Transformers, reactors, power supply units, and combinations thereof - EMC requirements

EN-IEC 62041 is applicable to transformers, reactors and power supply units covered by the IEC 61558 series of standards. This document deals with the electromagnetic compatibility requirements for emission and immunity within the frequency range 0 Hz to 400 GHz. No tests need to be performed at frequencies where no requirements are specified. For associated transformers, associated reactors and associated power supply units either supplied with or incorporated into an appliance or equipment the relevant EMC standard for that appliance or equipment applies. This document covers normal operating conditions only. Other operations of the transformers, reactors and power supply units (e.g. simulated faults in the electric circuitry for testing purposes or functional safety due to the effects of the electromagnetic phenomena, or evaluation of human being for exposure to electromagnetic fields (EMF)) have not been taken into consideration in this document. Requirements are specified for each port considered. If requirements are different the most severe takes precedence. This document may also be used as a guide to test transformers, reactors and power supply units separately before these are incorporated into an appliance or equipment. This document does not apply to: - uninterruptible power supplies (UPS) covered by IEC 62040 (all parts); - power supply units covered by IEC 61204, (i.e. DC-DC converters, DC power and distribution equipment and power supply units for use in applications covered by IEC 60950-1, IEC 61010-1, IEC 60601-1 and IEC 60065); - power supplies and converters for use with or in products covered by IEC 61347 (all parts).

Transformatoren, Drosseln, Netzgeräte und entsprechende Kombinationen - EMV-Anforderungen

Safety of transformers, reactors, power supply units and combinations thereof - EMC requirements

L'IEC 62041:2017 s’applique aux transformateurs, bobines d’inductance et aux blocs d’alimentation couverts par la série de normes IEC 61558. Le présent document traite des exigences de compatibilité électromagnétique pour l’émission et l’immunité dans la bande de fréquences comprise entre 0 Hz et 400 GHz. Aucun essai n’est nécessaire aux fréquences pour lesquelles aucune exigence n’est spécifiée. Cette troisième édition annule et remplace la deuxième édition parue en 2010. Elle constitue une révision technique.
Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente:


       

  •       ajout d’un article sur les essais de production en série;

  •    

  •       ajout d’un nouvel article sur l’incertitude des mesures, et

  •    

  •       statut de norme harmonisée pour cette troisième édition.


Elle a le statut d’une norme CEM de famille de produits conformément au Guide IEC 107:2009,
Compatibilité électromagnétique – Guide pour la rédaction des publications sur la compatibilité électromagnétique.
La présente version bilingue (2018-01) correspond à la version anglaise monolingue publiée en 2017-08. La version française de cette norme n'a pas été soumise au vote.

Transformatorji, napajalniki, dušilke in podobni proizvodi - Zahteve EMC

General Information

Status
Published
Publication Date
22-Apr-2020
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
10-Mar-2020
Due Date
15-May-2020
Completion Date
23-Apr-2020

Relations

Buy Standard

Standard
EN IEC 62041:2020
English language
35 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62041:2020
01-maj-2020
Nadomešča:
SIST EN 62041:2011
Transformatorji, napajalniki, dušilke in podobni proizvodi - Zahteve EMC
Transformers, reactors, power supply units, and combinations thereof - EMC
requirements
Safety of transformers, reactors, power supply units and combinations thereof - EMC
requirements
Ta slovenski standard je istoveten z: EN IEC 62041:2020
ICS:
29.180 Transformatorji. Dušilke Transformers. Reactors
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
SIST EN IEC 62041:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62041:2020

---------------------- Page: 2 ----------------------
SIST EN IEC 62041:2020


EUROPEAN STANDARD EN IEC 62041

NORME EUROPÉENNE

EUROPÄISCHE NORM
February 2020
ICS 29.180; 33.100 Supersedes EN 62041:2010 and all of its amendments
and corrigenda (if any)
English Version
Transformers, power supplies, reactors and similar products -
EMC requirements
(IEC 62041:2017)
Transformateurs, alimentations, bobines d’inductance et Transformatoren, Drosseln, Netzgeräte und entsprechende
produits analogues – Exigences CEM Kombinationen - EMV-Anforderungen
(IEC 62041:2017) (IEC 62041:2017)
This European Standard was approved by CENELEC on 2019-12-11. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62041:2020 E

