SIST EN 15651-3:2010

Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 3: Sealants for sanitary joints

This European Standard specifies definitions and requirements for sealants used for sealing of joints applied in sanitary areas in the interior of buildings exposed to non-pressurized water. It covers joints in: bathrooms; toilets; showers; domestic kitchens. Industrial, drinking water, underwater (swimming pools, sewage systems, etc.) and food contact applications are excluded from the scope. This European Standard does not provide criteria or recommendations for the design of joints and installation of sealants in sanitary applications.

Fugendichtstoffe für nicht tragende Anwendungen in Gebäuden und Fußgängerwegen - Teil 3: Dichtstoffe für Fugen im Sanitärbereich

Diese Europäische Norms legt Definitionen und Anforderungen an Dichtstoffe zum Abdichten von Fugen im Sanitär¬bereich im Innern von Gebäuden fest, die keinem Druckwasser ausgesetzt sind.
Erfasst werden Fugen in
-   Badezimmern;
-   Toiletten;
-   Duschen;
-   Küchen in Haushalten.
Anwendungen für Brauch  und Trinkwasser, Unter-Wasser-Anwen¬dungen (Schwimmbäder, Abwasser-systeme usw.) und Anwendungen mit Nahrungsmittelkontakt fallen nicht in den Anwendungsbereich dieser Norm.
Diese Europäische Norms legt keine Kriterien oder Empfehlungen für die Ausführung der Fugen und die Installation der Dichtstoffe für Anwendungen im Sanitärbereich fest.
ANMERKUNG   Festlegungen zur Bewertung der Konformität (d. h. zur Erstprüfung sowie zur werkseigenen Produk¬tionskontrolle) und zur Kennzeichnung dieser Produkte werden in EN 15651 5 angegeben.
Diese Europäische Norms gilt nicht für nicht tragende, nicht plastische (nicht in pastöser Form vorliegende) Dicht¬stoffe, die für Fugen im Sanitärbereich angewendet werden.

Mastics pour joints dans la construction immobilière - Définitions, exigences et évaluation de la conformité - Partie 3: Mastics sanitaires

La présente Norme européenne spécifie les définitions et les exigences relatives aux mastics utilisés pour
calfeutrer des joints exposés à une eau n’étant pas sous pression dans les zones sanitaires à l’intérieur des
bâtiments.
Il traite des joints dans :
⎯ les salles de bain ;
⎯ les toilettes ;
⎯ les douches ;
⎯ les cuisines domestiques.
Les applications industrielles et celles en rapport avec l’eau potable, sous l’eau (piscines, systèmes d’égout,
etc.) et en cas de contact alimentaire sont exclues du domaine d’application.
Cette Norme européenne ne fournit pas de critères ou de recommandations pour la conception des joints et la
mise en oeuvre des mastics dans les applications sanitaires.
NOTE Les dispositions concernant l’évaluation de la conformité (à savoir l’essai de type initial et le contrôle de la
production en usine) et le marquage de ces produits sont données dans l’EN 15651-5.
Cette Norme européenne s’applique aux mastics sanitaires non structurels sous forme pâteuse.

Tesnilne mase za nekonstrukcijske stike v stavbah in na sprehajalnih površinah - 3. del: Tesnilne mase za stike v sanitarijah

Ta evropski standard opredeljuje definicije in zahteve za tesnilne mase, ki se uporabljajo za tesnjenje stikov v sanitarnih območjih v notranjosti stavb, ki so izpostavljeni vodi, ki ni pod pritiskom. Zajema stike v: kopalnicah; straniščih; prhah; kuhinjah v gospodinjstvih. Industrijska voda, pitna voda, podvodna uporaba (plavalni bazeni, kanalizacijski sistemi, itd.) in uporaba v stiku s hrano so izključeni iz področja tega standarda. Ta evropski standard ne zagotavlja meril ali priporočil za načrtovanje stikov in namestitev tesnilnih mas za uporabo v sanitarijah.

General Information

• Status: Withdrawn
• Public Enquiry End Date: 31-Aug-2007
• Publication Date: 07-Mar-2010
• Withdrawal Date: 04-Mar-2013
• ICS: 91.100.50 - Binders. Sealing materials
• ICS: 91.140.70 - Sanitary installations
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 04-Mar-2013
• Due Date: 27-Mar-2013
• Completion Date: 05-Mar-2013
• Ref Project: EN 15651-3:2010 - Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 3: Sealants for sanitary joints

Relations

• Replaced By: SIST EN 15651-3:2013 - Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 3: Sealants for sanitary joints
• Effective Date: 01-Apr-2013
• Revised: SIST EN 15651-3:2013 - Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 3: Sealants for sanitary joints
• Effective Date: 12-Mar-2011

