SIST EN 12927-1:2005
(Main)Safety requirements for cableway installations designed to carry persons - Ropes - Part 1: Selection criteria for ropes and their end fixings
Safety requirements for cableway installations designed to carry persons - Ropes - Part 1: Selection criteria for ropes and their end fixings
This part of EN 12927 specifies the safety requirements applicable to the selection criteria for ropes and their end fixings for installations for passenger transportation by rope. Its requirements are to be met taking into account the various types installations systems and their environment.
This part of EN 12927 provides guidance on the selection of ropes and their end fixing for use on cableways.
It does not apply for transportation of goods nor to inclined lifts.
Sicherheitsanforderungen für Seilbahnen für den Personenverkehr - Seile - Teil 1: Auswahlkriterien für Seile und Seilendbefestigungen
Diese Europäische Norm legt die Sicherheitsanforderungen für Seile - Auswahlkriterien für Seile und Seilendbefestigungen der Seilbahnen und Schleppaufzügen des Personenverkehrs fest. Dabei werden die verschiedenen Seilbahn- und Schleppaufzugsysteme und deren Umgebung berücksichtigt. Die Europäische Norm legt die Anforderungen für die Auswahl von Seilen und der Seilendverbindungen fest für den Gebrauch in der Seilbahn. Sie gilt weder für Seilbahnen und Schleppaufzüge des Güterverkehrs, noch für die Schrägaufzüge.
Prescriptions de sécurité des installations a câbles transportant des personnes - Câbles - Partie 1 : Criteres de sélection des câbles et de leurs attaches d'extrémité
La présente partie de l'EN 12927 spécifie les prescriptions de sécurité applicables aux criteres de sélection des câbles et de leurs attaches d'extrémité des installations a câbles transportant des personnes. Ses prescriptions doivent etre respectées en tenant compte des différents systemes d'installations et de leur environnement.
La présente partie de l'EN 12927 donne des indications relatives au choix des câbles et de leurs attaches d'extrémité pour une utilisation dans le cadre des remontées mécaniques.
Elle ne s'applique ni au transport de marchandises, ni aux ascenseurs inclinés.
Varnostne zahteve za žičniške naprave za prevoz oseb – Vrvi – 1. del: Kriteriji za izbiro vrvi in pritrditev njihovih koncev
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Safety requirements for cableway installations designed to carry persons - Ropes - Part 1: Selection criteria for ropes and their end fixingsPrescriptions de sécurité des installations a câbles transportant des personnes - Câbles - Partie 1 : Criteres de sélection des câbles et de leurs attaches d'extrémitéSicherheitsanforderungen für Seilbahnen für den Personenverkehr - Seile - Teil 1: Auswahlkriterien für Seile und SeilendbefestigungenTa slovenski standard je istoveten z:EN 12927-1:2004SIST EN 12927-1:2005en45.100Cableway equipmentICS:SLOVENSKI
STANDARDSIST EN 12927-1:200501-januar-2005
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12927-1October 2004ICS 45.100English versionSafety requirements for cableway installations designed to carrypersons - Ropes - Part 1: Selection criteria for ropes and theirend fixingsPrescriptions de sécurité des installations à câblestransportant des personnes - Câbles - Partie 1 : Critères desélection des câbles et de leurs attaches d'extrémitéSicherheitsanforderungen für Seilbahnen undSchleppaufzüge des Personenverkehrs - Seile - Teil 1:Auswahlkriterien für Seile und SeilbefestigungenThis European Standard was approved by CEN on 23 August 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12927-1:2004: E
EN 12927-1:2004 (E) 2 Contents Page Foreword.3 1 Scope.5 2 Normative references.5 3 Terms and definitions.6 4 General requirements.6 5 Safety principle.6 5.1 General.6 5.2 Hazard scenarios.7 5.3 Safety measures.7 6 Safety requirements.7 6.1 Ropes.7 6.2 End fixings.7 Table 1 — Rope selection criteria.8 Table 1 (end).9 Table 2 — End fixings selection criteria.10 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 2000/9/EC relating to cableway installations designed to carry persons.11 Table ZA — Correspondence between this European Standard and Directive 2000/9/EC relating to cableway installations designed to carry persons.11
EN 12927-1:2004 (E) 3 Foreword This document (EN 12927-1:2004) has been prepared by Technical Committee CEN/TC 242 “Safety requirements for passenger transportation by rope”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2005, and conflicting national standards shall be withdrawn at the latest by April 2005. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This EN 12927 includes the following parts under the general title "Safety requirements for cableway installations designed to carry persons
– Ropes": Part 1: Selection criteria for ropes and their end fixings Part 2: Safety factors Part 3: Long splicing of 6 strand hauling, carrying-hauling and towing ropes Part 4: End fixings Part 5: Storage, transportation, installation and tensioning Part 6: Discard criteria Part 7: Inspection, repair and maintenance Part 8: Magnetic rope testing (MRT) This European Standard forms part of the standards programme adopted by the CEN Technical Board in relation of safety requirements for passenger transportation by rope. This programme includes the following standards : 1) Safety requirements for cableway installations designed to carry persons
- Terminology 2) Safety requirements for cableway installations designed to carry persons
- General requirements
3) Safety requirements for cableway installations designed to carry persons
– Calculations 4) Safety requirements for cableway installations designed to carry persons
- Ropes
5) Safety requirements for cableway installations designed to carry persons
- Tensioning devices
6) Safety requirements for cableway installations designed to carry persons
- Drive systems and other mechanical equipment 7) Safety requirements for cableway installations designed to carry persons
– Carriers
8) Safety requirements for cableway installations designed to carry persons
- Electrical equipment other than for drive systems 9) Safety requirements for cableway installations designed to carry persons
- Civil engineering works
EN 12927-1:2004 (E) 4 10) Safety requirements for cableway installations designed to carry persons
– Pre-commissioning inspection, maintenance and operational inspection and checks 11) Safety requirements for cableway installations designed to carry persons
– Recovery and evacuation
12) Safety requirements for passenger transportation by rope - Operation
13) Safety requirements for cableway installations designed to carry persons
- Quality assurance
Together these form a series of standards regarding design, manufacture, production, maintenance and operation of all installations for passenger transportation by rope. In respect of ski-tows, the drafting of this European Standard has been guided by the works of the International Organisation for Transportation by rope (OITAF). According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EN 12927-1:2004 (E) 5 1 Scope This part of EN 12927 specifies the safety requirements applicable to the selection criteria for ropes and their end fixings for installations for passenger transportation by rope. Its requirements are to be met taking into account the various types installations systems and their environment. This part of EN 12927 provides guidance on the selection of ropes and their end fixing for use on cableways. It does not apply for transportation of goods nor to inclined lifts. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.