SIST EN 50632-2-19:2016/A1:2021
(Amendment)Electric motor-operated tools - Dust measurement procedure - Part 2-19: Particular requirements for jointers
Electric motor-operated tools - Dust measurement procedure - Part 2-19: Particular requirements for jointers
This European Standard specifies general requirements for the dust measurement of electric motor-operated tools supplied from mains or from batteries. This European Standard applies to those tools with and without dust extraction unit where dust such as mineral dust containing silica or wood dust is expected.
This part of EN 50632 sets particular requirements for jointers.
Motorbetriebene Elektrowerkzeuge - Staubmessverfahren - Teil 2 19: Besondere Anforderungen für Flachdübelfräsen
Outils électriques à moteur - Procédure de mesure de la poussière - Partie 2 19: Exigences particulières pour les mortaiseuses
No scope available
Elektromotorna orodja - Postopek meritve prahu - 2-19. del: Posebne zahteve za skobeljnike - Dopolnilo A1
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 50632-2-19:2016/A1:2021
01-november-2021
Elektromotorna orodja - Postopek meritve prahu - 2-19. del: Posebne zahteve za
skobeljnike - Dopolnilo A1
Electric motor-operated tools - Dust measurement procedure - Part 2-19: Particular
requirements for jointers
Motorbetriebene Elektrowerkzeuge - Staubmessverfahren - Teil 2 19: Besondere
Anforderungen für Flachdübelfräsen
Outils électriques à moteur - Procédure de mesure de la poussière - Partie 2 19:
Exigences particulières pour les mortaiseuses
Ta slovenski standard je istoveten z: EN 50632-2-19:2016/A1:2021
ICS:
25.100.25 Orodja za glajenje in Tools for planing and
ravnalna orodja broaching machines
25.140.20 Električna orodja Electric tools
SIST EN 50632-2-19:2016/A1:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 50632-2-19:2016/A1:2021
---------------------- Page: 2 ----------------------
SIST EN 50632-2-19:2016/A1:2021
EUROPEAN STANDARD EN 50632-2-19:2016/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2021
ICS 13.040.40; 25.140.20
English Version
Electric motor-operated tools - Dust measurement procedure -
Part 2-19: Particular requirements for jointers
Outils électriques à moteur - Procédure de mesure de la Motorbetriebene Elektrowerkzeuge - Staubmessverfahren -
poussière - Partie 2 19: Exigences particulières pour les Teil 2 19: Besondere Anforderungen für Flachdübelfräsen
mortaiseuses
This amendment A1 modifies the European Standard EN 50632-2-19:2016; it was approved by CENELEC on 2021-08-09. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 50632-2-19:2016/A1:2021 E
---------------------- Page: 3 ----------------------
SIST EN 50632-2-19:2016/A1:2021
EN 50632-2-19:2016/A1:2021 (E)
Contents Page
European foreword . 3
1 Modification to the European foreword . 4
2 Modification to 4.3, “Operating conditions” .
...
SLOVENSKI STANDARD
SIST EN 50632-2-19:2016/oprA1:2021
01-maj-2021
Elektromotorna orodja - Postopek meritve prahu - 2-19. del: Posebne zahteve za
skobeljnike - Dopolnilo A1
Electric motor-operated tools - Dust measurement procedure - Part 2-19: Particular
requirements for jointers
Motorbetriebene Elektrowerkzeuge - Staubmessverfahren - Teil 2 19: Besondere
Anforderungen für Flachdübelfräsen
Outils électriques à moteur - Procédure de mesure de la poussière - Partie 2 19:
Exigences particulières pour les mortaiseuses
Ta slovenski standard je istoveten z: EN 50632-2-19:2016/prA1
ICS:
25.100.25 Orodja za glajenje in Tools for planing and
ravnalna orodja broaching machines
25.140.20 Električna orodja Electric tools
SIST EN 50632-2-19:2016/oprA1:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 50632-2-19:2016/oprA1:2021
---------------------- Page: 2 ----------------------
SIST EN 50632-2-19:2016/oprA1:2021
EUROPEAN STANDARD DRAFT
EN 50632-2-19:2016
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
March 2021
ICS 13.040.40; 25.140.20
English Version
Electric motor-operated tools - Dust measurement procedure -
Part 2-19: Particular requirements for jointers
Outils électriques à moteur - Procédure de mesure de la Motorbetriebene Elektrowerkzeuge - Staubmessverfahren -
poussière - Partie 2 19: Exigences particulières pour les Teil 2 19: Besondere Anforderungen für Flachdübelfräsen
mortaiseuses
This draft amendment prA1, if approved, will modify the European Standard EN 50632-2-19:2016; it is submitted to CENELEC members for
enquiry.
Deadline for CENELEC: 2021-06-18.
It has been drawn up by CLC/TC 116.
If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 72586 Ref. No. EN 50632-2-19:2016/prA1 E
---------------------- Page: 3 ----------------------
SIST EN 50632-2-19:2016/oprA1:2021
EN 50632-2-19:2016/prA1:2021 (E)
Contents Page
European foreword .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.