SIST EN IEC 61918:2019/A12:2023
(Amendment)Industrial communication networks - Installation of communication networks in industrial premises
Industrial communication networks - Installation of communication networks in industrial premises
This document specifies basic requirements for the installation of media for communication networks within and between the automation islands, of industrial sites. This standard covers balanced and optical fibre cabling. It also covers the cabling infrastructure for wireless media, but not the wireless media itself. Additional media are covered in the IEC 61784-5 series.
This document is a companion standard to the communication networks of the industrial automation islands and especially to the communication networks specified in the IEC 61158 series and the IEC 61784 series.
In addition, this document covers the connection between the generic telecommunications cabling specified in ISO/IEC 11801-3 and the specific communication cabling of an automation island, where an automation outlet (AO) replaces the telecommunication outlet (TO) of ISO/IEC 11801-3.
NOTE If the interface used at the AO does not conform to that specified for the TO of ISO/IEC 11801-3, the cabling no longer conforms to ISO/IEC 11801-3 although certain features, including performance, of generic cabling may be retained.
This document provides guidelines that cope with the critical aspects of the industrial automation area (safety, security and environmental aspects such as mechanical, liquid, particulate, climatic, chemicals and electromagnetic interference).
This document does not recognise implementations of power distribution with or through Ethernet balanced cabling systems that are not specified in IEEE 802.3af and in IEEE 802.3at.
This document deals with the roles of planner, installer, verifier, and acceptance test personnel, administration and maintenance personnel and specifies the relevant responsibilities and/or gives guidance.
Industrielle Kommunikationsnetze – Installation von Kommunikationsnetzen in Industrieanlagen
Réseaux de communication industriels - Installation de réseaux de communication dans des locaux industriels
Industrijska komunikacijska omrežja - Inštalacija komunikacijskih omrežij v industrijskih okoljih - Dopolnilo A12
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 61918:2019/A12:2023
01-april-2023
Industrijska komunikacijska omrežja - Inštalacija komunikacijskih omrežij v
industrijskih okoljih - Dopolnilo A12
Industrial communication networks - Installation of communication networks in industrial
premises
Industrielle Kommunikationsnetze – Installation von Kommunikationsnetzen in
Industrieanlagen
Réseaux de communication industriels - Installation de réseaux de communication dans
des locaux industriels
Ta slovenski standard je istoveten z: EN IEC 61918:2018/A12:2023
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.110 Omreževanje Networking
SIST EN IEC 61918:2019/A12:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 61918:2019/A12:2023
---------------------- Page: 2 ----------------------
SIST EN IEC 61918:2019/A12:2023
EUROPEAN STANDARD EN IEC 61918:2018/A12
NORME EUROPÉENNE
EUROPÄISCHE NORM January 2023
ICS 25.040.40; 33.020; 35.240.50
English Version
Industrial communication networks - Installation of
communication networks in industrial premises
Réseaux de communication industriels - Installation de Industrielle Kommunikationsnetze - Installation von
réseaux de communication dans des locaux industriels Kommunikationsnetzen in Industrieanlagen
This amendment A12 modifies the European Standard EN IEC 61918:2018; it was approved by CENELEC on 2022-12-30. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of Nor
...
SLOVENSKI STANDARD
SIST EN IEC 61918:2019/oprAB:2022
01-oktober-2022
Industrijska komunikacijska omrežja - Inštalacija komunikacijskih omrežij v
industrijskih okoljih - Dopolnilo AB
Industrial communication networks - Installation of communication networks in industrial
premises
Industrielle Kommunikationsnetze – Installation von Kommunikationsnetzen in
Industrieanlagen
Réseaux de communication industriels - Installation de réseaux de communication dans
des locaux industriels
Ta slovenski standard je istoveten z: EN IEC 61918:2018/prAB
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.110 Omreževanje Networking
SIST EN IEC 61918:2019/oprAB:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 61918:2019/oprAB:2022
---------------------- Page: 2 ----------------------
SIST EN IEC 61918:2019/oprAB:2022
EUROPEAN STANDARD DRAFT
EN IEC 61918:2018
NORME EUROPÉENNE
EUROPÄISCHE NORM
prAB
July 2022
ICS 25.040.40; 33.020; 35.240.50 -
English Version
Industrial communication networks - Installation of
communication networks in industrial premises
Réseaux de communication industriels - Installation de Industrielle Kommunikationsnetze - Installation von
réseaux de communication dans des locaux industriels Kommunikationsnetzen in Industrieanlagen
This draft amendment prAB, if approved, will modify the European Standard EN IEC 61918:2018; it is submitted to CENELEC members for
enquiry.
Deadline for CENELEC: 2022-10-21.
It has been drawn up by CLC/TC 65X.
If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finla
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.