Characterization of waste - Determination of total dissolved solids (TDS) in water and eluates

This European standard specifies a method for the determination of total dissolved solids (TDS) in water and eluates, provided they are not volatile under the conditions specified or that they do not release water molecules from hydration. It applies to water and eluates containing more than 200 mg/l of total dissolved solids. Samples with lower amounts of dissolved solids can be analyzed by repetition of the drying step.

Charakterisierung von Abfällen - Bestimmung des Gesamtgehaltes an gelösten Feststoffen (TDS) in Wasser und Eluaten

Diese Europäische Norm legt ein Verfahren zur Bestimmung des Gesamtgehaltes an gelösten Feststoffen (TDS) in Wasser und Eluaten fest, sofern sie nicht unter den angegebenen Bedingungen flüchtig sind bzw. keine Wassermoleküle aus Kristallwasser freisetzen. Die Norm gilt für Wasser und Eluate mit einem Gesamtgehalt an gelösten Feststoffen von mehr als 10 mg/l.

Caractérisation des déchets - Détermination de la concentration en matiéres solides dissoutes totales (TDS) de l'eau et des éluats

Karakterizacija odpadkov - Določevanje celotnih raztopljenih snovi (TDS) v vodi in izlužkih

General Information

Status
Withdrawn
Publication Date
08-Jan-2008
Withdrawal Date
13-Dec-2021
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
14-Dec-2021
Due Date
06-Jan-2022
Completion Date
14-Dec-2021

Relations

Buy Standard

Standard
EN 15216:2008
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.L]OXåNLKCharakterisierung von Abfällen - Bestimmung des Gesamtgehaltes an gelösten Feststoffen (TDS) in Wasser und EluatenCaractérisation des déchets - Détermination de la concentration en matiéres solides dissoutes totales (TDS) de l'eau et des éluatsCharacterization of waste - Determination of total dissolved solids (TDS) in water and eluates13.030.20Liquid wastes. SludgeICS:Ta slovenski standard je istoveten z:EN 15216:2007SIST EN 15216:2008en,fr,de01-februar-2008SIST EN 15216:2008SLOVENSKI
STANDARD



SIST EN 15216:2008



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15216October 2007ICS 13.030.20 English VersionCharacterization of waste - Determination of total dissolvedsolids (TDS) in water and eluatesCaractérisation des déchets - Détermination de laconcentration en matières solides dissoutes totales (TDS)de l'eau et des éluatsCharakterisierung von Abfällen - Bestimmung desGesamtgehaltes an gelösten Feststoffen (TDS) in Wasserund EluatenThis European Standard was approved by CEN on 1 September 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15216:2007: ESIST EN 15216:2008



EN 15216:2007 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.5 2 Terms and definitions.5 3 Principle.5 4 Sample storage and preparation.5 5 Equipment.5 6 Procedure.6 7 Calculation of results.6 8 Quality control.6 9 Performance characteristics.7 10 Test report.7 Annex A (informative)
Summary of general requirements and recommendations.8 Bibliography.9
SIST EN 15216:2008



EN 15216:2007 (E) 3 Foreword This document (EN 15216:2007) has been prepared by Technical Committee CEN/TC 292 “Characterization of waste”, the secretariat of which is held by NEN, in cooperation with CEN/TC 230. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2008, and conflicting national standards shall be withdrawn at the latest by April 2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 15216:2008



EN 15216:2007 (E) 4 Introduction Total dissolved solids are a common sum parameter which is in use in water analysis and in analysis of eluates. TC 292 and TC 230 cooperated on this item to create one horizontal standard which is of most practical use for laboratories. SIST EN 15216:2008



EN 1521
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.