SIST EN 1870-19:2014
(Main)Safety of woodworking machines - Circular sawing machines - Part 19: Circular saw benches (with and without sliding table) and building site saws
Safety of woodworking machines - Circular sawing machines - Part 19: Circular saw benches (with and without sliding table) and building site saws
This European Standard deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to stationary and displaceable circular saw benches (with or without sliding table and/or demountable power feed unit) and building site saws, hereinafter referred to as “machines”, designed to cut solid wood, chipboard, fibreboard, plywood and also these materials, if they are covered with plastic edging and/or plastic/light alloy laminates, when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Machines which are designed to cut wood-based material may also be used for cutting hardened plastic materials with similar physical characteristics as wood. The requirements of this document apply also to machines designed for grooving with a width not exceeding 20 mm in one pass by using a milling tool. This document does not apply to: a) machines set up on a bench or a table similar to a bench, which are intended to carry out work in a stationary position, capable of being lifted by one person by hand. The bench can also be an integrated part of the machine if it consists of hinged legs which can be extended down; b) hand held woodworking machines including any adaptation permitting their use in a different mode, i.e. bench mounting. For the purpose of this document, building site saws having a tiltable spindle are considered to be circular saw benches. This document is not applicable to circular saw benches (with and without sliding table) and building site saws which are manufactured before the date of its publication as EN.
Sicherheit von Holzbearbeitungsmaschinen - Kreissägemaschinen - Teil 19: Tischkreissägemascinen (mit und ohne Schiebetisch) und Baustellenkreissägemaschinen
Diese Europäische Norm behandelt alle im Abschnitt 4 aufgeführten signifikanten Gefährdungen, Gefährdungssituationen und Gefährdungsereignisse, die auf stationäre und verschiebbare Tisch-kreissägemaschinen (mit und ohne Schiebetisch und/oder abnehmbarem Vorschubapparat) und Baustellen-kreissägemaschinen zutreffen - im Folgenden als "Maschinen" bezeichnet -, die konstruiert sind zum Schneiden von Massivholz, Spanplatten, Faserplatten, Sperrholz sowie diesen Werkstoffen, wenn sie mit Kunststoffkanten und/oder mit Laminaten aus Kunststoff/Leichtmetalllegierung beschichtet sind, wenn sie bestimmungsgemäß und entsprechend den durch den Hersteller vorhersehbaren Bedingungen einschließlich vernünftigerweise vorhersehbarem Fehlverhalten verwendet werden.
Maschinen, die für die Bearbeitung von Holzaustauschstoffen konstruiert sind, können auch für die Bearbeitung von Hartkunststoffen mit ähnlichen physikalischen Eigenschaften wie Holz verwendet werden.
ANMERKUNG 1 Hinsichtlich der Definition von einer stationären und einer verschiebbaren Maschine siehe 3.2.9 und 3.2.10.
ANMERKUNG 2 Tischkreissägemaschinen werden zum Längs-, Quer- und Formatschneiden und zum Nuten eingesetzt. Baustellenkreissägemaschinen werden zum Längs-, Quer- und Formatschneiden verwendet.
Die Anforderungen in diesem Dokument gelten auch für Maschinen, die zum Nuten mittels eines Fräswerkzeugs in einem Arbeitsgang und einer Breite, die 20 mm nicht übersteigt, konstruiert sind.
Dieses Dokument gilt nicht für:
a) Maschinen, die auf ein Gestell oder auf einen Tisch, der einem Gestell ähnlich ist, aufgesetzt sind und die vorgesehen sind, während des Betriebs stationär verwendet zu werden und die von Hand von einer Person angehoben werden können. Das Gestell kann auch ein fester Bestandteil der Maschine sein, wenn es aus scharnierbefestigten Füßen besteht, die heruntergeklappt werden können;
b) handgeführte Holzbearbeitungsmaschinen einschließlich irgendwelcher Einrichtungen, die ihre Verwendung in einer anderen Weise, d. h. in einem Gestell montiert, ermöglichen.
ANMERKUNG 3 Transportable, elektrisch angetriebene Maschinen sind durch die Anforderungen in EN 61029-1:2009 zusammen mit EN 61029-2-1:2012 erfasst; handgeführte motorbetriebene Elektrowerkzeuge und Sägetische, die eine Einheit bilden, sind in EN 60745-1:2009 zusammen mit EN 60745-2-5:2010 erfasst.
Im Zusammenhang mit diesem Dokument gelten Baustellenkreissägemaschinen mit einer schrägstellbaren Spindel als Tischkreissägemaschinen.
