SIST EN ISO 4165:2004

Road vehicles - Electrical connections - Double-pole connection (ISO 4165:2001)

This International Standard specifies the dimensions and electrical characteristics of the double-pole connection
required for the interchangeability of the electrical connections used to supply additional appliances in road vehicles
with a nominal supply voltage of 12V or 24 V d.c.

Straßenfahrzeuge - Elektrische Verbindungen - Zweipolige Steckvorrichtung (ISO 4165:2001)

Diese Internationale Norm legt die Maße und elektronischen Eigenschaften der zweipoligen Steckverbindung fest, die für die Austauschbarkeit von elektrischen Steckverbindungen notwendig sind um zusätzliche Geräte in Straßenfahrzeugen mit einer Nenngleichspannung von 12 V oder 24 V zu versorgen.

Véhicules routiers - Connexions électriques - Connexion bipolaire (ISO 4165:2001)

La présente Norme internationale spécifie les dimensions et les caractéristiques électriques d'une connexion
bipolaire exigées pour l'interchangeabilité des connexions électriques utilisées pour les équipements
complémentaires des véhicules routiers dont la tension nominale est de 12 V 24 V ou continus.

Cestna vozila – Električni priključki – Dvopolne vtične naprave (ISO 4165:2001)

General Information

• Status: Published
• Publication Date: 31-Aug-2004
• ICS: 43.040.10 - Electrical and electronic equipment
• Technical Committee: SS SPL - Technical Board for the general field
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Sep-2004
• Due Date: 01-Sep-2004
• Completion Date: 01-Sep-2004
• Ref Project: EN ISO 4165:2003 - Road vehicles - Electrical connections - Double-pole connection (ISO 4165:2001)

Relations

• Replaces: SIST EN 24165:2000 - Road vehicles - Electrical connections - Double pole connector (ISO 4165:1979)
• Effective Date: 01-Sep-2004

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 4165:2004
01-september-2004
&HVWQDYR]LOD±(OHNWULþQLSULNOMXþNL±'YRSROQHYWLþQHQDSUDYH,62
Road vehicles - Electrical connections - Double-pole connection (ISO 4165:2001)
Straßenfahrzeuge - Elektrische Verbindungen - Zweipolige Steckvorrichtung (ISO
4165:2001)
Véhicules routiers - Connexions électriques - Connexion bipolaire (ISO 4165:2001)
Ta slovenski standard je istoveten z: EN ISO 4165:2003
ICS:
43.040.10 (OHNWULþQDLQHOHNWURQVND Electrical and electronic
RSUHPD equipment
SIST EN ISO 4165:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 4165:2004

---------------------- Page: 2 ----------------------

SIST EN ISO 4165:2004
EUROPEAN STANDARD
EN ISO 4165
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2003
ICS 43.040.10 Supersedes EN 24165:1991
English version
Road vehicles - Electrical connections - Double-pole connection
(ISO 4165:2001)
Véhicules routiers - Connexions électriques - Connexion Straßenfahrzeuge - Elektrische Verbindungen - Zweipolige
bipolaire (ISO 4165:2001) Steckverbindung (ISO 4165:2001)
This European Standard was approved by CEN on 20 February 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4165:2003 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 4165:2004
EN ISO 4165:2003 (E)
Foreword
The text of ISO 4165:2001 has been prepared by Technical Committee ISO/TC 22 "Road
vehicles” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 4165:2003 by CMC.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by November 2003, and conflicting national
standards shall be withdrawn at the latest by November 2003.
This document supersedes EN 24165:1991.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and
the United Kingdom.
Endorsement notice
The text of ISO 4165:2001 has been approved by CEN as EN ISO 4165:2003 without any
modifications.
2

---------------------- Page: 4 ----------------------

SIST EN ISO 4165:2004
INTERNATIONAL ISO
STANDARD 4165
Second edition
2001-12-01
Road vehicles — Electrical connections —
Double-pole connection
Véhicules routiers — Connexions électriques — Connexion bipolaire

Reference number
ISO 4165:2001(E)
©
ISO 2001

---------------------- Page: 5 ----------------------

SIST EN ISO 4165:2004
ISO 4165:2001(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be
edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file,
parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2001
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's
member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.ch
Printed in Switzerland
©
ii ISO 2001 – All rights reserved

---------------------- Page: 6 ----------------------

SIST EN ISO 4165:2004
ISO 4165:2001(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the te
...