SIST EN IEC 60335-2-95:2023
(Main)Household and similar electrical appliances - Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use (IEC 60335-2-95:2019)
Household and similar electrical appliances - Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use (IEC 60335-2-95:2019)
This clause of Part 1 is replaced by the following.
This part of IEC 60335 deals with the safety of electric drives for garage doors for residential
use that open and close in a vertical direction, the rated voltage of the drives being not more
than 250 V for single-phase appliances and 480 V for other appliances. It also covers the
hazards associated with the movement of these electrically driven garage doors.
NOTE 101 Examples of garage doors are shown in Figure 101.
NOTE 102 The drive can be supplied with a garage door.
NOTE 103 This standard also applies to entrapment protection devices for use with drives. It does not cover
hazards related to the mechanisms of the door itself.
As far as is practicable, this standard deals with the common hazards presented by
appliances that are encountered by all persons in and around the home. However, in general,
it does not take into account playing with the appliance by young children, but recognizes that
children may be in the vicinity of the garage door.
NOTE 104 Attention is drawn to the fact that in many countries additional requirements are specified by the
national authorities responsible for the protection of labour and similar authorities.
NOTE 105 This standard does not apply to drives
– for shutters, awnings, blinds and similar equipment (IEC 60335-2-97);
– for gates, doors and windows (IEC 60335-2-103);
– for commercial and industrial purposes;
– intended to be used in locations where special conditions prevail, such as the presence of a corrosive or
explosive atmosphere (dust, vapour or gas).
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-95: Besondere Anforderungen für Antriebe von Garagentoren mit Senkrechtbewegung zur Verwendung im Wohnbereich (IEC 60335-2-95:2019)
Appareils électrodomestiques et analogues - Sécurité - Partie 2-95: Exigences particulières pour les motorisations de portes de garage à ouverture verticale, pour usage résidentiel (IEC 60335-2-95:2019)
IEC 60335-2-95:2019 est disponible sous forme de IEC 60335-2-95:2019 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.
L'IEC 60335-2-95:2019 traite de la sécurité des motorisations électriques des portes de garage pour usage résidentiel, qui ouvrent et ferment la porte verticalement et dont la tension assignée n'est pas supérieure à 250 V pour les appareils monophasés et à 480 V pour les autres appareils. Elle couvre également les dangers liés au mouvement de ces portes de garage motorisées. La motorisation peut être livrée avec une porte de garage. La présente norme s'applique également aux dispositifs de protection contre l'écrasement à utiliser avec les motorisations. Elle ne couvre pas les dangers liés au mécanisme de la porte elle-même. Dans la mesure du possible, la présente norme traite des dangers ordinaires présentés par les appareils et encourus par tous les individus à l'intérieur et autour de l'habitation. Cependant, elle ne tient généralement pas compte de l’utilisation de l'appareil comme jouet par des jeunes enfants mais reconnaît que des enfants peuvent se trouver à proximité de la porte de garage. L'attention est attirée sur le fait que, dans de nombreux pays, des exigences supplémentaires sont spécifiées par les organismes nationaux responsables de la protection des travailleurs et par des organismes similaires. La présente norme ne s’applique pas aux motorisations
- de volets, stores, rideaux et équipements analogues (IEC 60335-2-97);
- motorisations de portails, portes et fenêtres (IEC 60335-2-103);
- pour usages commerciaux et industriels;
- destinées à être utilisées dans des locaux présentant des conditions particulières, telles que la présence d'une atmosphère corrosive ou explosive (poussière, vapeur ou gaz).
Cette quatrième édition annule et remplace la troisième édition parue en 2011, l'Amendement 1:2015 et l'Amendement 2:2017. Cette édition constitue une révision technique.
Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) le texte a été aligné sur l’édition 5.2 de la Partie 1;
b) les titres des références IEC 60335-2-97 et IEC 60335-2-103 ont été revus et corrigés (Article 1);
c) des instructions spécifiques ont été revues afin de les séparer des informations à fournir (7.12);
d) les critères de conformité pour les essais de 19.11.2 et 19.11.3 ont été modifiés (19.13);
e) les essais relatifs aux appareils de la
Gospodinjski in podobni električni aparati - Varnost - 2-95. del: Posebne zahteve za pogonske sklope dvižnih garažnih vrat za stanovanjsko rabo (IEC 60335-2-95:2019)
To točko 1. dela nadomešča naslednje besedilo.