Dieses Dokument gilt nicht für Tischkreissägemaschinen (mit und ohne Schiebetisch) und Baustellenkreis-sägemaschinen, die vor seiner Veröffentlichung als EN hergestellt wurden.
ANMERKUNG 4 Die von diesem Dokument erfassten Maschinen sind in 1.1 des Anhangs IV der Maschinenrichtlinie aufgeführt.
Sécurité des machines pour le travail du bois - Machines à scies circulaires - Partie 19: Scies circulaires à table de menuisier (avec et sans table mobile) et scies de chanter
Le présent document traite de tous les phénomènes dangereux, situations et événements dangereux significatifs, tels qu’énumérés à l’Article 4, qui sont applicables aux scies circulaires à table de menuisier (avec ou sans table mobile et/ou unité d’avance mécanisée démontable) et aux scies de chantier fixes et transportables, ci-après désignées "machines", conçues pour la coupe de bois massif, de panneaux de particules, de panneaux de fibres, de contreplaqué ainsi que ces matériaux lorsque leurs surfaces ou leurs chants sont recouverts de matière plastique et/ou de plastique/alliages légers stratifiés, lorsqu’elles sont utilisées comme prévu et dans les conditions prévues par le fabricant, incluant une mauvaise utilisation raisonnablement prévisible.
Les machines qui sont conçues pour couper les matériaux à base de bois peuvent également être utilisées pour couper les matières plastiques dures présentant des caractéristiques physiques similaires à celles du bois.
NOTE 1 Pour la définition de machine fixe et de machine transportable, voir 3.2.9 et 3.2.10.
NOTE 2 Les scies circulaires à table de menuisier sont utilisées pour le délignage, pour le tronçonnage, pour la coupe au format et pour le rainurage. Les scies de chantier sont utilisées pour le délignage, pour le tronçonnage et pour la coupe au format.
Les prescriptions du présent document s’appliquent également aux machines conçues pour le rainurage avec une largeur ne dépassant pas 20 mm par passage d’un outil de fraisage.
Le présent document ne s’applique pas aux :
a) machines montées sur un établi ou une table similaire à un établi qui sont conçues pour réaliser un travail à poste fixe qui peuvent être soulevées à la main par une seule personne. L'établi peut également être une pièce intégrée à la machine s'il consiste en pieds articulés qui peuvent être dépliés ;
b) machines à bois portatives y compris toute adaptation permettant leur utilisation de manière différente, c'est-à-dire fixées sur un bâti.
NOTE 3 Les machines-outils à moteur électrique transportables sont couvertes par les prescriptions de l'EN 61029-1:2009 conjointement avec l'EN 61029-2-1:2009, une machine-outil à moteur électrique portative et une scie à table de menuisier destinées à former un ensemble intégré sont couverts par l'EN 60745-1:2009 conjointement avec l'EN 60745-2-5:2010.
Pour les besoins du présent document, les scies de chantier ayant un arbre inclinable sont considérées comme des scies circulaires à table de menuisier.
Le présent document n’est pas applicable aux scies circulaires à table de menuisier (avec et sans table mobile) ni aux scies de chantier qui ont été fabriquées avant sa date de publication comme EN.
NOTE 4 Les machines couvertes par le présent document sont énumérées dans la Directive Machines, Annexe IV, 1.1.