---------------------- Page: 3 ----------------------
SIST EN IEC 62041:2020
EN IEC 62041:2020 (E)
European foreword
The text of document 96/465/FDIS, future edition 3 of IEC 62041, prepared by IEC/TC 96
"Transformers, reactors, power supply units, and combinations thereof" was submitted to the IEC-
CENELEC parallel vote and approved by CENELEC as EN IEC 62041:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-09-11
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-12-11
document have to be withdrawn

This document supersedes EN 62041:2010 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62041:2017 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60065 NOTE Harmonized as EN 60065
IEC 60601-1 NOTE Harmonized as EN 60601-1
IEC 60950-1 NOTE Harmonized as EN 60950-1
IEC 61000-4-20:2010 NOTE Harmonized as EN 61000-4-20:2010 (not modified)
IEC 61010-1 NOTE Harmonized as EN 61010-1
IEC 61204 NOTE Harmonized as EN 61204
IEC 61347 (series) NOTE Harmonized as EN 61347 (series)
IEC 62040 (series) NOTE Harmonized as EN 62040 (series)
CISPR 11 NOTE Harmonized as EN 55011


2

---------------------- Page: 4 ----------------------
SIST EN IEC 62041:2020
EN IEC 62041:2020 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60050-161 -  International Electrotechnical Vocabulary. - -
Chapter 161: Electromagnetic compatibility
IEC 61000-3-2 -  Electromagnetic compatibility (EMC) – Part EN IEC 61000-3-2 -
3-2: Limits – Limits for harmonic current
emissions (equipment input current ≤ 16 A
per phase)
IEC 61000-3-3 -  Electromagnetic compatibility (EMC) - Part EN 61000-3-3 -
3-3: Limits - Limitation of voltage changes,
voltage fluctuations and flicker in public
low-voltage supply systems, for equipment
with rated current ≤16 A per phase and
not subject to conditional connection
IEC 61000-3-11 -  Electromagnetic compatibility (EMC) – Part EN IEC 61000-3-11 -
3-11: Limits – Limitation of voltage
changes, voltage fluctuations and flicker in
public low-voltage supply systems –
Equipment with rated current ≤ 75 A and
subject to conditional connection
IEC 61000-3-12 -  Electromagnetic compatibility (EMC) - Part EN 61000-3-12 -
3-12: Limits - Limits for harmonic currents
produced by equipment connected to
public low-voltage systems with input
current >16 A and ≤ 75 A per phase
IEC 61000-4-2 -  Electromagnetic compatibility (EMC) - Part EN 61000-4-2 -
4-2: Testing and measurement techniques
- Electrostatic discharge immunity test
IEC 61000-4-3 -  Electromagnetic compatibility (EMC) - Part - -
4-3: Testing and measurement techniques
- Radiated, radio-frequency,
electromagnetic field immunity test
IEC 61000-4-4 -  Electromagnetic compatibility (EMC) - Part EN 61000-4-4 -
4-4: Testing and measurement techniques
- Electrical fast transient/burst immunity
test
3

---------------------- Page: 5 ----------------------
SIST EN IEC 62041:2020
EN IEC 62041:2020 (E)
Publication Year Title EN/HD Year
IEC 61000-4-5 -  Electromagnetic compatibility (EMC) - Part EN 61000-4-5 -
4-5: Testing and measurement techniques
- Surge immunity test
IEC 61000-4-6 -  Electromagnetic compatibility (EMC) - Part EN 61000-4-6 -
4-6: Testing and measurement techniques
- Immunity to conducted disturbances,
induced by radio-frequency fields
IEC 61000-4-11 -  Electromagnetic compatibility (EMC) - Part EN 61000-4-11 -
4-11: Testing and measurement
techniques - Voltage dips, short
interruptions and voltage variations
immunity tests
IEC 61000-4-34 -  Electromagnetic compatibility (EMC) - Part EN 61000-4-34 -
4-34: Testing and measurement
techniques - Voltage dips, short
interruptions and voltage variations
immunity tests for equipment with input
current more than 16 A per phase
IEC 61000-6-1 -  Electromagnetic compatibility (EMC) - Part EN IEC 61000-6-1 -
6-1: Generic standards - Immunity
standard for residential, commercial and
light-industrial environments
IEC 61000-6-2 -  Electromagnetic compatibility (EMC) - Part EN IEC 61000-6-2 -
6-2: Generic standards - Immunity
standard for industrial environments
IEC 61000-6-3 -  Electromagnetic compatibility (EMC) - Part EN 61000-6-3 -
6-3: Generic standards - Emission
standard for residential, commercial and
light-industrial environments
IEC 61000-6-4 -  Electromagnetic compatibility (EMC) -- Part EN 61000-6-4 -
6-4: Generic standards - Emission
standard for industrial environments
IEC 61558 series Safety of power transformers, power EN IEC 61558 series
supplies, reactors and similar products
CISPR 14-1 2016 Electromagnetic compatibility - EN 55014-1 2017
Requirements for household appliances,
electric tools and similar apparatus - Part
1: Emission
CISPR 16-1-1 2015 Specification for radio disturbance and - -
immunity measuring apparatus and
methods - Part 1-1: Radio disturbance and
immunity measuring apparatus -
Measuring apparatus
CISPR 16-1-2 2014 Specification for radio disturbance and EN 55016-1-2 2014
immunity measuring apparatus and
methods - Part 1-2: Radio disturbance and
immunity measuring apparatus - Coupling
devices for conducted disturbance
measurements
4

