Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes - Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test results (ISO 11296-4:2018/Amd 1:2021)

2021-02-11 - TC decision is missing to skip FV.

Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten drucklosen Entwässerungsnetzen (Freispiegelleitungen) - Teil 4: Vor Ort härtendes Schlauch-Lining - Änderung 1: Aktualisierung von Begriffen, Anforderungen an Kennzeichnungen und Verfahren für die alternative Angabe von Ergebnissen des Biegeversuchs (ISO 11296-4:2018/Amd 1:2021)

No scope available

Systèmes de canalisations en plastique pour la rénovation des réseaux de branchements et de collecteurs d'assainissement enterrés sans pression - Partie 4: Tubage continu par tubes polymérisés sur place - Amendement 1: Actualisation des définitions, des exigences de marquage, et de la procédure pour une autre expression des propriétés de flexion (ISO 11296-4:2018/Amd 1:2021)

Cevni sistemi iz polimernih materialov za obnovo podzemnih omrežij za odvodnjavanje in kanalizacijo za obratovanje brez tlaka (vodi s prosto gladino) - 4. del: Oblaganje s cevmi, utrjenimi na mestu vgradnje - Dopolnilo A1: Posodobljene definicije, zahteve za označevanje in alternativno navajanje rezultatov upogibnega preskusa (ISO 11296-4:2018/Amd 1:2021)

General Information

Status
Published
Public Enquiry End Date
19-Sep-2020
Publication Date
09-Jun-2021
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
03-Jun-2021
Due Date
08-Aug-2021
Completion Date
10-Jun-2021

RELATIONS

Buy Standard

Amendment
SIST EN ISO 11296-4:2018/A1:2021 - naslovnica brez FR-naslova (predolgi naslovi, zato se naslovnica prstavi na dve strani)
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day
Amendment
SIST EN ISO 11296-4:2018/oprA1:2020 - naslovnica brez FR-naslova (predolgi naslovi, zato se naslovnica prstavi na dve strani)
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 11296-4:2018/A1:2021
01-julij-2021
Cevni sistemi iz polimernih materialov za obnovo podzemnih omrežij za

odvodnjavanje in kanalizacijo za obratovanje brez tlaka (vodi s prosto gladino) - 4.

del: Oblaganje s cevmi, utrjenimi na mestu vgradnje - Dopolnilo A1: Posodobljene

definicije, zahteve za označevanje in alternativno navajanje rezultatov upogibnega

preskusa (ISO 11296-4:2018/Amd 1:2021)
Plastics piping systems for renovation of underground non-pressure drainage and

sewerage networks - Part 4: Lining with cured-in-place pipes - Amendment 1: Updated

definitions, marking requirements and procedure for alternative expression of flexural

test results (ISO 11296-4:2018/Amd 1:2021)
Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten drucklosen

Entwässerungsnetzen (Freispiegelleitungen) - Teil 4: Vor Ort härtendes Schlauch-Lining

- Änderung 1: Aktualisierung von Begriffen, Anforderungen an Kennzeichnungen und

Verfahren für die alternative Angabe von Ergebnissen des Biegeversuchs (ISO 11296-

4:2018/Amd 1:2021)
Ta slovenski standard je istoveten z: EN ISO 11296-4:2018/A1:2021
ICS:
23.040.05 Cevovodi za zunanje Pipeline and its parts for
sisteme za odpadno vodo in external sewage systems
njihovi deli
91.140.80 Drenažni sistemi Drainage systems
93.030 Zunanji sistemi za odpadno External sewage systems
vodo
SIST EN ISO 11296-4:2018/A1:2021 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 11296-4:2018/A1:2021
---------------------- Page: 2 ----------------------
SIST EN ISO 11296-4:2018/A1:2021
EN ISO 11296-4:2018/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2021
EUROPÄISCHE NORM
ICS 23.040.20; 23.040.45; 91.140.80; 93.030
English Version
Plastics piping systems for renovation of underground
non-pressure drainage and sewerage networks - Part 4:
Lining with cured-in-place pipes - Amendment 1: Updated
definitions, marking requirements and procedure for
alternative expression of flexural test results (ISO 11296-
4:2018/Amd 1:2021)

Systèmes de canalisations en plastique pour la Kunststoff-Rohrleitungssysteme für die Renovierung

rénovation des réseaux de branchements et de von erdverlegten drucklosen Entwässerungsnetzen

collecteurs d'assainissement enterrés sans pression - (Freispiegelleitungen) - Teil 4: Vor Ort härtendes

