iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO 27913:2025

(Main)

Carbon dioxide capture, transportation and geological storage - Pipeline transportation systems (ISO 27913:2024)

Carbon dioxide capture, transportation and geological storage - Pipeline transportation systems (ISO 27913:2024)

This document specifies the requirements and recommendations for the transportation of CO2 streams from the capture site to the storage facility where it is primarily stored in a geological formation or used for other purposes (e.g. for enhanced oil recovery or CO2 use).
This document applies to the transportation of CO2 streams by
—     rigid metallic pipelines,
—     pipeline systems,
—     onshore and offshore pipelines for the transportation of CO2 streams,
—     conversion of existing pipelines for the transportation of CO2 streams, and
—     transportation of CO2 streams in the gaseous and dense phases.
This document also includes aspects of CO2 stream quality assurance, as well as converging CO2 streams from different sources.
Health, safety and environment aspects specific to CO2 transport and monitoring are also considered in this document.
Transportation of CO2 via ship, rail or on road is not covered in this document.

Abscheidung, Transport und geologische Speicherung von Kohlenstoffdioxid - Rohrleitungstransportsysteme (ISO 27913:2024)

Captage, transport et stockage géologique du dioxyde de carbone - Systèmes de transport par conduites (ISO 27913:2024)

Le présent document spécifie des exigences et des recommandations sur les conduites, applicables au transport de flux de CO2 du site de captage jusqu’à l’installation de stockage où il est principalement stocké dans des formations géologiques ou utilisé à d’autres fins (par exemple, pour une récupération assistée des hydrocarbures ou une utilisation du CO2).
Le présent document s’applique au transport de flux de CO2 par:
—     conduites métalliques rigides;
—     réseaux de conduites;
—     conduites terrestres et en mer destinées au transport de flux de CO2;
—     conversion de conduites existantes pour le transport de flux de CO2; et
—     transport de flux de CO2 en phase gazeuse et en phase dense.
Le présent document inclut également des aspects d’assurance qualité du flux de CO2 et traite de la convergence de flux de CO2 provenant de différentes sources.
Les aspects liés à la santé, la sécurité et l’environnement spécifiques à la surveillance et au transport du CO2 sont également pris en compte dans le présent document.
Le transport du CO2 par voie maritime, ferroviaire ou routière n’est pas traité dans le présent document.

Zajetje, transport in geološko shranjevanje ogljikovega dioksida - Transportni cevovodni sistemi (ISO 27913:2024)

General Information

Status
Published
Public Enquiry End Date
09-Jun-2025
Publication Date
25-Jun-2025
ICS
13.020.40 - Pollution, pollution control and conservation
Technical Committee
I13 - Imaginarni 13
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
19-Jun-2025
Due Date
24-Aug-2025
Completion Date
26-Jun-2025
Ref Project
EN ISO 27913:2025 - Carbon dioxide capture, transportation and geological storage - Pipeline transportation systems (ISO 27913:2024)

Buy Standard

EN ISO 27913:2025EN ISO 27913:2025
PreviousNext
Standard
EN ISO 27913:2025
English language
57 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-september-2025
Zajetje, transport in geološko shranjevanje ogljikovega dioksida - Transportni
cevovodni sistemi (ISO 27913:2024)
Carbon dioxide capture, transportation and geological storage - Pipeline transportation
systems (ISO 27913:2024)
Abscheidung, Transport und geologische Speicherung von Kohlenstoffdioxid -
Rohrleitungstransportsysteme (ISO 27913:2024)
Captage, transport et stockage géologique du dioxyde de carbone - Systèmes de
transport par conduites (ISO 27913:2024)
Ta slovenski standard je istoveten z: EN ISO 27913:2025
ICS:
13.020.40 Onesnaževanje, nadzor nad Pollution, pollution control
onesnaževanjem in and conservation
ohranjanje
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 27913
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2025
EUROPÄISCHE NORM
ICS 13.020.40
English Version
Carbon dioxide capture, transportation and geological
storage - Pipeline transportation systems (ISO
27913:2024)
Captage, transport et stockage géologique du dioxyde Abscheidung, Transport und geologische Speicherung
de carbone - Systèmes de transport par conduites (ISO von Kohlenstoffdioxid - Rohrleitungstransportsysteme
27913:2024) (ISO 27913:2024)
This European Standard was approved by CEN on 9 June 2025.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 27913:2025 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
European foreword
The text of ISO 27913:2024 has been prepared by Technical Committee ISO/TC 265 "Carbon dioxide
capture, transportation, and geological storage” of the International Organization for Standardization
(ISO) and has been taken over as EN ISO 27913:2025 by Technical Committee CEN/TC 474 “Carbon
dioxide Capture, transportation, Utilisation, and Storage (CCUS)” the secretariat of which is held by
NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2025, and conflicting national standards
shall be withdrawn at the latest by December 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 27913:2024 has been approved by CEN as EN ISO 27913:2025 without any modification.