---------------------- Page: 6 ----------------------
SIST EN IEC 62041:2020
EN IEC 62041:2020 (E)
Publication Year Title EN/HD Year
CISPR 16-1-4 2010 Specification for radio disturbance and EN 55016-1-4 2010
immunity measuring apparatus and
methods - Part 1-4: Radio disturbance and
immunity measuring apparatus - Antennas
and test sites for radiated disturbance
measurements
CISPR 16-2-1 2014 Specification for radio disturbance and EN 55016-2-1 2014
immunity measuring apparatus and
methods - Part 2-1: Methods of
measurement of disturbances and
immunity - Conducted disturbance
measurements
CISPR 16-2-3 2016 Specification for radio disturbance and EN 55016-2-3 2017
immunity measuring apparatus and
methods - Part 2-3: Methods of
measurement of disturbances and
immunity - Radiated disturbance
measurements
CISPR 16-4-2 -  Specification for radio disturbance and EN 55016-4-2 -
immunity measuring apparatus and
methods - Part 4-2: Uncertainties, statistics
and limit modelling - Measurement
instrumentation uncertainty
CISPR 32 2015 Electromagnetic compatibility of multimedia EN 55032 2015
equipment - Emission requirements

5

---------------------- Page: 7 ----------------------
SIST EN IEC 62041:2020

---------------------- Page: 8 ----------------------
SIST EN IEC 62041:2020



IEC 62041

®


Edition 3.0 2017-08




INTERNATIONAL



STANDARD



















Transformers, power supplies, reactors and similar products – EMC

requirements



























INTERNATIONAL

ELECTROTECHNICAL


COMMISSION





ICS 29.180; 33.100.01 ISBN 978-2-8322-4634-4



  Warning! Make sure that you obtained this publication from an authorized distributor.


® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 9 ----------------------
SIST EN IEC 62041:2020
– 2 – IEC 62041:2017 © IEC 2017
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms, definitions and abbreviations . 8
3.1 Terms and definitions . 8
3.2 Abbreviations . 9
4 General considerations . 10
4.1 Categories . 10
4.2 Measurement uncertainty . 10
4.3 Routine tests (production tests) . 11
5 Product documentation . 11
6 Applicability . 11
7 Test equipment . 12
8 Conditions during testing . 12
9 Measurement procedures . 12
9.1 Emission . 12
9.2 Immunity . 12
10 Performance criteria . 13
11 Requirements . 14
11.1 Immunity . 14
11.2 Emission . 14
Annex A (informative) Tables for immunity and emission limits . 16
Bibliography . 30

Figure 1 – Ports covered by Table A.1 to Table A.16 . 9

Table 1 – Additional acceptance limit for statistical determination . 10
Table 2 – Values of k according to CISPR TR 16-4-3:2004, Table C.1 . 11
E
Table 3 – Uncertainties for emission tests . 11
Table A.1 – Immunity requirements for enclosure ports for equipment intended for use
in residential, commercial and light-industrial environments according to IEC 61000-6-1 . 16
Table A.2 – Immunity requirements for enclosure ports for equipment intended for use
in industrial environments according to IEC 61000-6-2 . 17
Table A.3 – Immunity requirements for signal ports for equipment intended for use in
residential, commercial and light-industrial environments according to IEC 61000-6-1 . 17
Table A.4 – Immunity requirements for signal ports for equipment intended for use in
industrial environments according to IEC 61000-6-2 . 18
Table A.5 – Immunity requirements at input and output DC power ports for equipment
intended for use in residential, commercial and light-industrial environments according
to IEC 61000-6-1 . 19
Table A.6 – Immunity requirements at input and output DC power ports for equipment
intended for use in industrial environments according to IEC 61000-6-2. 20
Table A.7 – Immunity requirements at input and output AC power ports for equipment
intended for use in residential, commercial and light-industrial environments according
to IEC 61000-6-1 . 21