Ta del standarda IEC 60335 obravnava varnost električnih pogonskih sklopov garažnih vrat za stanovanjsko rabo, ki se odpirajo in zapirajo v navpični smeri, katerih nazivna napetost ne presega 250 V za enofazne aparate in 480 V za druge aparate. Obravnava tudi tveganja, povezana s premikanjem teh električno gnanih garažnih vrat.
OPOMBA 101: Primeri garažnih vrat so prikazani na sliki 101.
OPOMBA 102: Pogonski sklop je lahko dobavljen z garažnimi vrati.
OPOMBA 103: Ta standard se uporablja tudi za naprave za zaščito pred ukleščenjem pri uporabi pogonskih sklopov. Standard ne zajema nevarnosti, povezanih z mehanizmi samih vrat.
Ta standard v največji možni meri obravnava splošne nevarnosti, ki jih predstavljajo aparati ter s katerimi se srečujejo osebe doma in v okolici doma. Na splošno ne vključuje primerov majhnih otrok, ki se igrajo z aparatom, vendar priznava, da so lahko otroci v bližini garažnih vrat.
OPOMBA 104: Opozoriti je treba, da v številnih državah nacionalni organi, odgovorni za varstvo pri delu, in podobni organi določajo dodatne zahteve.
OPOMBA 105: Ta standard se ne uporablja za pogonske sklope
– rolojev, ponjav, senčnikov in podobne opreme (IEC 60335-2-97);
– vrat in oken (IEC 60335-2-103);
− za komercialne in industrijske namene;
– namenjene za uporabo na lokacijah, kjer veljajo posebne razmere, kot je prisotnost korozivne ali eksplozivne atmosfere (prah, hlapi ali plin).
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 60335-2-95:2023
01-julij-2023
Gospodinjski in podobni električni aparati - Varnost - 2-95. del: Posebne zahteve
za pogonske sklope dvižnih garažnih vrat za stanovanjsko rabo (IEC 60335-2-
95:2019)
Household and similar electrical appliances - Safety - Part 2-95: Particular requirements
for drives for vertically moving garage doors for residential use (IEC 60335-2-95:2019)
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-95:
Besondere Anforderungen für Antriebe von Garagentoren mit Senkrechtbewegung zur
Verwendung im Wohnbereich (IEC 60335-2-95:2019)
Appareils électrodomestiques et analogues - Sécurité - Partie 2-95: Exigences
particulières pour les motorisations de portes de garage à ouverture verticale, pour
usage résidentiel (IEC 60335-2-95:2019)
Ta slovenski standard je istoveten z: EN IEC 60335-2-95:2023
ICS:
13.120 Varnost na domu Domestic safety
29.120.01 Električna dodatna oprema Electrical accessories in
na splošno general
91.090 Konstrukcije zunaj stavb External structures
SIST EN IEC 60335-2-95:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 60335-2-95:2023
---------------------- Page: 2 ----------------------
SIST EN IEC 60335-2-95:2023
EUROPEAN STANDARD EN IEC 60335-2-95
NORME EUROPÉENNE
EUROPÄISCHE NORM May 2023
ICS 13.120; 29.120.01; 91.090 Supersedes EN 60335-2-95:2015; EN 60335-2-
95:2015/A1:2015; EN 60335-2-95:2015/A2:2019
English Version
Household and similar electrical appliances - Safety - Part 2-95:
Particular requirements for drives for vertically moving garage
doors for residential use
(IEC 60335-2-95:2019)
Appareils électrodomestiques et analogues - Sécurité - Sicherheit elektrischer Geräte für den Hausgebrauch und
Partie 2-95: Exigences particulières pour les motorisations ähnliche Zwecke - Teil 2-95: Besondere Anforderungen für
de portes de garage à ouverture verticale, pour usage Antriebe von Garagentoren mit Senkrechtbewegung zur
résidentiel Verwendung im Wohnbereich
(IEC 60335-2-95:2019) (IEC 60335-2-95:2019)
This European Standard was approved by CENELEC on 2023-03-01. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60335-2-95:2023 E
---------------------- Page: 3 ----------------------
SIST EN IEC 60335-2-95:2023
EN IEC 60335-2-95:2023 (E)
European foreword
This document (EN IEC 60335-2-95:2023) consists of the text of document IEC 60335-2-95:2019,
prepared by IEC/TC 61 "Safety of household and similar electrical appliances"
The following dates are fixed:
• latest date by which this document has to be (dop) 2023-11-12
implemented at national level by publication of an
identical national standard or by endorsement
• latest date by which the national standards (dow) 2026-05-12
conflicting with this document have to be withdrawn
This document supersedes EN 60335-2-95:2015 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document is read in conjunction with EN IEC 60335-2-95:2023/A11:2023.
