Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats

This European standard specifies the characteristics of safety, construction, performance and efficiency, the test methods and marking, of room sealed space heating equipment of type C (see CEN/TR 1749) with combustion air intake and outlet for the products of combustion in the wall, roof or floor, combined or not. These are referred to in the body of the text as "heaters", burning LPG, for vehicles and boats. This European standard only covers room sealed heaters also including those which have a combustion air fan, an integral hot air fan or both, only for vehicles and boats which are used for residential, recreational and commercial purposes. This European standard applies to heaters which are installed either outside or inside the habitable volume, but which have a combustion circuit sealed from the vehicle's interior, and nominal heat input which does not exceed 10 kW (Hs) operated at supply pressure of 30 mbar, 28 mbar, 37 mbar and 50 mbar, using, where appropriate, 12 V or 24 V DC electrical supply. Room sealed LPG space heating appliances for vehicles and boats are using very often warm air as a heat transfer medium. Annex B specifies additional requirements for appliances using water as a heat transfer medium. For private cars and vehicles or boats used for the transport of dangerous goods or for commercial personnel transport additional requirements may be necessary. This European standard does not cover requirements for storage water heaters (boilers) (see EN 15033). For appliances producing additional sanitary hot water (combi-boilers), see relevant clauses of EN 15033. These heaters are also suitable for caravan holiday homes.

Festlegungen für flüssiggasbetriebene Geräte - Raumluftunabhängige Flüssiggas-Raumheizgeräte zum Einbau in Fahrzeugen und Booten

Diese Europäische Norm legt die Sicherheits-, Bau-, Leistungs- und Wirkungsgradeigenschaften, die
Prüfverfahren und die Kennzeichnung von mit Flüssiggas betriebenen raumluftunabhängigen
Raumheizgeräten des Typs C (siehe CEN/TR 1749) mit Verbrennungslufteinlass und Auslass für die
Verbrennungsprodukte in der Wand, im Dach oder im Boden, kombiniert oder nicht, im Hauptteil des Textes
als „Heizgeräte“ bezeichnet, für Fahrzeuge und Boote fest.
Diese Europäische Norm gilt nur für raumluftunabhängige Heizgeräte, einschließlich jener mit
gebläseunterstützter Verbrennung, Gebläse zur Heißluftverteilung oder beidem, für Fahrzeuge und Boote, die
zu Wohn-, Freizeit- und gewerblichen Zwecken betrieben werden.
Diese Europäische Norm ist anzuwenden auf Heizgeräte, die entweder außerhalb oder innerhalb des
Wohnbereichs eingebaut sind, deren Verbrennungsweg jedoch dicht gegenüber dem Fahrzeuginneren ist, mit
einer Nennwärmebelastung von nicht mehr als 10 kW (Hs), betrieben mit Anschlussdrücken von 28 mbar,
30 mbar, 37 mbar und 50 mbar bei, sofern zutreffend, 12 V oder 24 V Gleichstromanschluss.
Raumluft unabhängige Heizgeräte für Fahrzeuge und Boote verwenden oftmals Wasser als
Wärmeübertragungsmedium. Anhang B legt zusätzliche Anforderungen für Geräte, die Wasser als
Wärmeübertragungsmedium verwenden, fest.
Für Personenkraftwagen und Fahrzeugen oder Booten zur Beförderung gefährlicher Güter oder Fahrzeuge
zur gewerblichen Personenbeförderung können zusätzliche Anforderungen notwendig sein.Diese
Europäische Norm gilt nicht für Vorratswassererwärmer (Boiler) nach EN 15033. Für Geräte, die zusätzlich
Heißwasser bereitstellen (Kombinations-Boiler) siehe zutreffende Abschnitte der EN 15033.
ANMERKUNG Wird ein flüssiggasbetriebenes Heizgerät in ein Kraftfahrzeug eingebaut, das der Europäischen
Straßenverkehrsgesetzgebung unterliegt, sollten die Richtlinien des Rates zur Angleichung der Gesetze, Verordnungen
und Verwaltungsvorschriften der Mitgliedsstaaten bezüglich der Beheizung des Innenraumes von Kraftfahrzeugen
berücksichtigt werden.
Diese Heizgeräte sind auch für Mobilheime geeignet.