---------------------- Page: 10 ----------------------
SIST EN IEC 62041:2020
IEC 62041:2017 © IEC 2017 – 3 –
Table A.8 – Immunity requirements at input and output AC power ports for equipment
intended for use in industrial environments according to IEC 61000-6-2. 22
Table A.9 – Requirements for radiated emissions for equipment intended for use in
residential, commercial and light-industrial environments according to IEC 61000-6-3 . 23
Table A.10 – Requirements for radiated emissions ports for equipment intended for
use in industrial environments according to IEC 61000-6-4 . 24
Table A.11 – Requirements for conducted emissions from AC mains power ports for
equipment intended for use in residential, commercial and light-industrial environments
according to IEC 61000-6-3 . 27
Table A.12 – Requirements for conducted emissions from AC mains power ports
according to IEC 61000-6-4 . 27
Table A.13 – Requirements for conducted emissions from AC mains power ports for
equipment intended for use in residential, commercial and light-industrial environments
according to IEC 61000-6-3 . 28
Table A.14 – Requirements for conducted emissions from AC mains power ports for
equipment intended for use in industrial environments according to IEC 61000-6-4 . 28
Table A.15 – Requirements for conducted emissions from signal ports for equipment
intended for use in residential, commercial and light-industrial environments according
to IEC 61000-6-3 . 29
Table A.16 – Requirements for conducted emissions from signal ports for equipment
intended for use in industrial environments according to IEC 61000-6-4. 29

---------------------- Page: 11 ----------------------
SIST EN IEC 62041:2020
– 4 – IEC 62041:2017 © IEC 2017
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

TRANSFORMERS, POWER SUPPLIES, REACTORS
AND SIMILAR PRODUCTS –

EMC requirements

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International standard IEC 62041 has been prepared by Technical Committee 96:
Transformers, reactors, power supply units and combinations thereof.
This third edition cancels and replaces the second edition published in 2010. It constitutes a
technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
• the inclusion of a clause on tests in series production;
• the inclusion of a new clause on measurement uncertainly, and
• the status of a harmonized standard for this third edition.
It has the status of a product family EMC standard in accordance with IEC Guide 107:2009,

---------------------- Page: 12 ----------------------
SIST EN IEC 62041:2020
IEC 62041:2017 © IEC 2017 – 5 –
Electromagnetic compatibility – Guide to the drafting of electromagnetic compatibility
publications.
The text of this International Standard is based on the following documents:
FDIS Report on voting
96/465/FDIS 96/467/RVD

Full information on the voting for the approval of this International Standard can be found in
the report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
This standard is to be used in conjunction with the IEC 61558 series.
In this standard, the following print types are used:
• requirements proper: in roman type;
• test specifications: in italic type;
• explanatory matter: in smaller roman type.
In the text of this publication, the words in bold are defined in Clause 3 of this document and
in the IEC 61558 series.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.
NOTE The attention of the National Committees is drawn to the fact that equipment manufacturers and testing
organizations may need a transitional period following publication of a new, amended or revised IEC publication in
which to make products in accordance with the new requirements and to equip themselves for conducting new or
revised tests.
It is the recommendation of the committee that the content of this publication be adopted for implementation
nationally not earlier than 12 months or not later than 3 years from the date of publication.
The transitional period is no longer than 3 years after the publication of this standard.

