SIST EN 50632-2-14:2016

Electric motor-operated tools - Dust measurement procedure - Part 2-14: Particular requirements for planers

This European Standard applies to hand-held motor-operated electric tools and deals with the measurement procedure for planers for measurements of dust emission.

Motorbetriebene Elektrowerkzeuge - Staubmessverfahren - Teil 2-14: Besondere Anforderungen für Hobel

Outils électriques à moteur - Procédure de mesure de la poussière - Partie 2-14: Exigences particulières pour les raboteuses

L'article de la Partie 1 est applicable avec l'exception suivante:
Addition:
La présente partie de l'EN 50632 s'applique aux raboteuses.

Elektromotorna orodja - Postopek merjenja prahu - 2-14. del: Posebne zahteve za poravnalne skobeljnike

Ta evropski standard se uporablja za ročna elektromotorna orodja in obravnava postopek merjenja za poravnalne skobeljnike za izvajanje meritev emisije prahu.

General Information

• Status: Published
• Public Enquiry End Date: 30-Jun-2015
• Publication Date: 16-Aug-2016
• ICS: 25.100.25 - Tools for planing and broaching machines
• ICS: 25.140.20 - Electric tools
• Technical Committee: I09 - Imaginarni 09
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 28-Jul-2016
• Due Date: 02-Oct-2016
• Completion Date: 17-Aug-2016
• Ref Project: EN 50632-2-14:2016 - Electric motor-operated tools - Dust measurement procedure - Part 2-14: Particular requirements for planers

Relations

• Amended By: SIST EN 50632-2-14:2016/A1:2021 - Electric motor-operated tools - Dust measurement procedure - Part 2-14: Particular requirements for planers
• Effective Date: 01-Nov-2021

Overview

EN 50632-2-14:2016 is a CENELEC European standard that specifies the dust measurement procedure for hand‑held electric planers. It is Part 2-14 of the EN 50632 family and is intended to be used in conjunction with EN 50632-1:2015 (the general requirements for dust measurement). This Part 2 document defines particular requirements for planers to measure inhalable and respirable dust emissions during normal planing operations. The standard was approved in 2016 and was prepared by CLC/TC 116 “Safety of motor‑operated electric tools.”

Key topics

• Scope and applicability
  • Applies specifically to hand‑held motor‑operated planers for wood.
  • Supplements/modifies the clauses of EN 50632-1:2015 where needed.
• Definition
  • A planer is defined as a tool with a rotating cutting head whose axis is parallel to the base plate (fixed and adjustable shoe).
• Test procedure and operating conditions
  • Tests are performed under load with conditions given in Table 101 for planers intended to cut wood.
  • Workpiece: beech, length 400 ± 2 mm; width = planing width minus (15 ± 2) mm; thickness sufficient for one test cycle; wood humidity ≤ 12%.
  • Operation: plane the full 400 mm length at specified depth of cut.
  • Cutting depth: 0.5 mm or the maximum cutting depth if less than 0.5 mm.
  • Tool bits: new blades at the start of each of the three tests.
  • Feed force: sufficient for stable operation and good performance.
  • Test cycle: 80 planing operations equally distributed over the working time (example: 80 operations in 10 min → working speed 4.0 m/min).
• Instrumentation and reporting
  • Instrumentation and the information to be reported follow Part 1; this Part 2 points to those clauses where applicable.

Applications

• Practical use cases:
  • Manufacturer testing to quantify dust emissions from new planer models.
  • Independent test laboratories performing standardized dust emission measurements.
  • Safety managers and occupational hygienists assessing exposure risks from planers (inhalable and respirable fractions).
  • Procurement and compliance teams verifying that tools meet documented dust measurement procedures.
• Benefits:
  • Provides repeatable, comparable results for dust emission performance.
  • Supports product development, labeling, and risk assessment for woodworking tools.

Related standards

• EN 50632-1:2015 - General requirements for dust measurement for electric motor‑operated tools (to be used together with this Part 2).
• Document prepared by CLC/TC 116; consult national CENELEC members for national implementation and status.

Keywords: EN 50632-2-14:2016, planers, dust measurement procedure, electric motor‑operated tools, inhalable dust, respirable dust, Table 101, woodworking tools.

Standards Content (Sample)

SLOVENSKI STANDARD
01-oktober-2016
Elektromotorna orodja - Postopek merjenja prahu - 2-14. del: Posebne zahteve za
poravnalne skobeljnike
Electric motor-operated tools - Dust measurement procedure - Part 2-14: Particular
requirements for planers
Ta slovenski standard je istoveten z: EN 50632-2-14:2016
ICS:
25.100.25 Orodja za glajenje in Tools for planing and
ravnalna orodja broaching machines
25.140.20 (OHNWULþQDRURGMD Electric tools
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 50632-2-14

NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2016
ICS 13.040.40; 25.140.20
English Version
Electric motor-operated tools - Dust measurement procedure -
Part 2-14: Particular requirements for planers
Outils électriques à moteur - Procédure de mesure de la Motorbetriebene Elektrowerkzeuge - Staubmessverfahren -
poussière - Partie 2-14: Exigences particulières pour les Teil 2-14: Besondere Anforderungen für Hobel
raboteuses
This European Standard was approved by CENELEC on 2016-05-03. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 50632-2-14:2016 E
Contents
European foreword . 3
1 Scope . 4
2 Normative references. 4
3 Terms and definitions . 4
4 Test procedure . 4
5 Instrumentation . 5
6 Information to be reported . 5
Tables
Table 101 – Operating conditions for planers intended to cut wood . 5
European foreword
This document (EN 50632-2-14:2016) has been prepared by CLC/TC 116 "Safety of motor-oper
...