Spécification pour les appareils fonctionnant exclusivement aux GPL - Appareils de chauffage à circuit étanche fonctionnant aux GPL à installer dans les véhicules et bateaux

La présente Norme européenne définit les caractéristiques de sécurité, de construction, de fonctionnement et
de rendement, les méthodes d'essais et le marquage des appareils de chauffage à circuit étanche de type C
(voir CEN/TR 1749) comportant une amenée d'air de combustion et une évacuation des produits de
combustion dans le mur, la toiture ou le plancher, combinées ou non. Ces appareils sont désignés dans le
texte par « appareils de chauffage », fonctionnant aux GPL, pour véhicules et bateaux.
Cette Norme européenne ne s'applique qu’aux appareils de chauffage à circuit étanche, y compris ceux qui
sont munis d'un ventilateur de l'air de combustion, d'un ventilateur d'air chaud incorporé ou les deux, qui sont
destinés uniquement aux véhicules et aux bateaux utilisés à des fins de résidence, de loisirs ou à des fins
utilitaires.
La présente Norme européenne s'applique aux appareils de chauffage qui sont installés soit à l'extérieur, soit
à l'intérieur du volume habitable mais qui ont un circuit de combustion étanche par rapport à l'intérieur du
véhicule et un débit calorifique nominal ne dépassant pas 10 kW (Hs) et qui fonctionnent à des pressions
d'alimentation de 30 mbar, 28 mbar, 37 mbar et 50 mbar en utilisant, le cas échéant, une alimentation
électrique de 12 V ou 24 V cc.
Les appareils de chauffage à circuit étanche fonctionnant aux GPL pour les véhicules et les bateaux utilisent
très souvent l'air chaud comme moyen de transfert de la chaleur. L'Annexe B spécifie des exigences
supplémentaires pour les appareils qui utilisent l'eau comme moyen de transfert de la chaleur.
Pour les voitures et véhicules privés ou les bateaux utilisés pour le transport de marchandises
dangereuses ou pour le transport commercial de personnel, des exigences supplémentaires peuvent être
nécessaires.

Specifikacija za plinske aparate na utekočinjeni naftni plin - Grelne naprave za zaprte prostore za vgradnjo v vozila in čolne

Ta evropski standard določa značilnosti varnosti, konstrukcije, delovanja in učinkovitosti ter preskusne metode in označevanje za grelne naprave za zaprte prostore tipa C (glej CEN/TR 1749) z vnosom zraka za izgorevanje in izpustom za proizvode izgorevanja v steni, na strehi ali tleh, kombinirano ali ne. V glavnem besedilu se imenujejo »grelniki«, ki kurijo UNP, za vozila in čolne. Ta evropski standard zajema le grelnike za zaprte prostore, ki vključujejo tudi tiste z ventilatorjem za zrak za izgorevanje, vgrajeni ventilator za vroči zrak ali oboje, samo za vozila in čolne, ki se uporabljajo za bivalne, rekreativne ali komercialne namene. Ta evropski standard velja za grelnike, vgrajene zunaj bivalnega prostora ali v njem, a ki imajo krog zgorevanja zatesnjeno ločen od notranjosti vozila in nazivni toplotni vnos, ki ne presega 10 kW (Hs), ter delujejo pri dovodnem tlaku 30 mbar, 28 mbar, 37 mbar in 50 mbar, in, kot ustreza, uporabljajo električno napetost 12 V ali 24 V DC. Grelni aparati za zaprte prostore za vozila in čolne kot medij za prenos toplote pogosto uporabljajo topli zrak. Dodatek B določa dodatne zahteve za aparate, ki kot medij za prenos toplote uporabljajo vodo. Za osebne avtomobile in vozila ali čolne, ki se uporabljajo za prevoz nevarnega blaga, ali za komercialni prevoz oseb so lahko potrebne dodatne zahteve. Ta evropski standard ne zajema zahtev za akumulacijske grelnike vode (kotle) (glej EN 15033). Za aparate, ki proizvajajo dodatno sanitarno toplo vodo (kombinirani kotli), glej ustrezne točke EN 15033. Ti grelniki so primerni tudi za bivalne počitniške prikolice.

General Information

Status
Published
Public Enquiry End Date
19-Sep-2009
Publication Date
18-Aug-2011
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
13-Jun-2011
Due Date
18-Aug-2011
Completion Date
19-Aug-2011

Relations

Buy Standard

Standard
EN 624:2011
English language
58 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Festlegungen für flüssiggasbetriebene Geräte - Raumluftunabhängige Flüssiggas-Raumheizgeräte zum Einbau in Fahrzeugen und BootenSpécification pour les appareils fonctionnant exclusivement aux GPL - Appareils de chauffage à circuit étanche fonctionnant aux GPL à installer dans les véhicules et bateauxSpecification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats97.100.20Plinski grelnikiGas heaters47.020.90Marine ventilation, air-conditioning and heating systems43.040.60Karoserije in deli karoserijBodies and body componentsICS:Ta slovenski standard je istoveten z:EN 624:2011SIST EN 624:2011en,fr,de01-september-2011SIST EN 624:2011SLOVENSKI
STANDARDSIST EN 624:2002/A2:2007SIST EN 624:20021DGRPHãþD