International
Standard
ISO 27913
Second edition
Carbon dioxide capture,
2024-10
transportation and
geological storage — Pipeline
transportation systems
Captage, transport et stockage géologique du dioxyde de
carbone — Systèmes de transport par conduites
Reference number
ISO 27913:2024(en) © ISO 2024
ISO 27913:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 27913:2024(en)
Contents Page
Foreword .vi
Introduction .vii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols and abbreviated terms. 5
4.1 Symbols .5
4.2 Abbreviated terms .5
5 Properties of CO , CO streams and the mixing of CO streams that influence pipeline
2 2 2
transportation . 6
5.1 General .6
5.2 Pure CO .6
5.2.1 Thermodynamics .6
5.2.2 Chemical reactions and corrosion .6
5.3 CO streams .7
5.3.1 Thermodynamics .7
5.3.2 Chemical reactions .7
6 Concept development and design criteria . 7
6.1 General .7
6.2 Safety philosophy .7
6.3 Reliability and availability of CO stream pipeline systems .8
6.4 Short-term storage reserve .8
6.5 Access to the pipeline system . .8
6.6 System design principles .9
6.6.1 General .9
6.6.2 CO stream specification .9
6.6.3 Pressure control and protection system .10
6.7 General principles to avoid internal pipeline corrosion .10
6.7.1 Particular aspects related to CO streams .10
6.7.2 Maximum water content .10
6.7.3 Avoidance of hydrate formation .10
6.7.4 Measurement of water content in the CO stream .11
6.8 Flow assurance .11
6.8.1 General .11
6.8.2 Operation under single-phase flow conditions during normal operation .11
6.8.3 Pipeline operation under multi-phase flow conditions during transient
operations . . 12
6.8.4 Planned and unscheduled pipeline pressure release . 12
6.8.5 Reduced flow capacity. 13
6.8.6 Available transport capacity . 13
6.8.7 Flow coating . 13
6.8.8 External thermal insulation .14
6.8.9 Leak detection .14
6.8.10 Fugitive emissions .14
6.8.11 Impurities .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 14083:2023(Main)
Greenhouse gases - Quantification and reporting of greenhouse gas emissions arising from transport chain operations (ISO 14083:2023)
EN ISO 14083:2023

This document establishes a common methodology for the quantification and reporting of greenhouse gas (GHG) emissions arising from the operation of transport chains of passengers and freight.

  • Standard
    133 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 18557:2020(Main)
Characterisation principles for soils, buildings and infrastructures contaminated by radionuclides for remediation purposes (ISO 18557:2017)
EN ISO 18557:2020

ISO 18557 presents guidelines for sampling strategies and characterization processes to assess the contamination of soils, buildings and infrastructures, prior to remediation and/or to check that the remediation objectives have been met (final release surveys). The principles presented need to be appropriately graded as regards the specific situations concerned (size, level of contamination?). It can be used in conjunction with each country's key documentation.
ISO 18557 deals with characterization in relation to site remediation. It applies to sites contaminated after normal operation of older nuclear facilities. It could also apply to site remediation after a major accident, and in this case the input data will be linked to the accident involved.
ISO 18557 complements existing standards, notably concerning sampling, sample preservation and their transport, treatment and laboratory measurements, but also those related to in situ chemical and radiological measurements. References in the Bibliography contain links to appropriate documentation and techniques as required by individual member countries.
ISO 18557 does not apply to the following issues: execution of clean-up works, sampling and characterization of waste (conditioned or unconditioned) or to waste packages.
It does not apply to groundwater characterization (saturated zone).
Given the case-by-case nature of site remediation and decommissioning, the principles and guidance communicated in ISO 18557 are intended as general guidance only, not prescriptive requirements.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
kSIST FprEN 18074:2025(Main)
Industrial decarbonization - Requirements and guidelines for sectoral transition plans
FprEN 18074