This document has been prepared under a Standardization Request given to CENELEC by the
European Commission and the European Free Trade Association.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60335-2-95:2019 was approved by CENELEC as a European
Standard without any modification.
2
---------------------- Page: 4 ----------------------
SIST EN IEC 60335-2-95:2023
IEC 60335-2-95
®
Edition 4.0 2019-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Household and similar electrical appliances – Safety –
Part 2-95: Particular requirements for drives for vertically moving garage doors
for residential use
Appareils électrodomestiques et analogues – Sécurité –
Partie 2-95: Exigences particulières pour les motorisations de portes de garage
à ouverture verticale, pour usage résidentiel
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 13.120; 29.120.01; 91.090 ISBN 978-2-8322-7645-7
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 5 ----------------------
SIST EN IEC 60335-2-95:2023
– 2 – IEC 60335-2-95:2019 © IEC 2019
CONTENTS
FOREWORD . 3
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 General requirement . 8
5 General conditions for the tests . 8
6 Classification . 9
7 Marking and instructions . 9
8 Protection against access to live parts . 11
9 Starting of motor-operated appliances . 11
10 Power input and current . 11
11 Heating . 12
12 Void . 12
13 Leakage current and electric strength at operating temperature . 12
14 Transient overvoltages . 12
15 Moisture resistance . 12
16 Leakage current and electric strength . 12
17 Overload protection of transformers and associated circuits . 13
18 Endurance . 13
19 Abnormal operation . 13
20 Stability and mechanical hazards . 13
21 Mechanical strength . 18
22 Construction . 18
23 Internal wiring . 19
24 Components . 19
25 Supply connection and external flexible cords . 20
26 Terminals for external conductors . 20
27 Provision for earthing . 20
28 Screws and connections . 20
29 Clearances, creepage distances and solid insulation . 20
30 Resistance to heat and fire . 20
31 Resistance to rusting . 20
32 Radiation, toxicity and similar hazards . 21
Annexes . 24
Annex R (normative) Software evaluation . 25
Bibliography . 26
Figure 101 – Examples of types of garage doors. 22
Figure 102 – Example of pictogram warning against child entrapment . 23
---------------------- Page: 6 ----------------------
SIST EN IEC 60335-2-95:2023
IEC 60335-2-95:2019 © IEC 2019 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
SAFETY –
Part 2-95: Particular requirements for drives for vertically
moving garage doors for residential use
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60335-2-95 has been prepared by IEC technical committee 61:
Safety of household and similar electrical appliances.
This fourth edition cancels and replaces the third edition published in 2011, Amendment 1:
2015 and Amendment 2:2017. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) the text has been aligned with edition 5.2 of Part 1;
b) reference to IEC 60335-2-97 and IEC 60335-2-103 has been revised to correctly state
their titles (Clause 1);
---------------------- Page: 7 ----------------------
SIST EN IEC 60335-2-95:2023
– 4 – IEC 60335-2-95:2019 © IEC 2019
c) specific instruction statements have been revised to separate them from information to be
provided (7.12);
d) the compliance criteria for the tests of 19.11.2 and 19.11.3 has been modified (19.13);
e) the tests for class III appliances and parts of class III constructions have been modified
(25.8, 25.15).
The text of this International Standard is based on the following documents:
FDIS Report on voting
61/5937/FDIS 61/5946/RVD
Full information on the voting for the approval of this International Standard can be found in
the report on voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of the IEC 60335 series, under the general title: Household and similar
electrical appliances – Safety, can be found on the IEC website.
This part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its
amendments. It was established on the basis of the fifth edition (2010) of that standard.
NOTE 1 When “Part 1” is mentioned in this standard, it refers to IEC 60335-1.
This part 2 supplements or modifies the corresponding clauses in IEC 60335-1, so as to
convert that publication into the IEC standard: Safety requirements for drives for vertically
moving garage doors for residential use.
When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies
as far as is reasonable. When this standard states “addition”, “modification” or “replacement”,
the relevant text in Part 1 is to be adapted accordingly.
NOTE 2 The following numbering system is used:
– subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1;
– unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including
those in a replaced clause or subclause;
– additional annexes are lettered AA, BB, etc.
NOTE 3 The following print types are used:
– requirements: in roman type;
– test specifications: in italic type;
– notes: in small roman type.
Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the
associated noun are also in bold.
