SIST EN 14852:2006
(Main)Aerosol containers - Determination of the ignition distance of the spray jet
Aerosol containers - Determination of the ignition distance of the spray jet
This European Standard describes a method of determining the maximum distance between the orifice of an aerosol container and a flame that results in ignition and sustained combustion of an aerosol spray. The standard applies to aerosol products that have a spray distance of 150 mm or more. It does not apply to aerosol containers fitted with a metering valve.
NOTE Aerosol products dispensed in the form of a foam, mousse, gel or paste which have a spray distance of less than 150 mm are specified in EN 14851.
Aerosolpackungen - Ermittlung des Entzündungsabstandes des Sprühstrahles
Récipients pour aérosols - Détermination de la distance d'inflammation du jet de pulvérisation
La présente Norme européenne décrit une méthode permettant de déterminer la distance maximale entre l’orifice d’un récipient pour aérosols et une flamme avant inflammation et combustion prolongée d’une pulvérisation d’aérosol. Cette norme s’applique aux produits en aérosol dont la distance de pulvérisation est d’au moins 150 mm. Elle ne s’applique pas aux récipients pour aérosol munis d’une valve doseuse.
NOTE Les produits en aérosol délivrés sous la forme d’une mousse, d’un gel ou d’une pâte, dont la distance de pulvérisation est inférieure a 150 mm sont spécifiés dans l’EN 14851.
Embalaža za aerosole – Določanje vžigne razdalje za razpršila
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 14852:2006
01-februar-2006
(PEDODåD]DDHURVROH±'RORþDQMHYåLJQHUD]GDOMH]DUD]SUãLOD
Aerosol containers - Determination of the ignition distance of the spray jet
Aerosolpackungen - Ermittlung des Entzündungsabstandes des Sprühstrahles
Récipients pour aérosols - Détermination de la distance d'inflammation du jet de
pulvérisation
Ta slovenski standard je istoveten z: EN 14852:2005
ICS:
13.220.40 Sposobnost vžiga in Ignitability and burning
obnašanje materialov in behaviour of materials and
proizvodov pri gorenju products
55.130 3ORþHYLQNH]DDHURVROH Aerosol containers
SIST EN 14852:2006 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 14852:2006
---------------------- Page: 2 ----------------------
SIST EN 14852:2006
EUROPEAN STANDARD
EN 14852
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2005
ICS 13.220.40; 55.130
English Version
Aerosol containers - Determination of the ignition distance of the
spray jet
Récipients pour aérosol - Détermination de la distance Aerosolpackungen - Ermittlung des Entzündungsabstandes
d'inflammation du jet de pulvérisation des Sprühstrahles
This European Standard was approved by CEN on 14 October 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14852:2005: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 14852:2006
EN 14852:2005 (E)
Contents Page
1 Scope.4
2 Terms and definitions.4
3 Principle.4
4 Apparatus.4
5 Test conditions.4
6 Preparation of test apparatus .5
7 Test sequence.5
8 Test procedure.5
9 Test report.7
2
---------------------- Page: 4 ----------------------
SIST EN 14852:2006
EN 14852:2005 (E)
Foreword
This document (EN 14852:2005) has been prepared by Technical Committee CEN/TC 261 “Packaging”, the
secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2006, and conflicting national standards shall be withdrawn at the
latest by May 2006.
This draft European Standard is one of a series of thirteen related standards with the following titles:
EN 14847, Aerosol containers — Tinplate containers — Dimensions of the 25,4 mm aperture.
EN 14848, Aerosol containers — Metal containers with 25,4 mm aperture — Dimensions of valve cups.
prEN 15006, Metal aerosol containers — Aluminium containers — Dimensions of the 25,4 mm (one inch)
aperture.
EN 14849, Aerosol containers — Glass containers — Dimensions of aerosol valve ferrules.
prEN 15007, Metal aerosol containers — Tinplate containers — Dimensions of three-piece cans.
prEN 15008, Metal aerosol containers — Dimensions of 1-piece aluminium can with 25,4 mm aperture.
EN 14850, Aerosol containers — Metal containers with 25,4 mm aperture — Measurement of contact height.
EN 14851, Aerosol containers — Aerosol foam flammability test.
EN 14852, Aerosol containers — Determination of the ignition distance of the spray jet.
EN 14853, Aerosol containers — Enclosed space ignition test.
EN 14854, Aerosol containers — Glass containers — Dimensions of the neck finish.
prEN 15009, Aerosol containers — Bicompartmented aerosol containers.
prEN 15010, Aerosol containers — Aluminium containers — Tolerances of the fundamental dimensions in
connection with the clinch.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
and United Kingdom.
3
---------------------- Page: 5 ----------------------
SIST EN 14852:2006
EN 14852:2005 (E)
1 Scope
This European Standard describes a method of determining the maximum distance between the orifice of an
aerosol container and a flame that results in ignition and sustained combustion of an aerosol spray. The
standard applies to aerosol products that have a spray distance of 150 mm or more. It does not apply to
aerosol containers fitted with a metering valve.
NOTE Aerosol products dispensed in the form of a foam, mousse, gel or paste which have a spray distance of less
than 150 mm are specified in EN 14851.
2 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
2.1
ignition source
gas burner providing a blue non-luminous flame 40 mm to 50 mm in height
2.2
sustained combustion
stable flame maintained for 5 s
3 Principle
An aerosol is sprayed towards an ignition source at distances from 150 mm to 900 mm in increments of
150 mm. Any resulting ignition is noted and any sustained combustion which occurs is timed for up to 5 s.
4 Ap
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.