Partie 4: Tubage continu par tubes polymérisés sur Schlauch-Lining - Änderung 1: Aktualisierung von

place - Amendement 1: Actualisation des définitions, Begriffen, Anforderungen an Kennzeichnungen und

des exigences de marquage, et de la procédure pour Verfahren für die alternative Angabe von Ergebnissen

une autre expression des propriétés de flexion (ISO des Biegeversuchs (ISO 11296-4:2018/Amd 1:2021)

11296-4:2018/Amd 1:2021)

This amendment A1 modifies the European Standard EN ISO 11296-4:2018; it was approved by CEN on 24 December 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of

this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the

same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11296-4:2018/A1:2021 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 11296-4:2018/A1:2021
EN ISO 11296-4:2018/A1:2021 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

---------------------- Page: 4 ----------------------
SIST EN ISO 11296-4:2018/A1:2021
EN ISO 11296-4:2018/A1:2021 (E)
European foreword

This document (EN ISO 11296-4:2018/A1:2021) has been prepared by Technical Committee ISO/TC

138 "Plastics pipes, fittings and valves for the transport of fluids" in collaboration with Technical

Committee CEN/TC 155 “Plastics piping systems and ducting systems” the secretariat of which is held

by NEN.

This Amendment to the European Standard EN ISO 11296-4:2018 shall be given the status of a national

standard, either by publication of an identical text or by endorsement, at the latest by November 2021,

and conflicting national standards shall be withdrawn at the latest by November 2021.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,

Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,

Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of

North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the

United Kingdom.
Endorsement notice

The text of ISO 11296-4:2018/Amd 1:2021 has been approved by CEN as EN ISO 11296-

4:2018/A1:2021 without any modification.
---------------------- Page: 5 ----------------------
SIST EN ISO 11296-4:2018/A1:2021
---------------------- Page: 6 ----------------------
SIST EN ISO 11296-4:2018/A1:2021
INTERNATIONAL ISO
STANDARD 11296-4
Second edition
2018-02
AMENDMENT 1
2021-02
Plastics piping systems for renovation
of underground non-pressure
drainage and sewerage networks —
Part 4:
Lining with cured-in-place pipes
AMENDMENT 1: Updated definitions,
marking requirements and procedure
for alternative expression of flexural
test results
Systèmes de canalisations en plastique pour la rénovation des réseaux
de branchements et de collecteurs d'assainissement enterrés sans
pression —
Partie 4: Tubage continu par tubes polymérisés sur place
AMENDEMENT 1: Actualisation des définitions, des exigences
de marquage, et de la procédure pour une autre expression des
propriétés de flexion
Reference number
ISO 11296-4:2018/Amd.1:2021(E)
ISO 2021
---------------------- Page: 7 ----------------------
SIST EN ISO 11296-4:2018/A1:2021
ISO 11296-4:2018/Amd.1:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 11296-4:2018/A1:2021
ISO 11296-4:2018/Amd.1:2021(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www .iso .org/ patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the

World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/

iso/ foreword .html.

This document was prepared by Technical Committee ISO/TC 138, Plastics pipes, fittings and valves

for the transport of fluids, Subcommittee SC 8, Rehabilitation of pipeline systems, in collaboration with

the European Committee for Standardization (CEN) Technical Committee CEN/TC 155, Plastics piping

systems and ducting systems, in accordance with the Agreement on technical cooperation between ISO

and CEN (Vienna Agreement).
A list of all parts in the ISO 11296 series can be found on the ISO website.
Any feedback or questions on th
...

SLOVENSKI STANDARD
SIST EN ISO 11296-4:2018/oprA1:2020
01-september-2020
Cevni sistemi iz polimernih materialov za obnovo podzemnih omrežij za

odvodnjavanje in kanalizacijo za obratovanje brez tlaka (vodi s prosto gladino) - 4.

del: Oblaganje s cevmi, utrjenimi na mestu vgradnje - Dopolnilo A1: Posodobljene

definicije, zahteve za označevanje in alternativno navajanje rezultatov upogibnega

preskusa (ISO 11296-4:2018/DAM 1:2020)
Plastics piping systems for renovation of underground non-pressure drainage and

sewerage networks - Part 4: Lining with cured-in-place pipes - Amendment 1: Updated

definitions, marking requirements and procedure for alternative expression of flexural

test results (ISO 11296-4:2018/DAM 1:2020)
Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten drucklosen

