iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN IEC 61851-1:2019/AC:2024

(Corrigendum)

Electric vehicle conductive charging system - Part 1: General requirements (IEC 61851-1:2017/COR1:2023)

Electric vehicle conductive charging system - Part 1: General requirements (IEC 61851-1:2017/COR1:2023)

Konduktive Ladesysteme für Elektrofahrzeuge - Teil 1: Allgemeine Anforderungen (IEC 61851-1:2017/COR1:2023)

Système de charge conductive pour véhicules électriques - Partie 1: Exigences générales (IEC 61851-1:2017/COR1:2023)

Sistem za napajanje električnih vozil prek kabla - 1. del: Splošne zahteve - Popravek AC (IEC 61851-1:2017/COR1:2023)

General Information

Status
Published
Publication Date
17-Dec-2023
ICS
43.120 - Electric road vehicles
Technical Committee
CEV - Electric passenger and commercial vehicles
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
15-Dec-2023
Due Date
19-Feb-2024
Completion Date
18-Dec-2023
Directive
2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
Mandate
M/468 - Standardisation mandate addressed to CEN and CENELEC and ETSI concerning the charging of electric vehicles
M/511 - Mandate to CEN, CENELEC and ETSI relating to harmonised standards in the field of the Low Voltage Directive
Ref Project
EN IEC 61851-1:2019/AC:2023-12 - Electric vehicle conductive charging system - Part 1: General requirements

Relations

Corrects
SIST EN IEC 61851-1:2019 - Electric vehicle conductive charging system - Part 1: General requirements
Effective Date
05-Dec-2023

Buy Standard

EN IEC 61851-1:2019/AC:2024EN IEC 61851-1:2019/AC:2024
PreviousNext
Corrigendum
EN IEC 61851-1:2019/AC:2024
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 61851-1:2019/AC:2024
01-februar-2024
Sistem za napajanje električnih vozil prek kabla - 1. del: Splošne zahteve -
Popravek AC (IEC 61851-1:2017/COR1:2023)
Electric vehicle conductive charging system - Part 1: General requirements (IEC 61851-
1:2017/COR1:2023)
Konduktive Ladesysteme für Elektrofahrzeuge - Teil 1: Allgemeine Anforderungen (IEC
61851-1:2017/COR1:2023)
Système de charge conductive pour véhicules électriques - Partie 1: Exigences
générales (IEC 61851-1:2017/COR1:2023)
Ta slovenski standard je istoveten z: EN IEC 61851-1:2019/AC:2023-12
ICS:
43.120 Električna cestna vozila Electric road vehicles
SIST EN IEC 61851-1:2019/AC:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 61851-1:2019/AC:2024

---------------------- Page: 2 ----------------------
SIST EN IEC 61851-1:2019/AC:2024


EUROPEAN STANDARD EN IEC 61851-
1:2019/AC:2023-12
NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2023

ICS 43.120
English Version
Electric vehicle conductive charging system - Part 1: General
requirements
(IEC 61851-1:2017/COR1:2023)
Système de charge conductive pour véhicules électriques - Konduktive Ladesysteme für Elektrofahrzeuge - Teil 1:
Partie 1: Exigences générales Allgemeine Anforderungen
(IEC 61851-1:2017/COR1:2023) (IEC 61851-1:2017/COR1:2023)
This corrigendum becomes effective on 8 December 2023 for incorporation in the English language version of the EN.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 61851-1:2019/AC:2023-12 E

---------------------- Page: 3 ----------------------
SIST EN IEC 61851-1:2019/AC:2024

EN IEC 61851-1:2019/AC:2023-12



Endorsement notice

The text of the corrigendum IEC 61851-1:2017/COR1:2023 was approved by CENELEC as EN IEC 61851-1:2019/AC:2023-12 without any
modification.

---------------------- Page: 4 ----------------------
SIST EN IEC 61851-1:2019/AC:2024
IEC 61851-1:2017/COR1:2023 – 1 –
© IEC 2023
INTERNATIONAL ELECTROTECHNICAL COMMISSION
COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE
____________

IEC 61851-1 IEC 61851-1
Edition 3.0  2017-02 Édition 3.0  2017-02


ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTÈME DE CHARGE CONDUCTIVE POUR
SYSTEM – VÉHICULES ÉLECTRIQUES –

Part 1: General requirements Partie 1: Exigences générales


CO RRI G E NDUM 1



Corrections to the French version appear after the English text.
Les corrections à la version française sont données après le texte anglais.