The committee has decided that the contents of the base publication and its amendments will
remain unchanged until the stability date indicated on the IEC web site under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
---------------------- Page: 8 ----------------------
SIST EN IEC 60335-2-95:2023
IEC 60335-2-95:2019 © IEC 2019 – 5 –
NOTE 4 The attention of National Committees is drawn to the fact that equipment manufacturers and testing
organizations may need a transitional period following publication of a new, amended or revised IEC publication in
which to make products in accordance with the new requirements and to equip themselves for conducting new or
revised tests.
It is the recommendation of the committee that the content of this publication be adopted for implementation
nationally not earlier than 12 months or later than 36 months from the date of publication.
The following differences exist in the countries indicated below.
– 6.1: Class 0I appliances are allowed (Japan).
– 7.1: Additional markings are required (USA).
– 7.12.1: Additional warnings and instructions are required (USA).
– 11.7: The test conditions are different (USA).
– 19.9: A running overload test is carried out (USA).
– 20.101: The test is not carried out (USA).
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.
---------------------- Page: 9 ----------------------
SIST EN IEC 60335-2-95:2023
– 6 – IEC 60335-2-95:2019 © IEC 2019
INTRODUCTION
It has been assumed in the drafting of this International Standard that the execution of its
provisions is entrusted to appropriately qualified and experienced persons.
This standard recognizes the internationally accepted level of protection against hazards such
as electrical, mechanical, thermal, fire and radiation of appliances when operated as in
normal use taking into account the manufacturer's instructions. It also covers abnormal
situations that can be expected in practice and takes into account the way in which
electromagnetic phenomena can affect the safe operation of appliances.
This standard takes into account the requirements of IEC 60364 as far as possible so that
there is compatibility with the wiring rules when the appliance is connected to the supply
mains. However, national wiring rules may differ.
If an appliance within the scope of this standard also incorporates functions that are covered
by another part 2 of IEC 60335, the relevant part 2 is applied to each function separately, as
far as is reasonable. If applicable, the influence of one function on the other is taken into
account.
When a part 2 standard does not include additional requirements to cover hazards dealt with
in Part 1, Part 1 applies.
NOTE 1 This means that the technical committees responsible for the part 2 standards have determined that it is
not necessary to specify particular requirements for the appliance in question over and above the general
requirements.
This standard is a product family standard dealing with the safety of appliances and takes
precedence over horizontal and generic standards covering the same subject.
NOTE 2 Horizontal and generic standards covering a hazard are not applicable since they have been taken into
consideration when developing the general and particular requirements for the IEC 60335 series of standards. For
example, in the case of temperature requirements for surfaces on many appliances, generic standards, such as
ISO 13732-1 for hot surfaces, are not applicable in addition to Part 1 or part 2 standards.
An appliance that complies with the text of this standard will not necessarily be considered to
comply with the safety principles of the standard if, when examined and tested, it is found to
have other features that impair the level of safety covered by these requirements.
An appliance employing materials or having forms of construction differing from those detailed
in the requirements of this standard may be examined and tested according to the intent of
the requirements and, if found to be substantially equivalent, may be considered to comply
with the standard.
---------------------- Page: 10 ----------------------
SIST EN IEC 60335-2-95:2023
IEC 60335-2-95:2019 © IEC 2019 – 7 –
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
SAFETY –
Part 2-95: Particular requirements for drives for vertically
moving garage doors for residential use
1 Scope
This clause of Part 1 is replaced by the following.
This part of IEC 60335 deals with the safety of electric drives for garage doors for residential
use that open and close in a vertical direction, the rated voltage of the drives being not more
than 250 V for single-phase appliances and 480 V for other appliances. It also covers the
hazards associated with the movement of these electrically driven garage doors.
NOTE 101 Examples of garage doors are shown in Figure 101.
NOTE 102 The drive can be supplied with a garage door.
NOTE 103 This standard also applies to entrapment protection devices for use with drives. It does not cover
hazards related to the mechanisms of the door itself.
As far as is practicable, this standard deals with the common hazards presented by
appliances that are encountered by all persons in and around the home. However, in general,
it does not take into account playing with the appliance by young children, but recognizes that
children may be in the vicinity of the garage door.
NOTE 104 Attention is drawn to the fact that in many countries additional requirements are specified by the
national authorities responsible for the protection of labour and similar authorities.
NOTE 105 This standard does not apply to drives
– for shutters, awnings, blinds and similar equipment (IEC 60335-2-97);
– for gates, doors and windows (IEC 60335-2-103);
– for commercial and industrial purposes;
– intended to be used in locations where special conditions prevail, such as the presence of a corrosive or
explosive atmosphere (dust, vapour or gas).
2 Normative references
This clause of Part 1 is applicable except as follows.
