SIST EN 12512:2002
(Main)Timber structures - Test methods - Cyclic testing of joints made with mechanical fasteners
Timber structures - Test methods - Cyclic testing of joints made with mechanical fasteners
This European Standard specifies a test method for determining the ductility, impairment of strength and energy dissipation properties of joints made with mechanical fasteners under cyclic loading.
NOTE This standard is written, for uniformity, in terms of direct axial loads and their effects only. The standard is, however, also appropriate to the determination of the moment resisting properties of joints.
Holzbauwerke - Prüfverfahren - Zyklische Prüfungen von Anschlüssen mit mechanischen Verbindungsmitteln
Diese Europäische Norm legt ein Prüfverfahren für die Bestimmungen der Duktilität, Festigkeitsminderung und der Energiedissipationseigenschaften für Anschlüsse mit Verbindungsmitteln bei zyklischer Belastung fest.
ANMERKUNG In der vorliegenden Norm werden einheitlich nur direkte axiale Beanspruchungen und deren Wirkungen behandelt. Diese Norm kann jedoch auch für die Bestimmung momentaufnehmender Eigenschaften von Verbindungen angewendet werden.
Structures en bois - Méthodes d'essai - Essais cycliques d'assemblages réalisés par organes mécaniques
La présente norme définit une procédure d'essai pour déterminer les propriétés de ductilité, d'affaiblissement de la résistance et de dissipation d'énergie des assemblages réalisés avec des organes mécaniques sous charge cyclique.
NOTE Pour I'uniformité, cette norme est écrite en termes de charges axiales directes et de leurs effets uniquement. Cependant, la norme est également appropriée pour la détermination des propriétés du moment résistant assemblages.
Lesene konstrukcije - Preskusni postopki - Ciklično preskušanje spojev z mehanskimi veznimi sredstvi
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Holzbauwerke - Prüfverfahren - Zyklische Prüfungen von Anschlüssen mit mechanischen VerbindungsmittelnStructures en bois - Méthodes d'essai - Essais cycliques d'assemblages réalisés par organes mécaniquesTimber structures - Test methods - Cyclic testing of joints made with mechanical fasteners91.080.20Lesene konstrukcijeTimber structures21.060.01Vezni elementi na splošnoFasteners in generalICS:Ta slovenski standard je istoveten z:EN 12512:2001SIST EN 12512:2002en01-julij-2002SIST EN 12512:2002SLOVENSKI
STANDARD
SIST EN 12512:2002
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12512November 2001ICS 21.060.01; 91.080.20English versionTimber structures - Test methods - Cyclic testing of joints madewith mechanical fastenersStructures en bois - Méthodes d'essai - Essais cycliquesd'assemblages réalisés par organes mécaniquesHolzbauwerke - Prüfverfahren - Zyklische Prüfungen vonAnschlüssen mit mechanischen VerbindungsmittelnThis European Standard was approved by CEN on 5 October 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12512:2001 ESIST EN 12512:2002
EN 12512:2001 (E)2ContentspageForeword.3Introduction.41Scope.52Normative references.53Terms and definitions.54Symbols and abbreviations.105Requirements.106Test methods.106.1Principles.106.2Apparatus.106.3Preparation of the specimens.116.3.1Conditioning.116.3.2Test laboratory.116.3.3Moisture content.116.4Procedures.116.4.1General.116.4.2Complete procedure.116.4.3Short procedure.127Results.138Test reports.13SIST EN 12512:2002
EN 12512:2001 (E)3ForewordThis European Standard has been prepared by Technical Committee CEN/TC 124 "Timber structures",the secretariat of which is held by DS.This European Standard shall be given the status of a national standard, either by publication of anidentical text or by endorsement, at the latest by May 2002, and conflicting national standards shall bewithdrawn at the latest by May 2002.According to the CEN/CENELEC Internal Regulations, the national standards organizations of thefollowing countries are bound to implement this European Standard: Austria, Belgium, Czech Republic,Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway,Portugal, Spain, Sweden, Switzerland and the United Kingdom.SIST EN 12512:2002
EN 12512:2001 (E)4IntroductionDevelopments in the field of load-bearing engineered timber structures in seismic regions require thatjoints made with mechanical fasteners be tested to obtain information about their ductility, dissipation ofenergy and impairment of strength under cyclic loading.This standard lays down general principles, which should be followed in order to achieve comparability ofresults from investigations carried out in different laboratories.For different purposes two different testing procedures are considered: a general one, when thedetermination of the complete cyclic load-slip performance is required (complete procedure), and aparticular one when only the determination of the main performances at a pre-determined ductility levelis required (short procedure).SIST EN 12512:2002
EN 12512:2001 (E)51 ScopeThis European Standard specifies a test method for determining the ductility, impairment of strength andenergy dissipation properties of joints made with mechanical fasteners under cyclic loading.NOTE
This standard is written, for uniformity, in terms of direct axial loads and their effects only. The standard is,however, also appropriate to the determination of the moment resisting properties of joints.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications.These normative references are cited at the appropriate places in the text, and the publications are listedhereafter. For dated references, subsequent amendments to or revisions of any of these publicationsapply to this European Standard only when incorporated in it by amendment or revision. For undatedreferences the latest edition of the publication referred to applies (including amendments).EN 26891, Timber structures - Joints made with mechanical fasteners - General principlesfor the determination of strength and deformation characteristics (ISO 6891:1983).3 Terms and definitionsFor the purposes of this European Standard, the following terms and definitions apply:3.1cyclic loadalternative load in compression and tension3.2maximum loadmaximum joint load reached during test, Fmax, s
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.