Varnost lesnoobdelovalnih strojev - Krožne žage - 19. del: Krožne žage (z dodajalno mizo ali brez nje) in krožne žage, ki se uporabljajo na gradbišču
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sicherheit von Holzbearbeitungsmaschinen - Kreissägemaschinen - Teil 19: Tischkreissägemascinen (mit und ohne Schiebetisch) und BaustellenkreissägemaschinenSécurité des machines pour le travail du bois - Machines à scies circulaires - Partie 19: Scies circulaires à table de menuisier (avec et sans table mobile) et scies de chanterSafety of woodworking machines - Circular sawing machines - Part 19: Circular saw benches (with and without sliding table) and building site saws91.220Gradbena opremaConstruction equipment79.120.10Lesnoobdelovalni strojiWoodworking machines25.080.60Strojne žageSawing machinesICS:Ta slovenski standard je istoveten z:EN 1870-19:2013SIST EN 1870-19:2014en,fr,de01-marec-2014SIST EN 1870-19:2014SLOVENSKI
STANDARDSIST EN 1870-1:2007+A1:20091DGRPHãþD
SIST EN 1870-19:2014
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1870-19
November 2013 ICS 79.120.10 Supersedes EN 1870-1:2007+A1:2009English Version
Safety of woodworking machines - Circular sawing machines - Part 19: Circular saw benches (with and without sliding table) and building site saws
Sécurité des machines pour le travail du bois - Machines à scies circulaires - Partie 19: Scies circulaires à table de menuisier (avec et sans table mobile) et scies de chantier
Sicherheit von Holzbearbeitungsmaschinen - Kreissägemaschinen - Teil 19: Tischkreissägemaschinen (mit und ohne Schiebetisch) und Baustellenkreissägemaschinen This European Standard was approved by CEN on 7 September 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1870-19:2013 ESIST EN 1870-19:2014
EN 1870-19:2013 (E) 2 Contents Page Foreword .5 Introduction .7 1 Scope .8 2 Normative references .8 3 Terms and definitions . 11 3.1 General . 11 3.2 Definitions . 11 4 List of significant hazards . 17 5 Safety requirements and/or measures . 23 5.1 General . 23 5.2 Controls . 23 5.2.1 Safety and reliability of control systems . 23 5.2.2 Position of controls . 24 5.2.3 Starting . 25 5.2.4 Normal stopping . 26 5.2.5 Emergency stop . 27 5.2.6 Speed control for circular saw benches . 27 5.2.7 Power operated adjustment of the saw blade(s) and/or fence(s) on circular saw benches . 28 5.2.8 Interlocking of guards, movements and functions . 29 5.2.9 Failure of the power supply . 29 5.2.10 Failure of the control circuits . 29 5.3 Protection against mechanical hazards . 30 5.3.1 Stability . 30 5.3.2 Hazard of break up during operation . 30 5.3.3 Tool holder and tool design . 31 5.3.4 Braking . 32 5.3.5 Devices to minimize the possibility or the effect of kickback . 33 5.3.6 Workpiece supports and guides . 40 5.3.7 Prevention of access to moving parts . 44 5.3.8 Powered workpiece clamping . 57 5.3.9 Safety appliances. 57 5.4 Protection against non-mechanical hazards . 61 5.4.1 Fire . 61 5.4.2 Noise . 61 SIST EN 1870-19:2014
EN 1870-19:2013 (E) 3 5.4.3 Emission of chips and dust . 63 5.4.4 Electricity. 64 5.4.5 Ergonomics and handling . 65 5.4.6 Pneumatics . 66 5.4.7 Electromagnetic compatibility . 66 5.4.8 Laser . 66 5.4.9 Static electricity . 66 5.4.10 Errors of fitting . 66 5.4.11 Supply disconnection (Isolation) . 67 5.4.12 Maintenance . 67 6 Information for use . 67 6.1 General . 67 6.2 Marking . 68 6.2.1 Marking of the machine . 68 6.2.2 Marking of riving knives . 69 6.3 Instruction handbook . 69 Annex A (normative)
Stability test . 74 Annex B (normative)
Test for rigidity of building site saws . 75 Annex C (normative)
Saw spindle dimensional tolerances . 76 Annex D (normative)
Riving knife mounting strength test . 77 Annex E (normative)
Riving knife lateral stability test . 78 Annex F (normative)
Minimum dimensions of the machine table, extension table and insert . 79 Annex G (normative)
Saw blade guard stability test . 81 G.1 General . 81 G.2 Separately from riving knife mounted saw blade guards . 81 G.2.1 Saw blade guards with lead-in . 81 G.2.2 Saw blade guards with in-feed rollers . 82 G.3 Riving knife mounted saw blade guards . 83 Annex H (normative)
Impact test method for guards . 85 H.1 General . 85 H.2 Test method . 85 H.2.1 Preliminary remarks . 85 H.2.2 Testing equipment . 85 H.2.3 Projectile for guards . 85 H.2.4 Sampling. 85 H.2.5 Test procedure . 85 H.3 Results . 86 H.4 Assessment . 86 H.5 Test report . 86 H.6 Test equipment for impact test . 86 Annex I (normative)
Braking tests . 88 I.1 Conditions for all tests . 88 I.2 Tests . 88 I.2.1 Un-braked run-down time . 88 I.2.2 Braked run-down time . 88 SIST EN 1870-19:2014
EN 1870-19:2013 (E) 4 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC . 89 Bibliography . 92
SIST EN 1870-19:2014