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Tesnilne mase za nekonstrukcijske stike v stavbah in na sprehajalnih površinah - 3. del: Tesnilne mase za stike v sanitarijahFugendichtstoffe für nicht tragende Anwendungen in Gebäuden und Fußgängerwegen - Teil 3: Dichtstoffe für Fugen im SanitärbereichMastics pour joints dans la construction immobilière - Définitions, exigences et évaluation de la conformité - Partie 3: Mastics sanitairesSealants for non-structural use in joints in buildings and pedestrian walkways - Part 3: Sealants for sanitary joints91.140.70Sanitarne napraveSanitary installations91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN 15651-3:2010SIST EN 15651-3:2010en,de01-maj-2010SIST EN 15651-3:2010SLOVENSKI
STANDARD



SIST EN 15651-3:2010



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15651-3
March 2010 ICS 91.100.50 English Version
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 3: Sealants for sanitary joints
Mastics pour joints dans la construction immobilière - Définitions, exigences et évaluation de la conformité - Partie 3: Mastics sanitaires
Fugendichtstoffe für nicht tragende Anwendungen in Gebäuden und Fußgängerwegen - Teil 3: Dichtstoffe für Fugen im Sanitärbereich This European Standard was approved by CEN on 29 January 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15651-3:2010: ESIST EN 15651-3:2010



EN 15651-3:2010 (E) 2 Contents Page Foreword .31Scope .42Normative reference .43Terms and definitions .54Requirements .64.1Identification requirements and test methods .64.1.1Short description of the sealant .64.1.2Thermogravimetric test .64.1.3Specific gravity .64.1.4Indentation hardness (Shore hardness) .64.2Conditioning, test procedure and substrates .64.3Performance requirements and test methods for non-structural sealants for sanitary joints .74.3.1General .74.3.2Resistance to flow .84.3.3Evaluation of the action of microorganisms .84.4Reaction to fire .94.4.1General .94.4.2Mounting and fixing conditions for test samples .95Durability . 106Sampling . 107Evaluation of conformity . 107.1General . 107.2Initial type testing . 107.3Factory production control . 108Marking and labelling . 10Annex A (informative)
Example on the frequency of tests for factory production control . 11 SIST EN 15651-3:2010



EN 15651-3:2010 (E) 3 Foreword This document (EN 15651-3:2010) has been prepared by Technical Committee CEN/TC 349 “Sealants for joints in building constuction”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2010, and conflicting national standards shall be withdrawn at the latest by September 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document includes an informative Annex A, dealing with factory production control. This document is one of the product European Standards within the framework series of EN 15651 on Sealants for non-structural use in joints in buildings and pedestrian walkways, as follows:  Part 1: Sealants for facade elements,  Part 2: Sealants for glazing,  Part 3: Sealants for sanitary joints (this document),  Part 4: Sealants for pedestrian walkways,  Part 5: Evaluation of conformity and marking. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 15651-3:2010



EN 15651-3:2010 (E) 4 1 Scope This European Standard specifies definitions and requirements for sealants used for sealing of joints applied in sanitary areas in the interior of buildings exposed to non-pressurized water. It covers joints in:  bathrooms;  toilets;  showers;  domestic kitchens. Industrial, drinking water, underwater (swimming pools, sewage systems, etc.) and food contact applications are excluded from the scope. This European Standard does not provide criteria or recommendations for the design of joints and installation of sealants in sanitary applications. NOTE Provisions on evaluation of conformity (i.e. Initial Type Testing and Factory Production Control) and marking of these products are given in EN 15651-5. This European Standard does not apply to non-structural sealants in any of non-paste form, to those used in sanitary joints. 2 Normative reference The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 13238, Reaction to fire tests for building products — Conditioning procedures and general rules for selection of substrates EN 13501-1, Fire classification of construction products and building elements — Part 1: Classification using data from reaction to fire tests EN 13823, Reaction to fire tests for building products — Building products excluding floorings exposed to the thermal attack by a single burning item EN 15651-5, Sealants for non-structural use in joints in buildings and pedestrian walkways — Part 5: Evaluation of conformity and marking EN 26927:1990, Building construction — Jointing products — Sealants — Vocabulary (ISO 6927:1981) EN ISO 846:1997, Plastics — Evaluation of the action of microorganisms (ISO 846:1997) EN ISO 868, Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) EN ISO 1183-1, Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2004) SIST EN 15651-3:2010



EN 15651-3:2010 (E) 5 EN ISO 7390, Building construction — Jointing products — Determination of resistance to flow of sealants
(ISO 7390:2003) EN ISO 8340, Building construction — Sealants — Determination of tensile properties at maintained extension (ISO 8340:2005) EN ISO 9047, Building construction — Jointing products — Determination of adhesion/cohesion properties of sealants at variable temperatures (ISO 9047:2001) EN ISO 10563, Building construction — Sealants — Determination of change in mass and volume
(ISO 10563:2005) EN ISO 10590, Building construction — Sealants — Determination of tensile properties of sealants at maintained extension after immersion in water (ISO 10590:2005) EN ISO 10591, Building construction — Sealants — Determinati
...