Entwässerungsnetzen (Freispiegelleitungen) - Teil 4: Vor Ort härtendes Schlauch-Lining

- Änderung 1: Aktualisierung von Begriffen, Anforderungen an Kennzeichnungen und

Verfahren für die alternative Angabe von Ergebnissen des Biegeversuchs (ISO 11296-

4:2018/DAM 1:2020)
Ta slovenski standard je istoveten z: EN ISO 11296-4:2018/prA1
ICS:
23.040.05 Cevovodi za zunanje Pipeline and its parts for
sisteme za odpadno vodo in external sewage systems
njihovi deli
91.140.80 Drenažni sistemi Drainage systems
93.030 Zunanji sistemi za odpadno External sewage systems
vodo
SIST EN ISO 11296-4:2018/oprA1:2020 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 11296-4:2018/oprA1:2020
---------------------- Page: 2 ----------------------
SIST EN ISO 11296-4:2018/oprA1:2020
DRAFT AMENDMENT
ISO 11296-4:2018/DAM 1
ISO/TC 138/SC 8  Secretariat: JISC
Voting begins on:  Voting terminates on:
2020-07-16 2020-10-08
Plastics piping systems for renovation of underground
non-pressure drainage and sewerage networks —
Part 4:
Lining with cured-in-place pipes
AMENDMENT 1: Updated definitions, marking requirements
and procedure for alternative expression of flexural test results

Systèmes de canalisations en plastique pour la rénovation des réseaux de branchements et de collecteurs

d'assainissement enterrés sans pression —
Partie 4: Tubage continu par tubes polymérisés sur place

AMENDEMENT 1: Actualisation des définitions, des exigences de marquage, et de la procédure d’autre

expression des propriétés de flexion
ICS: 23.040.45; 93.030; 91.140.80; 23.040.20
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING  ACCEPTABLE  FOR  INDUSTRIAL,
TECHNOLOGICAL,  COMMERCIAL  AND
USER  PURPOSES,  DRAFT  INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 11296-4:2018/DAM 1:2020(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO  SUBMIT,  WITH  THEIR  COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. ISO 2020
---------------------- Page: 3 ----------------------
SIST EN ISO 11296-4:2018/oprA1:2020
ISO 11296-4:2018/DAM 1:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 4 ----------------------
SIST EN ISO 11296-4:2018/oprA1:2020
ISO 11296-4:2018/DAM 1:2020(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www .iso .org/ patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the

World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/

iso/ foreword .html.

This document was prepared by Technical Committee ISO/TC 138, Subcommittee SC 8, Rehabilitation of

pipeline systems.
A list of all parts in the ISO 11296 series can be found on the ISO website.

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www .iso .org/ members .html.
© ISO 2020 – All rights reserved  iii
---------------------- Page: 5 ----------------------
SIST EN ISO 11296-4:2018/oprA1:2020
---------------------- Page: 6 ----------------------
SIST EN ISO 11296-4:2018/oprA1:2020
ISO 11296-4:2018/DAM 1:2020(E)
Plastics piping systems for renovation of underground
non-pressure drainage and sewerage networks —
Part 4:
Lining with cured-in-place pipes
AMENDMENT 1: Updated definitions, marking requirements
and procedure for alternative expression of flexural test results
2 Normative references

Replace the references to ISO 178:2010+A1: 2013, ISO 10467:– , ISO 10468 and ISO 14125:1998+A1:

2011 with the following:
ISO 178:2019, Plastics — Determination of flexural properties

ISO 10467:2018, Plastics piping systems for pressure and non-pressure drainage and sewerage —

Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin

ISO 10468, Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the ring creep

properties under wet or dry conditions

ISO 14125:1998, Fibre-reinforced plastic composites — Determination of flexural properties

Delete ISO 7684 from the list. Delete footnote 1.
3 Terms and definitions
Replace 3.1.2, 3.1.3, 3.1.4, 3.1.12 and 3.1.15 with the following:
3.1.2
carrier material

porous component of the lining tube (3.1.11), which carries the liquid resin system (3.1.16) during

insertion into the pipe being renovated and forms part of the installed lining system once the resin

has been cured
3.1.3
CIPP product
cured-in-place pipe of a particular design, produced from a lining tube (3.1
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.