4 General requirements
Replace the eighth paragraph with the following:
Assemblies for EV supply equipment shall comply with IEC TS 61439-7 with the exceptions or
additions as indicated in Clause 12.

12.9 Damp heat functional test
Replace the second paragraph with the following:
Conditioning:
− for indoor units, 6 cycles of 24 h each to a damp heat cycling test according to
IEC 60068-2-30 (Test Db) at (40 ± 3) °C and relative humidity of 95 %;
− for outdoor units, two 5-day periods, with each period consisting
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST-TS CLC IEC/TS 61851-3-1:2024(Main)
Electric vehicles conductive charging system - Part 3-1: DC EV supply equipment where protection relies on double or reinforced insulation - General rules and requirements for stationary equipment (IEC/TS 61851-3-1:2023)
CLC IEC/TS 61851-3-1:2023

This part of IEC 61851-3 series (in a first step as Technical Specification for three-year period) together with part 1 of IEC 61851, applies to the equipment for the conductive transfer of electric power between the supply network and an electric road vehicle when connected to the supply network, supply voltage up to 480 V a.c. or up to 400 V d.c. and a rated output voltage up to 480 V a.c. or up to 200 V d.c..The supply systems described in the IEC 61851-3 series are primarily intended for the use by electric road vehicles of category L hereinafter referred to as light electric vehicles (light Evs).
NOTE 1 Light EV includes all electrically propelled two and three wheeled vehicles of Category L1 up to Category L7 according to the definition of ECE-TRANS-WP29-78r2e and all electrically propelled or assisted cycles.Light electric road vehicles (light EVs) imply all road vehicles, including plug-in hybrid road vehicles (PHEV), that derive all or part of their energy from on-board rechargeable energy storage systems, (RESS), including traction batteries.The electrical protection of the complete light EV supply system from the connection to the supply network up to the light EV or removed RESS complies with protective separation between mains and d.c. and with galvanic separation between mains and d.c. or class III.Supplementary requirements for output voltages over 60 V d.c. are given in this document.Supplementary requirements for Class III equipment with output voltages over 15 V d.c. and over 6 V a.c. are given in this document.Requirements for bidirectional energy transfer d.c. to a.c. are under consideration and are not part of this edition.
NOTE 2 This standard is not mandatory for proprietary EV supply system configurations Type B or D according to IEC 61851-3 series provided they have equivalent or higher safety levels.

  • Technical specification
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CLC IEC/TS 61851-3-2:2024(Main)
Electric vehicle conductive charging system - Part 3-2: DC EV supply equipment where protection relies on double or reinforced insulation - Particular requirements for portable and mobile equipment (IEC/TS 61851-3-2:2023)
CLC IEC/TS 61851-3-2:2023

This part of IEC 61851-3 series (in a first step as Technical Specification for three-year period) together with part 1 of IEC61851-3, applies to the d.c. power supply equipment (e.g. VCU) for the conductive transfer of electric power between the supply network and an light electric road vehicle when connected to the supply network , with a rated supply voltage up to 480 V a.c. or up to 400 V d.c. and a rated ìoutputî voltage up to 480 V a.c. or up to 200 V d.c.
The supply systems described in the IEC 61851-3 series are primarily intended for the use by EVs of category L hereinafter referred to as light electric vehicles (light EVs).
NOTE 1 Light EV includes all electrically propelled two and three wheeled vehicles of Category L1 up to Category L7 according to the definition of ECE-TRANS-WP29-78r2e and all electrically propelled or assisted cycles.
The electrical protection of the complete light EV supply system from the connection to the supply network up to the light EV or removed RESS complies with protective separation and with galvanic separation between a.c. input and d.c. output or class III.