This document specifies the requirements and recommendations relative to the construction of a sectoral transition plan for industry decarbonization.
This document does not specify the requirements for the construction of a roadmap of single industrial company’s transition plan (a plant or a group), however a sectoral transition plan can be used as a reference in an entity transition plan
This document is intended to be used by organizations, including national and public bodies, trade associations, federations, companies and NGOs that wish to establish or monitor sectoral decarbonization plans.
This document is climate-programme neutral. If a climate programme is applicable, requirements of this programme are additional to the requirement of this document.
This document does not address legal and other obligations relating to climate action.
In this document, either natural or technological sequestrations occur inside the geographical and sectoral boundaries considered in the sectoral transition plan. Otherwise, they are excluded.
In this document, considering its energy consumptions and its cost, the direct air capture and storage technology (DACS) is not considered relevant and is excluded from the sectoral transition plan.
Carbon offsets are excluded from this document.
NOTE   Carbon offsets are intended as be understood as "Emissions reduction or removal resulting from an action outside the geographical and sectoral boundary used to counterbalance the sector’s residual emissions".

  • Draft
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15522-2:2023+A1:2025(Main + Amendment)
Oil spill identification - Petroleum and petroleum related products - Part 2: Analytical method and interpretation of results based on GC-FID and GC-low resolution-MS analyses
EN 15522-2:2023+A1:2025

This document specifies a method to identify and compare the compositional characteristics of oil samples. Specifically, it describes the detailed analytical and data processing methods for identifying the characteristics of spill samples and establishing their correlation to suspected source oils. Even when samples or data from suspected sources are not available for comparison, establishing the specific nature (e.g. refined petroleum, crude oil, waste oil, etc.) of the spilled oil still helps to constrain the possible source(s).
This methodology is restricted to petroleum related products containing a significant proportion of hydrocarbon-components with a boiling point above 150 °C. Examples are: crude oils, higher boiling condensates, diesel oils, residual bunker or heavy fuel oils, lubricants, and mixtures of bilge and sludge samples, as well as distillate fuels and blends. While the specific analytical methods are perhaps not appropriate for lower boiling oils (e.g. kerosene, jet fuel, or gasoline), the general concepts described in this methodology, i.e. statistical comparison of weathering-resistant diagnostic ratios, are applicable in spills involving these kinds of oils.
Paraffin based products (e.g. waxes, etc.) are outside the scope of this method because too many compounds are removed during the production process [37]. However, the method can be used to identify the type of product involved.
Although not directly intended for identifying oil recovered from groundwater, vegetation, wildlife/tissues, soil, or sediment matrices, they are not precluded. However, caution is needed as extractable compounds can be present in these matrices that alter and/or contribute additional compounds compared to the source sample. If unrecognized, the contribution from the matrix can lead to false “non-matches”. It is therefore advisable to analyse background sample(s) of the matrix that appear unoiled.
When analysing “non-oil” matrices additional sample preparation (e.g. clean-up) is often required prior to analysis and the extent to which the matrix affects the correlation achieved is to be considered. Whether the method is applicable for a specific matrix depends upon the oil concentration compared to the “matrix concentration”. In matrices containing high concentrations of oil, a positive match can still be concluded. In matrices containing lower concentrations of oil, a false “non-match” or an “inconclusive match” can result from matrix effects. Evaluation of possible matrix effects is beyond the scope of this document.

