.2 Type of gas . 617.3.3 Gas supply pressure . 627.3.4 Country of destination . 627.3.5 Category . 637.3.6 Other optional information . 637.4 Instructions . 647.4.1 General . 647.4.2 Technical instructions for installation and adjustment . 647.4.3 Instructions for use and maintenance . 667.5 Presentation . 66Annex A (informative)
National situations . 76A.1 General . 76A.2 Categories listed in the body of the standard and marketed in different countries . 76A.3 Appliance supply pressures corresponding to the categories given in A.2 . 79A.4 Special categories marketed nationally or locally . 80A.4.1 General . 80A.4.2 Definition of special categories . 83A.4.3 Gas rate adjusters, aeration adjusters and regulators . 86A.4.4 Conversion to different gases . 86A.5 Test gases corresponding to the special categories given in A.4 . 86A.6 Gas connections in the various countries . 89A.7 Equivalence rules . 90A.7.1 General . 90A.7.2 Conversion to categories within a restricted Wobbe index range . 90A.7.3 Conversion to categories within an identical Wobbe index range . 90A.7.4 Conversion to categories within a wider Wobbe index range . 91Annex B (normative)
Special national conditions . 92B.1 Special national conditions . 92B.2 Belgium . 92B.3 Italy . 92B.4 Poland . 92Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 90/396/EEC on the approximation of the laws of Member States concerning gas appliances . 93Bibliography . 97 SIST EN 1458-1:2012
EN 1458-1:2011 (E) 5 Foreword This document (EN 1458-1:2011) has been prepared by Technical Committee CEN/TC 299 “Gas-fired sorption appliances, indirect fired sorption appliances, gas-fired endothermic engine heat pumps and domestic gas-fired washing and drying appliances”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2012, and conflicting national standards shall be withdrawn at the latest by May 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1458-1:1999. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This edition has been prepared to up-date this European Standard in the following respects: a) electrical safety by calling up EN 60335-2-102, b) its normative references, and c) the CEN Member countries and their national situations. The test gases, test pressures and appliance categories given in this European Standard are in accordance with those specified in EN 437. The marking requirements in this European Standard take into account CR 1472. The first part of the standard specifies the requirements and test methods for the construction, safety, marking and testing of the appliances. The second part of the standard specifies the requirements for rational use of energy. This European Standard covers type testing only. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 1458-1:2012
EN 1458-1:2011 (E) 6
1 Scope This European Standard specifies the requirements and test methods for the construction, safety, and marking of domestic direct gas-fired tumble dryers, of types B22D and B23D, of nominal heat input not exceeding 6 kW, hereafter referred to as "appliances". This European Standard does not apply to: a) catalytic combustion appliances; b) appliances designed exclusively for industrial purposes; c) appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere; d) appliances of the condensing type wherein the heated air and products of combustion used for the drying process are dehumidified by cooling with water or air; e) appliances intended to be used in vehicles or on board ships or aircraft. This Europea
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Direkt gasbeheizte Haushalts-Trommeltrockner der Typen B22D und B23D mit Nennwärmebelastungen nicht über 6 kW - Teil 1: SicherheitSèche-linge domestiques à tambour rotatif à chauffage direct utilisant les combustibles gazeux, de type B22D et B23D, de débit calorifique nominal ne dépassant pas 6 kW - Partie 1: SécuritéDomestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW - Part 1: Safety97.060Aparati za nego perilaLaundry appliancesICS:Ta slovenski standard je istoveten z:FprEN 1458-1kSIST FprEN 1458-1:2011en01-junij-2011kSIST FprEN 1458-1:2011SLOVENSKI
STANDARD
kSIST FprEN 1458-1:2011
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN 1458-1
March 2011 ICS 97.060 Will supersede EN 1458-1:1999English Version
Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW - Part 1: Safety Sèche-linge domestiques à tambour rotatif à chauffage direct utilisant les combustibles gazeux, de type B22D et B23D, de débit calorifique nominal ne dépassant pas 6 kW - Partie 1: Sécurité
Direkt gasbeheizte Haushalts-Trommeltrockner der Typen B22D und B23D mit Nennwärmebelastungen nicht über 6 kW - Teil 1: Sicherheit This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee CEN/TC 299.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN 1458-1:2011: EkSIST FprEN 1458-1:2011
