oSIST prEN 3745-510:2024

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 510: Bending test

This document specifies a method of determining the attenuation variation of an optical cable during mechanical bending under load at the maximum and minimum operating temperatures.

Luft- und Raumfahrt - Faseroptische Leitungen für Luftfahrzeuge - Prüfverfahren - Teil 510: Biegetest

No Scope available

Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 510: Essai de courbure

No Scope available

Aeronavtika - Optična vlakna in kabli za uporabo v zračnih plovilih - Preskusne metode - 510. del: Upogibni preskus

General Information

• Status: Not Published
• Public Enquiry End Date: 14-May-2024
• ICS: 33.180.10 - Fibres and cables
• ICS: 49.060 - Aerospace electric equipment and systems
• ICS: 49.090 - On-board equipment and instruments
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 29-Feb-2024
• Due Date: 18-Jul-2024
• Ref Project: prEN 3745-510 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 510: Bending test

Relations

• Revises: SIST EN 3745-510:2017 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 510: Bending test
• Effective Date: 05-Jul-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 3745-510:2024
01-april-2024
Aeronavtika - Optična vlakna in kabli za uporabo v zračnih plovilih - Preskusne
metode - 510. del: Upogibni preskus
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 510:
Bending test
Luft- und Raumfahrt - Faseroptische Leitungen für Luftfahrzeuge - Prüfverfahren - Teil
510: Biegetest
Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais
- Partie 510: Essai de courbure
Ta slovenski standard je istoveten z: prEN 3745-510
ICS:
33.180.10 (Optična) vlakna in kabli Fibres and cables
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
oSIST prEN 3745-510:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 3745-510:2024

---------------------- Page: 2 ----------------------
oSIST prEN 3745-510:2024


DRAFT
EUROPEAN STANDARD
prEN 3745-510
NORME EUROPÉENNE

EUROPÄISCHE NORM

February 2024
ICS 49.060 Will supersede EN 3745-510:2017
English Version

Aerospace series - Fibres and cables, optical, aircraft use -
Test methods - Part 510: Bending test
Série aérospatiale - Fibres et câbles optiques à usage Luft- und Raumfahrt - Faseroptische Leitungen für
aéronautique - Méthodes d'essais - Partie 510 : Essai Luftfahrzeuge - Prüfverfahren - Teil 510: Biegetest
de courbure
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 3745-510:2024 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 3745-510:2024
prEN 3745-510:2024 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Preparation of specimens . 4
4.1 General. 4
4.2 Method A . 4
4.3 Method B . 5
5 Apparatus . 5
5.1 Method A .
...