  • Standard
    218 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 24212:2025(Main)
Remediation techniques applied at contaminated sites (ISO 24212:2024)
EN ISO 24212:2024

This document provides requirements and guidance on key aspects of remediation techniques. It describes the principles, main characteristics, advantages and limitations to be considered in the selection within an option appraisal of individual or combinations of in situ and on-site remediation techniques, including:
—     the type of contaminants to be dealt with;
—     current and/or intended site use;
—     local legal, policy, socio-economic and environmental contexts.
This document is applicable to the remediation of contaminated sites, i.e. where soil, or soil gas, ambient air or groundwater are contaminated. It identifies which phase/matrix can be targeted by a technique, e.g. fluid (groundwater, gas, non-aqueous phase liquid) or solid, and which contaminant it can applied to. This document also provides information on hazards that can be associated with the implementation of remediation.
This document does not provide:
—     an exhaustive list of remediation techniques;
—     guidance on sites contaminated with radioactive substances, pathogenic or infectious agents, or “pyrotechnic devices” (e.g. unexploded ordnances);
—     guidance on ex situ techniques that are set up off-site;
—     a framework that covers all individual situations, or prescribes which technique(s) to use in a specific context.

  • Standard
    111 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13523-29:2024(Main)
Coil coated metals - Test methods - Part 29: Resistance to environmental soiling (Dirt pick-up and striping)
EN 13523-29:2024

This part of the EN 13523 series specifies a procedure for the comparative evaluation of resistance to soiling of an organic coating on a metallic substrate (coil coating) in an outdoor exposure environment, particularly the soiling defect known as "Tiger stripes".

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 4484-3:2023(Main)
Textiles and textile products - Microplastics from textile sources - Part 3: Measurement of collected material mass released from textile end products by domestic washing method (ISO 4484-3:2023)
EN ISO 4484-3:2023

This document specifies a method for measuring the collected material mass released from the outlet hose of a standard washing machine, described in ISO 6330, through the washing process.
NOTE            The washing condition of textile end products is indicated by the care labelling according to ISO 3758.
This document is applicable to textile end products (including consumer textile products, such as clothing made of fleece, shirts, trousers, blouse, etc.) and home textile end products (such as, blankets, rugs, curtains, etc.) which are composed of all fibres such as natural fibres, and man-made fibres, including mixture of the fibres that can be washed in a domestic washing machine.
This document is not applicable to fabrics and cut textile products. It does not cover the test for washing machines and detergents as well.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 14083:2023(Main)
Greenhouse gases - Quantification and reporting of greenhouse gas emissions arising from transport chain operations (ISO 14083:2023)
EN ISO 14083:2023

This document establishes a common methodology for the quantification and reporting of greenhouse gas (GHG) emissions arising from the operation of transport chains of passengers and freight.

  • Standard
    133 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15522-1:2023(Main)
Oil spill identification - Petroleum and petroleum related products - Part 1: Sampling
EN 15522-1:2023

This document provides guidance on taking and handling samples related to oil spill identification in legal proceedings. Guidance is given on obtaining samples from both the spill and its potential source.
Preservation of evidence is an essential part of legal procedures and this document presents appropriate oil sampling procedures.
WARNING - The use of this document can involve hazardous materials, operations and equipment.
This document does not purport to address all of the safety problems associated with its use. It is the responsibility of users of this document to take appropriate measures to ensure the safety and health of personnel prior to the application of the standard, and to determine the applicability of any other restrictions for this purpose.
IMPORTANT - Most countries have teams with specialists trained in sampling on board of ships. Do not take unnecessary risks, seek assistance from such teams where available.
NOTE   For the sake of clarity, the word ‘oil’ is used throughout this document. It can equally refer to crude oil, a petroleum product or mixtures of such.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 4484-1:2023(Main)
Textiles and textile products - Microplastics from textile sources - Part 1: Determination of material loss from fabrics during washing (ISO 4484-1:2023)
EN ISO 4484-1:2023

This document describes a method for systematically collecting material loss from fabrics under laundering test conditions to achieve comparable and accurate results. There is no direct correlation to material loss during domestic and commercial laundering. The method is designed to assess material loss of all types.
NOTE      In this document, any collected debris is assumed to be fibre fragments. For the identification of the nature/composition of this debris, the method described in ISO 4484-2 can be used.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day