---------------------- Page: 13 ----------------------
SIST EN IEC 62041:2020
– 6 – IEC 62041:2017 © IEC 2017
TRANSFORMERS, POWER SUPPLIES, REACTORS
AND SIMILAR PRODUCTS –

EMC requirements



1 Scope
This document is applicable to transformers, reactors and power supply units covered by the
IEC 61558 series of standards. This document deals with the electromagnetic compatibility
requirements for emission and immunity within the frequency range 0 Hz to 400 GHz. No tests
need to be performed at frequencies where no requirements are specified.
For associated transformers, associated reactors and associated power supply units either
supplied with or incorporated into an appliance or equipment the relevant EMC standard for
that appliance or equipment applies.
This document covers normal operating conditions only. Other operations of the transformers,
reactors and power supply units (e.g. simulated faults in the electric circuitry for testing
purposes or functional safety due to the effects of the electromagnetic phenomena, or
evaluation of human being for exposure to electromagnetic fields (EMF)) have not been taken
into consideration in this document.
Requirements are specified for each port considered. If requirements are different the most
severe takes precedence.
This document may also be used as a guide to test transformers, reactors and power supply
units separately before these are incorporated into an appliance or equipment.
NOTE When EUT (Equipment under test) is used, it covers transformers, reactors and power supply units
where applicable.
This document does not apply to:
• uninterruptible power supplies (UPS) covered by IEC 62040 (all parts);
• power supply units covered by IEC 61204,
(i.e. DC-DC converters, DC power and distribution equipment and power supply units for
use in applications covered by IEC 60950-1, IEC 61010-1, IEC 60601-1 and IEC 60065);
• power supplies and converters for use with or in products covered by IEC 61347 (all
parts).
2 Normative references
The following documents are referred to in the text in such a way that some or all of their
content constitutes requirements of this document. For dated references, only the edition
cited applies. For undated references, the latest edition of the referenced document (including
any amendments) applies.
IEC 60050-161, International Electrotechnical Vocabulary – Chapter 161: Electromagnetic
compatibility
IEC 61000-3-2, Electromagnetic compatibility (EMC) – Part 3-2: Limits – Limits for harmonic
current emissions (equipment input current ≤ 16 A per phase)

---------------------- Page: 14 ----------------------
SIST EN IEC 62041:2020
IEC 62041:2017 © IEC 2017 – 7 –
IEC 61000-3-3, Electromagnetic compatibility (EMC) – Part 3-3: Limits – Limitation of voltage
changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment
with rated current ≤ A per phase and not subject to conditional connection
IEC 61000-3-11, Electromagnetic compatibility (EMC) – Part 3-11: Limits – Limitation of
voltage changes, voltage fluctuations and flicker in public low-voltage supply systems –
Equipment with rated current ≤ 75 A and subject to conditional connection
IEC 61000-3-12, Electromagnetic compatibility (EMC) – Part 3-12: Limits – Limits for
harmonic currents produced by equipment connected to public low-voltage systems with input
current > 16 A and ≤ 75 A per phase
IEC 61000-4-2, Electromagnetic compatibility (EMC) – Part 4-2: Testing and measurement
techniques – Electrostatic discharge immunity test
IEC 61000-4-3, Electromagnetic compatibility (EMC) – Part 4-3 : Testing and measurement
techniques – Radiated, radio-frequency, electromagnetic field immunity test
IEC 61000-4-4, Electromagnetic compatibility (EMC) – Part 4-4: Testing and measurement
techniques – Electrical fast transient/burst immunity test
IEC 61000-4-5, Electromagnetic compatibility (EMC) – Part 4-5: Testing and measurement
techniques – Surge immunity test
IEC 61000-4-6, Electromagnetic compatibility (EMC) – Part 4-6: Testing and measurement
techniques – Immunity to conducted disturbances, induced by radio-frequency fields
IEC 61000-4-11, Electromagnetic compatibility (EMC) – Part 4-11: Testing and measurement
techniques – Voltage dips, short interruptions and voltage variations immunity tests
IEC 61000-4-34, Electromagnetic compatibility (EMC) – Part 4-34: Testing and measurement
techniques – Voltage dips, short interruptions and voltage variations immunity tests for
equipment with input current more than 16 A per phase
IEC 61000-6-1, Electromagnetic compatibility (EMC) – Part 6-1: Generic standards –
Immunity standard for residential, commercial and light-industrial environments
IEC 61000-6-2, Electromagnetic compatibility (EMC) – Part 6-2: Generic standards –
Immunity standard for industrial environments
IEC 61000-6-3, Electromagnetic compatibility (EMC) – Part 6-3: Generic standards –
Emission standard for residential, commercial and light-industrial environments
IEC 61000-6-4, Electromagnetic compatibility (EMC) – Part 6-4: Generic standards –
Emission standard for industrial environments
IEC 61558 (all pa
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.