SIST EN 624:2011



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 624
March 2011 ICS 43.040.60; 47.020.90; 97.100.20 Supersedes EN 624:2000English Version
Specification for dedicated LPG appliances -Room sealed LPG space heating equipment for installation in vehicles and boats
Spécification pour les appareils fonctionnant exclusivement aux GPL - Appareils de chauffage à circuit étanche fonctionnant aux GPL à installer dans les véhicules et bateaux
Festlegungen für flüssiggasbetriebene Geräte - Raumluftunabhängige Flüssiggas-Raumheizgeräte zum Einbau in Fahrzeugen und Booten This European Standard was approved by CEN on 8 January 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 624:2011: ESIST EN 624:2011



EN 624:2011 (E) 2 Contents Page Foreword .51 Scope .62 Normative references .63 Terms, definitions and symbols .73.1 Terms and definitions .73.2 Symbols . 134 Requirements . 144.1 Classification of gases . 144.2 Classification of heaters . 145 Safety, constructional and performance characteristics . 155.1 Conversion to different gases . 155.2 Materials . 155.3 Accessibility of components . 155.4 Strength of assembly . 165.5 Tightness . 165.5.1 Tightness of the gas carrying parts . 165.5.2 Tightness of combustion circuit . 165.6 Gas inlet connection . 165.7 Heater stability and fixing . 165.8 Taps and controls . 175.8.1 General . 175.8.2 Automatic shut-off valves . 175.9 Control handles . 185.10 Injectors . 185.11 Ignition devices . 185.12 Safety devices . 185.12.1 General . 185.12.2 Thermoelectric flame supervision devices . 195.12.3 Automatic burner control system . 195.13 Ducts for the products of combustion and cowls . 215.13.1 Combustion air supply inlet, flue outlet and wind protection device (cowl) . 215.13.2 Evacuation ducts for the products of combustion . 215.14 Verification of the heat input . 215.15 Temperature of various parts of the heater . 215.16 Temperature of the floor, walls or adjacent surfaces . 225.17 Temperature of taps and components . 225.18 Temperature of the products of combustion . 225.19 Ignition . 225.19.1 General . 225.19.2 Ignition performance . 235.20 Crosslighting . 235.20.1 General . 235.20.2 Cold condition . 235.20.3 Hot condition . 235.20.4 Crosslighting at low temperature. 235.20.5 Conditions of ignition burner flame shortening . 235.21 Flame stability . 245.21.1 Flame lift . 245.21.2 Light-back . 245.21.3 Sooting . 245.22 Combustion in still air . 24SIST EN 624:2011



EN 624:2011 (E) 3 5.23 Resistance to wind . 245.23.1 General . 245.23.2 Flame stability . 245.23.3 Ignition and crosslighting. 245.23.4 Combustion . 245.24 Efficiency . 245.25 Ignition and combustion in motion . 245.26 Prolonged performance test. 255.27 Electromagnetic compatibility . 256 Test methods . 256.1 General . 256.1.1 Reference and limit gases . 256.1.2 Test pressures . 266.1.3 Special national conditions . 266.1.4 Test installation . 266.2 Materials . 266.3 Accessibility of components . 266.4 Strength of assembly . 266.5 Tightness . 276.5.1 Tightness of the gas carrying parts . 276.5.2 Tightness of combustion circuit . 286.6 Connections . 296.7 Heater stability and fixing . 296.8 Taps and controls . 296.8.1 General . 296.8.2 Automatic shut-off valves. 296.9 Control handles . 296.10 Injectors . 296.11 Ignition devices . 296.12 Safety devices . 296.12.1 General . 296.12.2 Thermoelectric flame supervision devices . 306.12.3 Automatic burner control systems . 306.13 Ducts for the products of combustion and cowls . 326.13.1 Combustion air supply inlets, products of combustion outlets and wind protection devices. 326.13.2 Ducts for the products of combustion . 326.14 Verification of the nominal heat input . 326.15 Temperatures of various parts of the heater . 336.15.1 Test conditions . 336.15.2 Test method . 336.15.3 Measurement of temperature . 346.16 Temperatures of the support, walls and adjacent surfaces . 346.16.1 Test conditions . 346.16.2 Test methods . 346.16.3 Measurement of temperature . 346.17 Temperature of taps and components . 346.17.1 Test conditions . 346.17.2 Test methods . 346.17.3 Measurement of temperature . 346.18 Temperatures of the products of combustion. 356.19 Ignition . 356.19.1 General . 356.19.2 Ignition performance . 356.19.3 Maximum energy delayed ignition test . 356.20 Crosslighting . 356.20.1 General . 356.20.2 Cold condition . 366.20.3 Hot condition . 366.20.4 Crosslighting at low temperature . 36SIST EN 624:2011