  • Technical specification
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CLC IEC/TS 61851-3-5:2024(Main)
Electric vehicles conductive charging system - Part 3-5: DC EV supply equipment where protection relies on double or reinforced insulation - Pre-defined communication parameters and general application objects (IEC/TS 61851-3-5:2023)
CLC IEC/TS 61851-3-5:2023

This part of IEC 61851-3 series (in a first step as Technical Specification for three-year period) together with part 1 of IEC61851-3, applies to communication for the conductive transfer of electric power between the supply network and a light electric road vehicle or a removable RESS or traction-battery of a light electric road vehicle, with a rated supply voltage up to 480 V a.c. or up to 400 V d.c. and a rated ìoutputî voltage up to 480 V a.c. or up to 200 V d.c..
Energy management system for control of power transfer between battery systems and voltage converter units specifies the communication for all devices that may take part in energy management control. Such energy control applications may be implemented in e.g. light electric vehicles, robots, offshore parks, isolated farms, etc.
This part of IEC 61851-3 series provides specifications with regard to the pre-defined communication parameters and general application objects.

  • Technical specification
    176 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CLC IEC/TS 61851-3-6:2024(Main)
Electric vehicles conductive charging system - Part 3-6: DC EV supply equipment where protection relies on double or reinforced insulation - Voltage converter unit communication (IEC/TS 61851-3-6:2023 )
CLC IEC/TS 61851-3-6:2023

This part of IEC 61851-3 series as a technical specification together with part 3-1 and with part 1 of IEC61851, applies to communication for the conductive transfer of electric power between the supply network and a light electric road vehicle to a removable RESS or traction-battery of a light EV when connected to the supply network, with a rated supply voltage up to 480 V a.c. or up to 400 V d.c. and a rated ìoutputî voltage up to 480 V a.c. or up to 200 V d.c..
Energy management system for control of power transfer between battery systems and voltage converter units specifies the communication for all devices that may take part in energy management control. Such energy control applications may be implemented in e.g. light electric vehicles, robots, offshore parks, isolated farms, etc.
This part of IEC 61851-3 series provides application objects provided by the AC-DC voltage converter unit or DC/DC voltage converter unit

  • Technical specification
    165 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CLC IEC/TS 61851-3-4:2024(Main)
Electric vehicles conductive charging system - Part 3-4: DC EV supply equipment where protection relies on double or reinforced insulation - General definitions and requirements for CANopen communication (IEC/TS 61851-3-4:2023)
CLC IEC/TS 61851-3-4:2023

This part of IEC 61851-3 series (in a first step as Technical Specification for three-year period) together with part 1 of IEC 61851-3, applies to communication for the conductive transfer of electric power between the supply network and a light electric road vehicle or a removable RESS or traction-battery of a light electric road vehicle, with a rated supply voltage up to 480 V a.c. or up to 400 V d.c. and a rated ìoutputî voltage up to 480 V a.c. or up to 200 V d.c..
Energy management system for control of power transfer between battery systems and voltage converter units specifies the communication for all devices that may take part in energy management control.
The basic application profile for energy management systems consists of the following parts:
Part 3-4: General definitions for communication;   Part 3-5: Pre-defined communication parameters and general application objects;    Part 3-6: Voltage converter unit communication;
  Part 3-7: Battery system communication.

  • Technical specification
    106 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CLC IEC/TS 61851-3-7:2024(Main)
Electric vehicles conductive charging system - Part 3-7: DC EV supply equipment where protection relies on double or reinforced insulation - Battery system communication (IEC/TS 61851-3-7:2023)
CLC IEC/TS 61851-3-7:2023

This part of IEC 61851-3 series as a technical specification together with part 3-1 and with part 1 of IEC61851, applies to communication for the conductive transfer of electric power between the supply network and a light electric road vehicle to a removable RESS or traction-battery of a light EV when connected to the supply network, with a rated supply voltage up to 480 V a.c. or up to 400 V d.c. and a rated ìoutputî voltage up to 480 V a.c. or up to 200 V d.c..
Energy management system for control of power transfer between battery systems and voltage converter units specifies the communication for all devices that may take part in energy management control. Such energy control applications may be implemented in e.g. light electric vehicles, robots, offshore parks, isolated farms, etc.
This part of IEC 61851-3 series specifies application objects provided by the battery system.