EN 1870-19:2013 (E) 5 Foreword This document (EN 1870-19:2013) has been prepared by Technical Committee CEN/TC 142 “Woodworkng machines - Safety”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2014, and conflicting national standards shall be withdrawn at the latest by May 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document together with EN 1870-18 supersedes EN 1870-1:2007+A1:2009. The major technical changes from the previous edition are the following: a) the exclusion of saw blade guard mounted on wall, ceiling or floor; b) introduction of PL; c) inclusion of a stability test for displaceable machines; d) more precise requirements for braking function; e) more precise requirement on chips and dust extraction connections; f) extension of usable safety appliances; g) more precise requirements to prevent crushing and shearing hazards. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of the Machinery Directive. For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. EN 1870, Safety of woodworking machines — Circular sawing machines consists of the following parts: Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches Part 4: Multi-blade rip sawing machines with manual loading and/or unloading Part 5: Circular saw benches/up-cutting cross-cut sawing machines Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading SIST EN 1870-19:2014
EN 1870-19:2013 (E) 6 Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines Part 11: Semi-automatic and automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws) Part 12: Pendulum cross-cut sawing machines Part 13: Horizontal beam panel sawing machines Part 14: Vertical panel sawing machines Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading Part 16: Double mitre sawing machines for V-cutting Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (manual radial arm saws) Part 18: Dimension saws Part 19: Circular saw benches (with and without sliding table) and building site saws Organizations contributing to the preparation of this European Standard include European Committee of Woodworking Machinery Manufacturers Association "EUMABOIS". The European Standards produced by CEN/TC 142 are particular to woodworking machines and complement the relevant A and B Standards on the subject of general safety (see Introduction of EN ISO 12100:2010 for a description of A, B and C standards). According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
SIST EN 1870-19:2014
EN 1870-19:2013 (E) 7 Introduction This document has been prepared to be a harmonized standard to provide one means of conforming to the essential safety requirements of the Machinery Directive and associated EFTA regulations. This document is a type "C“ standard as defined in EN ISO 12100:2010. The machinery concerned and the extent to which hazards, hazardous situations and events are covered are indicated in the scope of this document. When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of other standards, for machines that have been designed and built according to the provisions of this type C standard. The requirements of this document are directed to manufacturers and their authorized representatives of circular saw benches (with and without sliding table) and building site saws. They are also useful for designers. This document also includes provisions and examples of information to be provided by the manufacturer to the user. Common requirements for tooling are given in EN 847-1:2013. SIST EN 1870-19:2014
EN 1870-19:2013 (E) 8 1 Scope This European Standard deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to stationary and displaceable circular saw benches (with or without sliding table and/or demountable power feed unit) and building site saws, hereinafter referred to as “machines”, designed to cut solid wood, chipboard, fibreboard, plywood and also these materials, if they are covered with plastic edging and/or plastic/light alloy laminates, when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Machines which are designed to cut wood-based material may also be used for cutting hardened plastic materials with similar physical characteristics as wood. NOTE 1 For the definition of stationary and displaceable machine see 3.2.9 and 3.2.10. NOTE 2 Circular saw benches are used for ripping, cross cutting, dimensioning and grooving. Building site saws are used for ripping, cross cutting and dimensioning. The requirements of this document apply also to machines designed for grooving with a width not exceeding 20 mm in one pass by using a milling tool. This document does not apply to: a) machines set up on a bench or a table similar to a bench, which are intended to carry out work in a stationary position, capable of being lifted by one person by hand. The bench can also be an integrated part of the machine if it consists of hinged legs which can be extended down; b) hand held woodworking machines including any adaptation permitting their use in a different mode, i.e. bench mounting. NOTE 3 Transportable motor-operated electric tools are covered by the requirements of EN 61029-1:2009 together with EN 61029-2-1:2012; a hand-held motor-operated electric tool and a saw bench to form an integrated whole are covered by EN 60745-1:2009 together with EN 60745-2-5: 2010. For the purpose of this document, building site saws having a tiltable spindle are considered to be circular saw benches. This document is not applicable to circular saw benches (with and without sliding table) and building site saws which are manufactured before the date of its publication as EN. NOTE 4 Machines covered by this document are listed under 1.1 of Annex IV of the Machinery Directive. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 614-1:2006+A1:2009, Safety of machinery — Ergonomic design principles — Part 1: Terminology and general principles EN 847-1:2013, Tools for woodworking — Safety requirements — Part 1: Milling tools, circular saw blades EN 894-1:1997+A1:2008, Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 1: General principles for human interactions with displays and control actuators EN 894-2:1997+A1:2008, Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 2: Displays SIST EN 1870-19:2014
