Technical drawings - Construction drawings - Drawings for the assembly of prefabricated structures (ISO 4172:1991)

This second edition cancels and replaces the first edition (ISO 4172 :1981), clause 2 and subclause 4.3 of which have been technically revised. Specifies general rules for the preparation of working drawings intended for the field assembly of prefabricated structures for building and civil engineering works. Gives normative references, definitions, documentation, designation of prefabricated structural components.

Technische Zeichnungen - Zeichnungen für das Bauwesen - Zeichnungen für den Zusammenbau vorgefertigter Teile (ISO 4172:1991)

Diese Internationale Norm legt allgemeine Regeln für die Erstellung von Zeichnungen für den Zusammenbau vorgefertigter Teile im Bauwesen fest.

Dessins techniques - Dessins de construction - Dessins d'assemblage des structures préfabriquées (ISO 4172:1991)

Tehnične risbe - Gradbeniške risbe - Sestavne risbe montažnih konstrukcij (ISO 4172:1991)

General Information

Status
Withdrawn
Publication Date
30-Apr-1998
Withdrawal Date
16-Apr-2024
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
15-Apr-2024
Due Date
08-May-2024
Completion Date
17-Apr-2024

Relations

Buy Standard

Standard
EN ISO 4172 1998
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 4172:1998
01-maj-1998
7HKQLþQHULVEH*UDGEHQLãNHULVEH6HVWDYQHULVEHPRQWDåQLKNRQVWUXNFLM ,62

Technical drawings - Construction drawings - Drawings for the assembly of prefabricated
structures (ISO 4172:1991)
Technische Zeichnungen - Zeichnungen für das Bauwesen - Zeichnungen für den
Zusammenbau vorgefertigter Teile (ISO 4172:1991)
Dessins techniques - Dessins de construction - Dessins d'assemblage des structures
préfabriquées (ISO 4172:1991)
Ta slovenski standard je istoveten z: EN ISO 4172:1996
ICS:
01.100.30 *UDGEHQLQDþUWL Construction drawings
SIST EN ISO 4172:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 4172:1998

---------------------- Page: 2 ----------------------

SIST EN ISO 4172:1998

---------------------- Page: 3 ----------------------

SIST EN ISO 4172:1998

---------------------- Page: 4 ----------------------

SIST EN ISO 4172:1998

---------------------- Page: 5 ----------------------

SIST EN ISO 4172:1998

---------------------- Page: 6 ----------------------

SIST EN ISO 4172:1998
INTERNATIONAL
STANDARD 4172
Second edition
1991-03-01
Technical drawings
- Construction drawings -
Drawings for the assembly of prefabricated
structures
Dessins techniques - Dessins de construction - Dessins d’assemblage
des structures pr6fa briquees
Reference number
ISO 4172:1991(E)

---------------------- Page: 7 ----------------------

SIST EN ISO 4172:1998
ISO 4172:1991(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the
work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an Inter-
national Standard requires approval by at least 75 % of the member
bodies casting a vote.
International Standard ISO 4172 was prepared by Technical Committee
ISO/TC 10, Technical drawings, product detinition and related documen-
tation.
This second edition cancels and replaces the first edition (ISO
4172:1981), clause 2 and subclause 4.3 of which have been technically
revised.
0 ISO 1991
All rights reserved. No part of this publication may be reproduced or utilized in any form
or by any means, electronie or mechanical, lncluding photocopying and microfilm, without
Permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-1211 Geneve 20 l Switzerland
Printed in Switzerland
ii

---------------------- Page: 8 ----------------------

SIST EN ISO 4172:1998
---
ISO 4172:1991 (E)
INTERNATIONAL STANDARD
- Construction drawings - Drawings for
Technical drawings
the assembly of prefabricated structures
ISO 54551979, Technical drawings - Scales.
1 Scope
ISO 5457:1980, Technical drawings - Sizes and lay-
This International Standard specifres general rules
out of drawing sheets.
for the preparation of working drawings intended for
the field assembly of prefabricated structures for
ISO 6284:1985, Tolerantes for building - Indication
building and civil engineering works.
of tolerantes on building and construction
drawings.
ISO 7200:1984, Technical drawings - Title blocks.
2 Normative references
ISO 7437: 1990, Technical drawings - Construction
The following Standards contain provisions which,
dra wings - General rules for execution of production
through reference in this text, constitute provisions
drawings for prefabricated structural components.
of this International Standard. At the time of publi-
cation, the editions indicated were valid. All stan-
ISO 8048:1984, Technical drawings - Construction
dards are subject to revision, and Parties to
drawings - Representation of views, sections and
agreements based on this International Standard
Cuts.
are encouraged to investigate the possibility of ap-
plying the most recent editions of the Standards in-
dicated below. Members of IEC and ISO maintain
3 Definitions
registers of currently valid International Standards.
For the purposes of this International Standard, the
ISO 128:1982, Technical drawings - General princi-
following definitions apply.
ples of presentation.
3.1 prefabricated structure: Structure erected out
ISO 129:1985, Technical drawings - Dimensioning -
of prefabricated structu
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.