SIST EN 13523-29:2011
(Main)Coil coated metals - Test methods - Part 29: Resistance to environmental soiling (Dirt pick-up and striping)
Coil coated metals - Test methods - Part 29: Resistance to environmental soiling (Dirt pick-up and striping)
This part of EN 13523 specifies a procedure for the comparative evaluation of resistance to soiling of an organic coating on a metallic substrate (coil coating) in an outdoor exposure environment, particularly the soiling defect known as "Tiger stripes".
Bandbeschichtete Metalle - Prüfverfahren - Teil 29: Beständigkeit gegen Verschmutzung (Schmutzaufnahme und Streifenbildung)
Dieser Teil von EN 13523 legt ein Verfahren zum vergleichenden Bewerten der Beständigkeit einer
organischen Beschichtung auf einem metallischen Substrat (Bandbeschichtung) gegen Schmutzaufnahme in
einer Umgebung im Außenbereich fest, insbesondere der Verschmutzung, die als „Tigerstreifen“ bekannt ist.
Tôles prélaquées - Méthodes d'essai - Partie 29 : Résistance à la pollution environnementale (salissures)
La présente partie de l’EN 13523 prescrit une méthode d’évaluation comparative de la résistance à la
pollution d’un revêtement organique appliqué sur un substrat métallique (prélaquage) dans un environnement
d’exposition à l’extérieur, en particulier de la résistance au défaut appelé « zébrures ».
Kovine, prevlečene v svitkih - Metode preskušanja - 29. del: Odpornost proti onesnaženju iz okolja (zbiranje nesnage in priprava vzorcev)
Ta del EN 13523 določa postopek za primerjalno vrednotenje odpornosti proti onesnaženju organske prevleke na kovinskem substratu (prevleke v svitkih) pri izpostavljenosti zunanjemu okolju, predvsem onesnaženju, znanemu kot »tigrove proge«.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bandbeschichtete Metalle - Prüfverfahren - Teil 29: Beständigkeit gegen Verschmutzung (Schmutzaufnahme und Streifenbildung)Tôles prélaquées - Méthodes d'essai - Partie 29 : Résistance à la pollution environnementale (salissures)Coil coated metals - Test methods - Part 29: Resistance to environmental soiling (Dirt pick-up and striping)25.220.60Organske prevlekeOrganic coatings13.020.40Onesnaževanje, nadzor nad onesnaževanjem in ohranjanjePollution, pollution control and conservationICS:Ta slovenski standard je istoveten z:EN 13523-29:2010SIST EN 13523-29:2011en,fr,de01-november-2011SIST EN 13523-29:2011SLOVENSKI
STANDARD
SIST EN 13523-29:2011
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13523-29
March 2010 ICS 25.220.60 English Version
Coil coated metals - Test methods - Part 29: Resistance to environmental soiling (Dirt pick-up and striping)
Tôles prélaquées - Méthodes d'essai - Partie 29 : Résistance à la pollution environnementale (salissures)
Bandbeschichtete Metalle - Prüfverfahren - Teil 29: Beständigkeit gegen Verschmutzung (Schmutzaufnahme und Streifenbildung) This European Standard was approved by CEN on 20 February 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13523-29:2010: ESIST EN 13523-29:2011
EN 13523-29:2010 (E) 2 Contents Page Foreword .31Scope .52Normative references .53Terms and definitions .54Principle .55Apparatus and materials .56Sample preparation .77Procedure .78Evaluation .79Test report .9Bibliography . 10 SIST EN 13523-29:2011
EN 13523-29:2010 (E) 3 Foreword This document (EN 13523-29:2010) has been prepared by Technical Committee CEN/TC 139 “Paints and varnishes”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2010, and conflicting national standards shall be withdrawn at the latest by September 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. EN 13523, Coil coated metals — Test methods, consists of the following parts: Part 0: General introduction and list of test methods Part 1: Film thickness Part 2: Specular gloss Part 3: Colour difference — Instrumental comparison Part 4: Pencil hardness Part 5: Resistance to rapid deformation (impact test) Part 6: Adhesion after indentation (cupping test) Part 7: Resistance to cracking on bending (T-bend test) Part 8: Resistance to salt spray (fog) Part 9: Resistance to water immersion Part 10: Resistance to fluorescent UV radiation and water condensation Part 11: Resistance to solvents (rubbing test) Part 12: Resistance to scratching Part 13: Resistance to accelerated ageing by the use of heat Part 14: Chalking (Helmen method) Part 15: Metamerism Part 16: Resistance to abrasion Part 17: Adhesion of strippable films Part 18: Resistance to staining SIST EN 13523-29:2011
EN 13523-29:2010 (E) 4 Part 19: Panel design and method of atmospheric exposure testing Part 20: Foam adhesion Part 21: Evaluation of outdoor exposed panels Part 22: Colour difference — Visual comparison Part 23: Colour stability in humid atmospheres containing sulfur dioxide Part 24: Resistance to blocking and pressure marking Part 25: Resistance to humidity Part 26: Resistance to condensation of water Part 27: Resistance to humid poultice (Cataplasm test) Part 29: Resistance to environmental soiling (Dirt pick-up and striping) According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.