EN 1870-19:2013 (E) 9 EN 894-3:2000+A1:2008, Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 3: Control actuators EN 1005-1:2001+A1:2008, Safety of machinery — Human physical performance — Part 1: Terms and definitions EN 1005-2:2003+A1:2008, Safety of machinery — Human physical performance — Part 2: Manual handling of machinery and component parts of machinery EN 1005-3:2002+A1:2008, Safety of machinery — Human physical performance — Part 3: Recommended force limits for machinery operation EN 1005-4:2005+A1:2008, Safety of machinery — Human physical performance — Part 4: Evaluation of working postures and movements in relation to machinery EN 1037:1995+A1:2008, Safety of machinery — Prevention of unexpected start-up EN 1088:1995+A2:2008, Safety of machinery — Interlocking devices associated with guards — Principles for design and selection EN 50370-1:2005, Electromagnetic compatibility (EMC) — Product family standard for machine tools — Part 1: Emission EN 50370-2:2003, Electromagnetic compatibility (EMC) — Product family standard for machine tools — Part 2: Immunity EN 50525-2-21:2011, Electric cables — Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) — Part 2-21: Cables for general applications — Flexible cables with crosslinked elastomeric insulation EN 60204-1:2006, Safety of machinery — Electrical equipment of machines — Part 1: General requirements (IEC 60204-1:2005, modified) EN 60439-1:19991), Low voltage switchgear and controlgear assemblies — Part 1: Type-tested and partially type-tested assemblies (IEC 60439-1:1999) EN 60529:19912), Degrees of protection provided by enclosures (IP Code) (IEC 60529:1989) EN 60825-1:2007, Safety of laser products — Part 1: Equipment classification, requirements and user’s guide (IEC 60825-1:2007) EN 61310-1:2008, Safety of machinery — Indication, marking and actuation — Part 1: Requirements for visual, acoustic and tactile signals (IEC 61310-1:2007) EN 61800-5-2:2007, Adjustable speed electrical power drive systems – Part 5-2: Safety requirements – Functional (IEC 61800-5-2:2007) EN ISO 3743-1:2010, Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering methods for small movable sources in reverberant fields — Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010) EN ISO 3743-2:2009, Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering methods for small, moveable sources in reverberant fields — Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994)
1) EN 60439-1:1999 is impacted by EN 60439-1:1999/A1:2004. 2) EN 60529:1991 is impacted by EN 60529:1991/A1:2000. SIST EN 1870-19:2014
EN 1870-19:2013 (E) 10 EN ISO 3744:2010, Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) EN ISO 3745:2012, Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms (ISO 3745:2012) EN ISO 3746:2010, Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010) EN ISO 4413:2010, Hydraulic fluid power — General rules and safety requirements for systems and their components (ISO 4413:2010) EN ISO 4414:2010, Pneumatic fluid power — General rules and safety requirements for systems and their components (ISO 4414:2010) EN ISO 4871:2009, Acoustics — Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) EN ISO 9614-1:2009, Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points (ISO 9614-1:1993) EN ISO 11202:2010, Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) EN ISO 11204:2010, Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010) EN ISO 11688-1:2009, Acoustics — Recommended practice for the design of low-noise machinery and equipment — Part 1: Planning (ISO/TR 11688-1:1995) EN ISO 12100:2010, Safety of machinery — General principles for design — Risk assessment and risk reduction (ISO 12100:2010) EN ISO 13849-1:2008, Safety of machinery — Safety-related parts of controls systems — Part 1: General principles for design (ISO 13849-1:2006) EN ISO 13850:2008, Safety of machinery — Emergency stop — Principles for design (ISO 13850:2006) EN ISO 13857:2008, Safety of machinery — Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) ISO 7960:1995, Airborne noise emitted by machine tools — Operating conditions for woodworking machines SIST EN 1870-19:2014
EN 1870-19:2013 (E) 11 3 Terms and definitions 3.1 General For the purposes of this document, the terms and definitions given in EN ISO 12100:2010 and the following apply. 3.2 Definitions 3.2.1 circular saw bench hand fed machine fitted with a single main circular saw blade which is fixed in position during the cutting operation, and a horizontal table fixed during operation (see Figure 1) Note 1 to entry: The saw blade is mounted on a horizontal spindle below the table. The machine may have any of the following features: facility for the saw blade to be raised and lowered through the table; facility to tilt the saw blade for angled cutting; additional, manually operated sliding table; facility for scoring; facility for grooving with milling tool; demountable power feed unit. SIST EN 1870-19:2014
EN 1870-19:2013 (E) 12
a)
b) Key
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.