SIST EN 14214:2012/kprA1:2013
(Amendment)Liquid petroleum products - Fatty acid methyl esters (FAME) for use in diesel engines and heating applications - Requirements and test methods
Liquid petroleum products - Fatty acid methyl esters (FAME) for use in diesel engines and heating applications - Requirements and test methods
1. improvement of the Annex that presents the FAME precision data. A re-evaluation of Table A.1 has been executed and it was agreed to complete it by presenting reproducibility information for all test methods that is of interest to people handling the fuel; 2. better description of distilled FAME product; 3. updating of the note in the Foreword about the co-existence with EN 590 as the standard as such is also used for the B30 specification 4. provision regarding the use of legally required dyes or markers such as common in heating fuels Plus if feasible an update of the CFPP test methodology
Kraftstoffe für Kraftfahrzeuge - Fettsäure-Methylester (FAME) für Dieselmotoren - Anforderungen und Prüfverfahren
Carburants pour automobiles - Esters méthyliques d'acides gras (EMAG) pour moteurs diesel - Exigences et méthodes d'essais
Goriva za motorna vozila - Metilni estri maščobnih kislin (FAME) za dizelske motorje - Zahteve in preskusne metode
Ta evropski standard določa zahteve in preskusne metode za metilne estre maščobnih kislin (v nadaljevanju: »FAME«) pri prodaji in dobavi, ki se bodo uporabili kot gorivo za dizelske motorje in grelne naprave v 100 % koncentraciji ali kot polnilo za destilatno gorivo za dizelske motorje v skladu z zahtevami iz standarda EN 590 in za kurilno olje. V 100-odstotni koncentraciji se uporablja v gorivih za dizelske motorje in grelne naprave, ki so načrtovane ali naknadno prilagojene za uporabo 100-odstotnih FAME.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 14214:2012/kprA1:2013
01-junij-2013
*RULYD]DPRWRUQDYR]LOD0HWLOQLHVWULPDãþREQLKNLVOLQ )$0( ]DGL]HOVNH
PRWRUMH=DKWHYHLQSUHVNXVQHPHWRGH
Liquid petroleum products - Fatty acid methyl esters (FAME) for use in diesel engines
and heating applications - Requirements and test methods
Kraftstoffe für Kraftfahrzeuge - Fettsäure-Methylester (FAME) für Dieselmotoren -
Anforderungen und Prüfverfahren
Carburants pour automobiles - Esters méthyliques d'acides gras (EMAG) pour moteurs
diesel - Exigences et méthodes d'essais
Ta slovenski standard je istoveten z: EN 14214:2012/FprA1
ICS:
75.160.20 7HNRþDJRULYD Liquid fuels
SIST EN 14214:2012/kprA1:2013 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 14214:2012/kprA1:2013
---------------------- Page: 2 ----------------------
SIST EN 14214:2012/kprA1:2013
EUROPEAN STANDARD
FINAL DRAFT
EN 14214:2012
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
May 2013
ICS 75.160.20
English Version
Liquid petroleum products - Fatty acid methyl esters (FAME) for
use in diesel engines and heating applications - Requirements
and test methods
Produits pétroliers liquides - Esters méthyliques d'acides Flüssige Mineralölerzeugnisse - Fettsäure-Methylester
gras (EMAG) pour moteurs diesel et comme combustible (FAME) zur Verwendung in Dieselmotoren und als Heizöl -
de chauffage - Exigences et méthodes d'essai Anforderungen und Prüfverfahren
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 19.
This draft amendment A1, if approved, will modify the European Standard EN 14214:2012. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14214:2012/FprA1:2013: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 14214:2012/kprA1:2013
EN 14214:2012/FprA1:2013 (E)
Contents Page
1 Modifications to the Foreword .4
2 Modifications to Clause 2 .4
3 Modification to 5.1 .4
4 Modifications to Table 1 under 5.3 .4
5 Modifications to Table 2 under 5.4.2 .5
6 Modification to 5.4.3.2 .5
7 Modification to Table 3a under 5.4.3.3 .5
8 Modifications to 5.5.1 .5
9 Modifications to 5.5.2 .5
10 Modification to Annex A .5
2
---------------------- Page: 4 ----------------------
SIST EN 14214:2012/kprA1:2013
EN 14214:2012/FprA1:2013 (E)
Foreword
This document (EN 14214:2012/FprA1:2013) has been prepared by Technical Committee CEN/TC 19
“Gaseous and liquid fuels, lubricants and related products of petroleum, synthetic and biological origin”, the
secretariat of which is held by NEN.
This document is currently submitted to the Unique Acceptance Procedure.
3
---------------------- Page: 5 ----------------------
SIST EN 14214:2012/kprA1:2013
EN 14214:2012/FprA1:2013 (E)
1 Modifications to the Foreword
th
Delete the 6 paragraph: "This document exists in parallel with EN 590.".
Introduce after the first listed item under the technical changes: "further clarification regarding the use of dyes and
markers due to its new heating fuel application;".
Introduce after the second listed item under the technical changes: "removal of identification of parallel existence
with EN 590 as FAME is being used for more than one blending purpose;".
Rephrase the eighth listed item under the technical changes starting after 'phosphorus content': "CFPP and sulfur
content, EN 16300, EN 16294, EN 16329 and EN ISO 13032, respectively.".
Introduce in the ninth listed item under the technical changes between 'polyunsaturated fatty acids' and 'stability
characteristics of FAME': "oxidation stability, total contamination," and introduce a second sentence: "The test
method procedure for total contamination (prEN 12662) has been technically updated to specifically allow
improved applicability to FAME (see CEN/TC 19/N 1512R, report I);".
Replace the last listed item under the t
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.