Addition:
IEC 60068-2-52:2017, Environmental testing – Part 2-52: Tests – Test Kb: Salt mist, cyclic
(sodium chloride solution)
3 Terms and definitions
This clause of Part 1 is applicable except as follows.
---------------------- Page: 11 ----------------------
SIST EN IEC 60335-2-95:2023
– 8 – IEC 60335-2-95:2019 © IEC 2019
3.1 Definitions relating to physical characteristics
3.1.9 Replacement:
normal operation
operation of the drive under the following conditions:
Drives supplied without a door are operated with their rated load.
Drives supplied with a door are operated with the door installed in accordance with the
instructions.
3.1.101
rated load
force or torque assigned to the drive by the manufacturer
3.5 Definitions relating to types of appliances
3.5.101
drive
motor and other components that control the movement of the door
Note 1 to entry: Examples of components are gears, controls, brakes and entrapment protection systems.
3.5.102
automatic drive
drive that operates the door in at least one direction without intentional activation by the user
3.7 Definitions relating to safety components
3.7.101
biased-off switch
switch that automatically returns to the off position when its actuating member is released
3.7.102
entrapment protection system
part of the drive that protects against trapping which could result in the human body being
squeezed or crushed by the door
Note 1 to entry: Trapping in the garage is covered by the manual release of 20.109.
Note 2 to entry: An entrapment protection system may be incorporated in the motor assembly or may be
installed separately. It may consist of one or more devices, such as pressure sensitive edges, passive infrared,
active light sensing devices or a biased-off switch.
4 General requirement
This clause of Part 1 is applicable.
5 General conditions for the tests
This clause of Part 1 is applicable except as follows.
5.2 Addition:
When a test has to be carried out with a door, the door specified for installation with the drive
that gives the most unfavourable conditions for the test is used. An artificial load may be used
to simulate the door for some of the tests. The drive is adjusted in accordance with the
instructions.
---------------------- Page: 12 ----------------------
SIST EN IEC 60335-2-95:2023
IEC 60335-2-95:2019 © IEC 2019 – 9 –
5.5 Addition:
Wicket doors are kept closed during the tests.
6 Classification
This clause of Part 1 is applicable except as follows.
6.1 Modification:
Drives shall be class I, class II or class III.
6.2 Addition:
Drives intended to be exposed to outdoor conditions shall be at least IPX4.
7 Marking and instructions
This clause of Part 1 is applicable except as follows.
7.1 Modification:
Drives shall be marked with the rated power input.
Addition:
Drives supplied without a door shall be marked with the rated load in N or in Nm.
7.12 Addition:
The instructions shall state the substance of the following:
WARNING: Important safety instructions. It is important for the safety of persons to
follow all instructions. Save these instructions.
The instructions shall include the substance of the following:
– do not allow children to play with door controls. Keep remote controls away from children;
– watch the moving door and keep people away until the door is completely opened or
closed (not necessary for automatic drives);
– take care when operating the manual release since an open door may fall rapidly due to
weak or broken springs, or being out of balance;
– frequently examine the installation, in particular check cables, springs and mountings for
signs of wear, damage or imbalance. Do not use if repair or adjustment is needed since a
fault in the installation or an incorrectly balanced door may cause injury;
– each month check that the drive reverses when the door contacts a 40 mm high object
placed on the floor. Adjust if necessary and recheck since an incorrect adjustment may
present a hazard;
– disconnect the supply when cleaning or carrying out other maintenance.
The instructions shall include the following information:
– details on how to use the manual release;
– information concerning the adjustment of the door and drive (when applicable).
---------------------- Page: 13 ----------------------
SIST EN IEC 60335-2-95:2023
– 10 – IEC 60335-2-95:2019 © IEC 2019
Instructions for automatic drives shall state the substance of the following:
WARNING: Automatic door – The door may operate unexpectedly, therefore do not
allow anything to stay in the path of the door.
7.12.1 Addition:
The installation instructions shall state the substance of the following:
WARNING: Important safety instructions. Follow all instructions since incorrect
installation can lead to severe injury.
The installation instructions shall include details for the installation of the drive and its
associated components.
For drives supplied without a door, the installation instructions shall indicate the type, size
and mass of doors for which the drive is intended to be used.
The installation instructions shall include the substance of the following:
– before installing the drive, remove all unnecessary ropes or chains and disable any
equipment, such as locks, not needed for powered operation;
– before installing the drive, check that the door is in good mechanical condition, correctly
balanced and opens and closes properly;
– install the actuating member for the manual
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.