FprEN 1458-1:2011 (E) 2 Contents Page Foreword . 61 Scope. 72 Normative references . 73 Terms and definitions . 84 Classification . 174.1 Classification of gases . 174.2 Classification of appliances . 184.2.1 Classification according to the gases capable of being used . 184.2.2 Classification according to the mode of evacuation of the combustion products/supply of combustion air . 205 Construction and design requirements . 215.1 General . 215.1.1 Conversion to different gases . 215.1.2 Materials and method of construction . 225.1.3 Screws . 225.1.4 Maintenance and use . 225.1.5 Thermal insulation . 235.1.6 Gas connections . 235.1.7 Soundness of the gas circuit . 245.1.8 Supply of combustion air and evacuation of combustion products . 245.1.9 Lint collection . 245.1.10 Flame visibility . 245.1.11 Electrical equipment . 255.1.12 Motors and fans . 255.1.13 Operational safety in the event of fluctuation, interruption and restoration of the auxiliary energy . 255.1.14 Combustion air flow failure . 265.2 Requirements for adjusting, control and safety devices . 265.2.1 General . 265.2.2 Automatic shut-off valves . 265.2.3 Multifunctional controls . 275.2.4 Flame supervision devices . 275.2.5 Regulators . 275.2.6 Preset gas rate adjusters . 285.2.7 Automatic burner control systems . 285.2.8 Gas strainers . 285.3 Ignition devices . 295.3.1 General . 295.3.2 Ignition device for the main burner . 295.3.3 Ignition burners . 295.4 Ignition burner or start-gas flame establishment . 295.5 Main flame establishment . 295.5.1 Establishment by means of an ignition burner or start-gas flame . 295.5.2 Direct establishment of the main flame e.g. spark ignition, hot surface igniter . 295.6 Burners . 30kSIST FprEN 1458-1:2011
FprEN 1458-1:2011 (E) 3 5.7 Thermostats and control of air temperature . 305.7.1 General requirements . 305.7.2 Overheat cut-off device . 305.8 Clocks and timing devices . 305.9 Pressure test points . 315.10 Mechanical hazards . 315.10.1 General . 315.10.2 Requirements for appliances with an opening dimension exceeding 200 mm and a drum having a volume exceeding 60 dm3 . 316 Operational safety . 316.1 General . 316.1.1 Characteristics of test gases: reference and limit gases . 316.1.2 Conditions for preparation of test gases. 336.1.3 Practical application of test gases . 346.1.4 Test pressures . 366.1.5 Use of test gases . 376.1.6 Test room . 386.1.7 Preparation of the appliance . 386.1.8 Test conditions . 386.2 Screws . 396.2.1 Requirements . 396.2.2 Tests . 396.3 Manually operated devices of the automatic burner control systems . 396.3.1 Requirements . 396.3.2 Tests . 406.4 Mechanical hazards . 406.4.1 General . 406.4.2 Appliances with an opening dimension exceeding 200 mm and a drum having a volume exceeding 60 dm3 . 406.5 Stability of appliances . 406.6 Soundness of the gas circuit . 406.6.1 Requirements . 406.6.2 Tests . 406.7 Heat inputs . 416.7.1 Nominal heat input . 416.7.2 Reduced rate . 436.7.3 Heat input of ignition burners . 446.8 Burners . 446.8.1 Resistance to overheating . 446.8.2 Escape of unburnt gas . 446.9 Limiting temperature of various parts of the appliance . 456.9.1 Requirements . 456.9.2 Tests . 456.10 Limiting temperature of floor, walls and worktop . 466.10.1 Requirements . 466.10.2 Tests . 466.11 Limiting temperature of components . 476.11.1 Normal operation . 476.11.2 Severe operation . 476.11.3 Abnormal operation . 476.12 Motor temperatures . 486.12.1 Motor bearings . 486.12.2 Motor windings . 486.13 Ignition, cross-lighting and flame stability . 496.13.1 Ignition and cross-lighting . 49kSIST FprEN 1458-1:2011
FprEN 1458-1:2011 (E) 4 6.13.2 Flame stability . 516.13.3 Supplementary requirements and tests . 526.14 Flame supervision devices . 526.14.1 Manual devices . 526.14.2 Automatic devices . 536.15 Regulators . 536.15.1 Requirements . 536.15.2 Tests . 536.16 Combustion . 546.16.1 General . 546.16.2 Requirements . 556.16.3 Tests under normal conditions . 566.16.4 Supplementary tests under special conditions . 576.17 Sooting . 606.17.1 Requirements . 606.17.2 Tests . 606.18 Cyclic operation . 606.18.1 Requirements . 606.18.2 Tests . 607 Marking . 617.1 Marking of the appliance . 617.1.1 Data plates . 617.1.2 Warning notices . 627.1.3 Other marking . 627.2 Marking of the packaging . 627.3 Utilization of symbols on the appliance and packaging . 627.3.1 Electrical supply . 627.3.2 Type of gas . 627.3.3 Gas supply pressure . 637.3.4 Country of destination . 637.3.5 Category . 647.3.6 Other optional information . 647.4 Instructions . 657.4.1 General . 657.4.2 Technical instructions for installation and adjustment . 657.4.3 Instructions for use and maintenance . 677.5 Presentation . 67Annex A (informative)
National situations . 77A.1 General . 77A.2 Categories listed in the body of the standard and marketed in different countries . 77A.3 Appliance supply pressures corresponding to the categories given in A.2 . 80A.4 Special categories marketed nationally or locally . 81A.4.1 General . 81A.4.2 Definition of special categories . 84A.4.3 Gas rate adjusters, aeration adjusters and regulators . 87A.4.4 Conversion to different gases . 87A.5 Test gases corresponding to the special categories given in A.4 . 87A.6 Gas connections in the various countries . 90A.7 Equivalence rules . 91A.7.1 General . 91A.7.2 Conversion to categories within a restricted Wobbe index range . 91A.7.3 Conversion to categories within an identical Wobbe index range . 91A.7.4 Conversion to categories within a wider Wobbe index range. 92Annex B (normative)
