SIST EN 818-3:2001/oprA1:2006

Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings - Grade 4

This Part of EN 818 specifies the requirements related to safety for short link lifting chains, Grade 4, of medium tolerance for use in chain slings and for general lifting purposes. The standard is applicable to electrically welded round steel short link chains, conforming to EN 818-1, which are intended for lifting objects, materials or goods.  The range of nominal sizes of chain covered by this Part of EN 818 is from 7 mm to 45 mm.  The hazards covered by this Part of EN 818 are identified in clause 4.  Annex A contains the bases for calculation of tabulated values for dimensions, working load limits and mechanical properties.  Annex B gives information on the mass/metre of chain.  Annex C gives an example of a designation system for chains of grade 4.  Annex ZA gives the relationship with EU-Directives

Kurzgliedrige Rundstahlketten für Hebezwecke - Sicherheit - Teil 3: Mittelorientierte Rundstahlketten für Anschlagketten - Güteklasse 4

Chaînes de levage a maillons courts - Sécurité - Partie 3 : Chaînes de tolérance moyenne pour élingues en chaînes - Classe 4

Kratkočlene okrogle verige za dvigovalne namene – Varnost – 3. del: Verige za obesne verige srednje tolerance – Kakovostni razred 4

General Information

• Status: Not Published
• Technical Committee: DTN - Lift and transport appliances
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 17-Aug-2010
• Due Date: 22-Aug-2010
• Completion Date: 19-Aug-2010
• Directive: 98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Ref Project: EN 818-3:1999/prA1 - Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings - Grade 4

Relations

• Consolidated By: SIST EN 818-3:2001+A1:2008 - Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings - Grade 4
• Effective Date: 18-Jan-2023
• Consolidated By: SIST EN 818-3:2001+A1:2008 - Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings - Grade 4
• Effective Date: 01-Jul-2008
• Consolidated By: SIST EN 818-3:2001+A1:2008 - Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings - Grade 4
• Effective Date: 19-Jan-2023
• Revised: SIST EN 818-3:2001 - Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings - Grade 4
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 818-3:2001/oprA1:2006
.UDWNRþOHQHRNURJOHYHULJH]DGYLJRYDOQHQDPHQH±9DUQRVW±GHO9HULJH]D
REHVQHYHULJHVUHGQMHWROHUDQFH±.DNRYRVWQLUD]UHG
Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain
slings - Grade 4
Kurzgliedrige Rundstahlketten für Hebezwecke - Sicherheit - Teil 3: Mittelorientierte
Rundstahlketten für Anschlagketten - Güteklasse 4
Chaînes de levage a maillons courts - Sécurité - Partie 3 : Chaînes de tolérance
moyenne pour élingues en chaînes - Classe 4
Ta slovenski standard je istoveten z: EN 818-3:1999/prA1
SIST EN 818-3:2001/oprA1:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 818-3:2001/oprA1:2006

---------------------- Page: 2 ----------------------

SIST EN 818-3:2001/oprA1:2006
EUROPEAN STANDARD
DRAFT
EN 818-3:1999
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
June 2006
ICS

English Version
Short link chain for lifting purposes - Safety - Part 3: Medium
tolerance chain for chain slings - Grade 4
Chaînes de levage à maillons courts - Sécurité - Partie 3 :
Chaînes de tolérance moyenne pour élingues en chaînes -
Classe 4
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 168.
This draft amendment A1, if approved, will modify the European Standard EN 818-3:1999. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status
as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation
...