EN 624:2011 (E) 4 6.20.5 Conditions of ignition burner flame shortening . 366.21 Flame stability . 366.21.1 Flame lift . 366.21.2 Light-back . 366.21.3 Sooting . 376.22 Combustion in still air . 376.23 Resistance to wind . 386.23.1 Wind generator and test installation. 386.23.2 Test conditions . 416.24 Efficiency . 436.25 Ignition and combustion in motion . 446.26 Prolonged performance test . 457 Marking and instruction literature . 457.1 Appliance . 457.1.1 Data plate . 457.1.2 Appliance warning labels . 467.2 Packaging . 467.3 Instructions for use and user maintenance . 477.4 Instructions for installation . 477.5 Servicing instructions . 48Annex A (normative)
Supply situation in various countries. 49Annex B (normative)
Appliances using water as a heat transfer medium . 52B.1 General . 52B.2 Requirements . 52 Mechanical strength . 52B.2.1 52B.2.2 Electrical safety. 52B.2.3 Mechanical safety elements . 52B.2.4 Materials . 53B.2.5 Bleed valve . 53B.3 Test methods . 53B.3.1 Mechanical strength . 53B.3.2 Electrical safety. 53B.3.3 Mechanical safety elements . 54B.3.4 Materials . 54B.3.5 Circulation pump . 54B.3.6 Compensator reservoir . 54B.3.7 Bleed valve . 54Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 2009/142/EC "Gas appliances" . 55Bibliography . 58 SIST EN 624:2011



EN 624:2011 (E) 5 Foreword This document (EN 624:2011) has been prepared by Technical Committee CEN/TC 181 “Dedicated LPG appliances”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2011, and conflicting national standards shall be withdrawn at the latest by September 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 624:2000. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. NOTE 1 Attention is drawn in particular to EN 1949, Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and in other road vehicles, in regard to the harmonization of operating pressures to be used in vehicles. NOTE 2 Test methods and means of assessment for Clause 5 are given in Clause 6. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 624:2011



EN 624:2011 (E) 6 1 Scope This European standard specifies the characteristics of safety, construction, performance and efficiency, the test methods and marking, of room sealed space heating equipment of type C (see CEN/TR 1749) with combustion air intake and outlet for the products of combustion in the wall, roof or floor, combined or not. These are referred to in the body of the text as "heaters", burning LPG, for vehicles and boats. This European standard only covers room sealed heaters also including those which have a combustion air fan, an integral hot air fan or both, only for vehicles and boats which are used for residential, recreational and commercial purposes.
This European standard applies to heaters which are installed either outside or inside the habitable volume, but which have a combustion circuit sealed from the vehicle's interior, and nominal heat input which does not exceed 10 kW (Hs) operated at supply pressure of 30 mbar, 28 mbar, 37 mbar and 50 mbar, using, where appropriate, 12 V or 24 V DC electrical supply. Room sealed LPG space heating appliances for vehicles and boats are using very often warm air as a heat transfer medium. Annex B specifies additional requirements for appliances using water as a heat transfer medium. For private cars and vehicles or boats used for the transport of dangerous goods or for commercial personnel transport additional requirements may be necessary. This European standard does not cover requirements for storage water heaters (boilers) (see EN 15033). For appliances producing additional sanitary hot water (combi-boilers), see relevant clauses of EN 15033.
NOTE If a LPG operated heater is installed in a motorized vehicle being subject to European road traffic legislation, the directives of the Council for the approximation of the laws, regulations and administrative provisions of the member states relating to the heating of the interior of motor vehicles should be applied. These heaters are also suitable for caravan holiday homes. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 161:2001, Automatic shut-off valves for gas burners and gas appliances EN 298:2003, Automatic gas burner control systems for gas burners and gas burning appliances with or without fans EN 437, Test gases — Test pressures — Appliance categories EN 549, Rubber materials for seals and diaphragms for gas appliances and gas equipment EN 1057, Copper an
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.