Special national conditions . 93kSIST FprEN 1458-1:2011
FprEN 1458-1:2011 (E) 5 B.1 Special national conditions . 93B.2 Belgium . 93B.3 Italy . 93B.4 Poland . 93Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EC Directive 90/396/EEC on the approximation of the laws of Member States concerning gas appliances . 94Bibliography . 98 kSIST FprEN 1458-1:2011
FprEN 1458-1:2011 (E) 6 Foreword This document (FprEN 1458-1:2011) has been prepared by Technical Committee CEN/TC 299 “Gas-fired sorption appliances, indirect fired sorption appliances, gas-fired endothermic engine heat pumps and domestic gas-fired washing and drying appliances”, the secretariat of which is held by UNI. This document is currently submitted to the Unique Acceptance Procedure. This document will supersede EN 1458-1:1999. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This edition has been prepared to up-date this European Standard in the following respects: a) electrical safety by calling up EN 60335-2-102, b) its normative references, and c) the CEN Member countries and their national situations. The test gases, test pressures and appliance categories given in this European Standard are in accordance with those specified in EN 437. For gas-fired type B tumble dryers of nominal heat input not exceeding 20 kW see EN 12752-1 and EN 12752-2. The marking requirements in this European Standard take into account CR 1472. The first part of the standard specifies the requirements and test methods for the construction, safety, marking and testing of the appliances. The second part of the standard specifies the requirements for rational use of energy. This European Standard covers type testing only. kSIST FprEN 1458-1:2011
FprEN 1458-1:2011 (E) 7
1 Scope This European Standard specifies the requirements and test methods for the construction, safety, and marking of domestic direct gas-fired tumble dryers, of types B22D and B23D, of nominal heat input not exceeding 6 kW, hereafter referred to as "appliances". This European Standard does not apply to: a) catalytic combustion appliances; b) appliances designed exclusively for industrial purposes; c) appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere; d) appliances of the condensing type wherein the heated air and products of combustion used for the drying process are dehumidified by cooling with water or air; e) appliances intended to be used in vehicles or on board ships or aircraft. This European Standard covers type testing only. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 88-1:2007, Pressure regulators and associated safety devices for gas appliances — Part 1: Pressure regulators for inlet pressures up to and including 500 mbar EN 125:2010, Flame supervision devices for gas burning appliances — Thermoelectric flame supervision devices EN 126:2004, Multifuctional controls for gas burning appliances EN 161:2007, Automatic shut-off valves for gas burners and gas appliances EN 257:2010, Mechanical thermostats for gas burning appliances EN 298:2003, Automatic burner control systems for gas burners and gas burning appliances with or without fans
kSIST FprEN 1458-1:2011
FprEN 1458-1:2011 (E) 8 EN 1057:2006+A1:2010, Copper and copper alloys — Seamless, round copper tubes for water and gas in sanitary and heating applications CEN/TR 1749:2009, European scheme for the classification of gas appliances according to the method of evacuation of the products of combustion (types) EN 10226-1:2004, Pipe threads where pressure-tight joints are made on the threads — Part 1: Taper external threads and parallel internal threads — Dimensions, tolerances and designation EN 10226-2:2005, Pipe threads where pressure tight joints are made on the threads — Part 2: Taper external threads and taper internal threads — Dimensions, tolerances and designation EN 60335-1:2002, Household and similar electrical appliances — Safety — Part 1: General requirements
(IEC 60335-1:2001, modified) EN 60335-2-11:2003, Household and similar electrical appliances — Safety — Part 2-11: Particular requirements for tumble dryers (IEC 60335-2-11:2002, modified) EN 60335-2-102:2006, Household and similar electrical appliances — Safety — Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections
(IEC 60335-2-102:2004, modified) EN 60584-1:1995, Thermocouples — Part 1: Reference tables (IEC 60584-1:1995) EN 60730-2-9:2002, Automatic electrical controls for household and similar use — Part 2-9: Particular requirements for temperature sensing controls (IEC 60730-2-9:2000, modified) EN ISO 228-1:2
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.