  • Technical specification
    109 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61980-2:2023(Main)
Electric vehicle wireless power transfer (WPT) systems - Part 2: Specific requirements for MF-WPT system communication and activities (IEC 61980-2:2023)
EN IEC 61980-2:2023

This Part of IEC 61980 addresses communication and activities of magnetic field wireless power transfer (MF-WPT) systems.
The requirements in this document are intended to be applied for MF-WPT systems accordin to IEC 61980-3 and ISO 19363.
The aspects covered in this document include:
- operational and functional characteristics of the MF-WPT communication system and related activities
- operational and functional characteristics of the positioning system
The following aspects are under consideration for future documents:
- requirements for two- and three-wheel vehicles,
- requirements for MF-WPT systems supplying power to EVs in motion, and
- requirements for bidirectional power transfer
Note: Any internal communication at Supply device or EV device is not in the scope of this document

  • Standard
    97 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61980-3:2023(Main)
Electric vehicle wireless power transfer (WPT) systems - Part 3: Specific requirements for the magnetic field wireless power transfer systems (IEC 61980-3:2022)
EN IEC 61980-3:2022

This part of IEC 61980 applies to the off-board supply equipment for wireless power transfer via magnetic field (MF-WPT) to electric road vehicles for purposes of supplying electric energy to the RESS (rechargeable energy storage system) and/or other on-board electrical systems. The MF-WPT system operates at standard supply voltage ratings per IEC 60038 up to 1 000 V AC and up to 1 500 V DC from the supply network. The power transfer takes place while the electric vehicle (EV) is stationary.
Off-board supply equipment fulfilling the requirements in this document are intended to operate with EV devices fulfilling the requirements described in ISO 19363.
The aspects covered in this document include
- the characteristics and operating conditions,
- the required level of electrical safety,
- requirements for basic communication for safety and process matters if required by a MF111 WPT system,
- requirements for positioning to assure efficient and safe MF-WPT power transfer, and
- specific EMC requirements for MF-WPT systems.
The following aspects are under consideration for future documents:
- requirements for MF-WPT systems for two- and three-wheel vehicles,
- requirements for MF-WPT systems supplying power to EVs in motion, and
- requirements for bidirectional power transfer.
- requirements for flush mounted primary devices
- requirements for MF-WPT systems for heavy duty vehicles
- requirements for MF-WPT systems with inputs greater than 11,1 kVA
This standard does not apply to
- safety aspects related to maintenance, and
- trolley buses, rail vehicles and vehicles designed primarily for use off-road.
NOTE The terms used in this document are specifically for MF-WPT.

  • Standard
    121 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 63119-2:2023(Main)
Information exchange for electric vehicle charging roaming service - Part 2: Use cases (IEC 63119-2:2022)
EN IEC 63119-2:2022

The Standard specifies roaming use cases of information exchange between EV Charge Service Providers (CSP), Charging Station Operators (CSOs) and Clearing House platforms through roaming endpoints. The elementary use cases defined in this document of IEC 63119-2 are designed to support the user to have access to the EV supply equipment which doesn’t belong to the Home-CSP.
IEC 63119 series are applicable to high-level communication involved in information exchange/interaction between different CSPs, as well as between a CSP and CSO with or without Clearing House platform through the roaming endpoint.
IEC 63119 series do not specify the communication either between Charging Station (CS) and Charging Station Operator (CSO) or between EV and CS.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 63110-1:2022(Main)
Protocol for Management of Electric Vehicles charging and discharging infrastructures - Part 1: Basic Definitions, Use Cases and architecture
EN IEC 63110-1:2022

The scope of this document, as a basis for the other parts of IEC 63110, covers the definitions, use cases and architecture for the management of electric vehicles charging and discharging infrastructures.
It addresses the general requirements for the establishment of an e-mobility eco-system, therefore covering the communication flows between the different e-mobility actors as well as data flows with the electric power system.
This standard covers the following features:
- Management of energy transfer (e.g. charging session), reporting, including information exchanges related to the required energy, grid usage, contractual data, metering data;
- Asset management of EV supply equipment, including controlling, monitoring, maintenance, provisioning, firmware update, and configuration (profiles) of EV supply equipment;
- Authentication/authorisation/payment of charging and discharging sessions, incl. roaming, pricing and metering information;
- The provision of other e-mobility services;
- Cybersecurity.

  • Standard
    155 pages
    English language
    sale 10% off
    e-Library read for
    1 day