kSIST-TS ISO/IEC DTS 17035:2024

Conformity assessment - Guidelines for validation and verification programmes

1.1 This document provides guidance to validation and verification programme owners and validation and verification bodies on the development, content and operation of validation and verification programmes.
1.2 This document is intended to be used in conjunction with ISO/IEC 17029 and any sector application of ISO/IEC 17029 as well as in conjunction with other conformity assessment programmes, e.g. as part of the evaluation activities in a scheme for the certification of products according to ISO/IEC 17065.

Évaluation de la conformité — Lignes directrices pour les programmes de validation et de vérification

Ugotavljanje skladnosti - Smernice za programe validacije in verifikacije

General Information

• Status: Not Published
• Public Enquiry End Date: 18-Jul-2024
• ICS: 03.120.20 - Product and company certification. Conformity assessment
• Technical Committee: UGA - Conformity assessment
• Current Stage: 5520 - Unique Acceptance Procedure (UAP) (Adopted Project)
• Start Date: 14-May-2024
• Due Date: 01-Oct-2024
• Ref Project: ISO/IEC DTS 17035 - Conformity assessment — Guidelines for validation and verification programmes

Standards Content (Sample)

SLOVENSKI STANDARD
kSIST-TS ISO/IEC DTS 17035:2024
01-julij-2024
Ugotavljanje skladnosti - Smernice za programe validacije in verifikacije
Conformity assessment - Guidelines for validation and verification programmes
Ta slovenski standard je istoveten z: ISO/IEC DTS 17035
ICS:
03.120.20 Certificiranje proizvodov in Product and company
podjetij. Ugotavljanje certification. Conformity
skladnosti assessment
kSIST-TS ISO/IEC DTS 17035:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
kSIST-TS ISO/IEC DTS 17035:2024

---------------------- Page: 2 ----------------------
kSIST-TS ISO/IEC DTS 17035:2024
FINAL DRAFT
Technical
Specification
ISO/IEC DTS 17035
ISO/CASCO
Conformity assessment —
Secretariat: ISO
Guidelines for validation and
Voting begins on:
verification programmes
2024-05-14
Voting terminates on:
2024-07-09
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
Reference number
ISO/IEC DTS 17035:2024(en) © ISO/IEC 2024

---------------------- Page: 3 ----------------------
kSIST-TS ISO/IEC DTS 17035:2024
FINAL DRAFT
ISO/IEC DTS 17035:2024(en)
Technical
Specification
ISO/IEC DTS 17035
ISO/CASCO
Conformity assessment —
Secretariat: ISO
Guidelines for validation and
Voting begins on:
verification programmes
Voting terminates on:
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
COPYRIGHT PROTECTED DOCUMENT
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
© ISO/IEC 2024
IN ADDITION TO THEIR EVALUATION AS
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
or ISO’s member body in the country of the requester.
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland Reference number
ISO/IEC DTS 17035:2024(en) © ISO/IEC 2024

© ISO/IEC 2024 – All rights reserved
ii

---------------------- Page: 4 ----------------------
kSIST-TS ISO/IEC DTS 17035:2024
ISO/IEC DTS 17035:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Validation/Verification programmes . 4
4.1 General .4
4.2 Programme content .
...

FINAL DRAFT
Technical
Specification
ISO/IEC DTS 17035
ISO/CASCO
Conformity assessment —
Secretariat: ISO
Guidelines for validation and
Voting begins on:
verification programmes
2024-05-14
Voting terminates on:
2024-07-09
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
Reference number
ISO/IEC DTS 17035:2024(en) © ISO/IEC 2024

---------------------- Page: 1 ----------------------
FINAL DRAFT
ISO/IEC DTS 17035:2024(en)
Technical
Specification
ISO/IEC DTS 17035
ISO/CASCO
Conformity assessment —
Secretariat: ISO
Guidelines for validation and
Voting begins on:
verification programmes
Voting terminates on:
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
COPYRIGHT PROTECTED DOCUMENT
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
© ISO/IEC 2024
IN ADDITION TO THEIR EVALUATION AS
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
or ISO’s member body in the country of the requester.
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland Reference number
ISO/IEC DTS 17035:2024(en) © ISO/IEC 2024

© ISO/IEC 2024 – All rights reserved
ii

---------------------- Page: 2 ----------------------
ISO/IEC DTS 17035:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Validation/Verification programmes . 4
4.1 General .4
4.2 Programme content .5
4.2.1 Scope of validation/verification .5
4.2.2 Competence, impartiality and operation of validation/verification bodies .5
4.2.3 Steps for the validation/verification process .6
4.2.4 Evidence gathering activities .6
4.2.5 Reporting .
...

ISO/IEC DTS 17035:2024(en)
Deleted: TS
Deleted: 20xx(E
ISO CASCO
Deleted: WG66/
Secretariat: ISO
Date: 2024-04-28
Deleted: .01.29
Conformity assessment — Guidelines for validation and verification programmes
Deleted: –
Deleted: /
Deleted: (schemes)
Deleted: ¶
DTS stage¶
¶
Warning for WDs and CDs¶
This document is not an ISO International Standard. It is
distributed for review and comment. It is subject to
change without notice and may not be referred to as an
International Standard.¶
Recipients of this draft are invited to submit, with their
comments, notification of any relevant patent rights of
which they are aware and to provide supporting
documentation.¶
¶
¶
¶

---------------------- Page: 1 ----------------------
Deleted: ISO/IEC DTS 17035
© ISO/IEC 2024
Deleted: 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no
part of this publication may be reproduced or utilized otherwise in any form or by any means,
electronic or mechanical, including photocopying, or posting on the internet or an intranet, without
prior written permission. Permission can be requested from either ISO at the address below or
ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org Deleted: www.iso.org
Published in Switzerland
Deleted: ii © ISO 2024 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC DTS 17035:2024(en)
Deleted:
Contents
Foreword . iv
Deleted: Foreword iv¶
Introduction v¶
Introduction . v
1 Scope 1¶
2 Normative references 1¶
1 Scope . 1
3 Terms and definitions 1¶
4 Validation/Verification programmes 4¶
2 Normative references . 1
4.1 General 4¶
3 Terms and definitions . 1
4.2 Programme content 5¶
4.2.1 Scope of validation/verification 5¶
4 Validation/Verification programmes. 4
4.2.2 Competence, impartiality and operation of
4.1 General . 4
validation/verification bodies 5¶
4.2 Programme content . 5
4.2.3 Steps for the validation/verification
process 5¶
4.2.1 Scope of validation/verification . 5
4.2.4 Evidence gathering activities 6¶
4.2.2 Competence, impartiality and operation of validation/verification bodies . 5
4.2.5 Reporting 6¶
4.2.3 Steps for the validation/verification process . 6
4.3 Programme development 7¶
4.2.4 Evidence gathering activities . 7
4.4 Programme maintenance, review and
4.2.5 Reporting . 7
improvement 7¶
5 Programme owner 8¶
4.3 Programme development . 7
Annex A Clarification of logo/symbol/mark
4.4 Programme maintenance, review and improvement . 8
(informative) 9¶
5 Programme owner . 9 A.1 general 9¶
A.2 Rules for issuing and using marks (see
Annex A (informative) Clarification of logo/symbol/mark . 10
ISO/IEC 17029:2019, 10.3.1) 9¶
Annex B Recognition of validation/verification
A.1 General . 10
programmes (schemes)
...