SIST EN 12573-4:2000

Welded static non-pressurised thermoplastic tanks - Part 4: Design and calculation of flanged joints

This part of this standard specifies the design and calculation of circular flanged joints, fabricated in the following thermoplastics: Polyethylene (PE), Polypropylene (PP), Poly (vinyl chloride) (PVC), Ply (vinylidene fluoride) (PVDF)

Geschweißte orstfeste drucklose Behälter (Tanks) aus Thermoplasten - Teil 4: Konstruktion und Berechnung von Flanschverbindungen

Dieser Teil der Europäischen Norm legt die Konstruktion und Berechnung von runden Flanschverbindungen fest, die aus den folgenden Thermoplasten gefertigt werden: Polyethylen (PE), Polypropylen (PP), Polyvinylchlorid (PVC), Polyvinylidenfluorid (PVDF).

Cuves statiques soudées en matieres thermoplastiques sans pression - Partie 4: Conception et calculs des joints a brides

La présente partie de cette norme européenne spécifie la conception et le calcul des joints circulaires a brides, fabriqués a l'aide des matieres thermoplastiques suivantes: polyéthylene (PE), polypropylene (PP), polychlorure de vinyle (PVC), polyfluorure de vinylidene (PVDF).

Welded static non-pressurised thermoplastic tanks - Part 4: Design and calculation of flanged joints

General Information

• Status: Published
• Publication Date: 30-Nov-2000
• ICS: 23.020.10 - Stationary containers and tanks
• ICS: 23.040.60 - Flanges, couplings and joints
• Technical Committee: SS SPL - Technical Board for the general field
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Dec-2000
• Due Date: 01-Dec-2000
• Completion Date: 01-Dec-2000
• Ref Project: EN 12573-4:2000 - Welded static non-pressurised thermoplastic tanks - Part 4: Design and calculation of flanged joints

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Welded static non-pressurised thermoplastic tanks - Part 4: Design and calculation of flanged jointsGeschweißte orstfeste drucklose Behälter (Tanks) aus Thermoplasten - Teil 4: Konstruktion und Berechnung von FlanschverbindungenCuves statiques soudées en matieres thermoplastiques sans pression - Partie 4: Conception et calculs des joints a bridesWelded static non-pressurised thermoplastic tanks - Part 4: Design and calculation of flanged joints23.040.60Prirobnice, oglavki in spojni elem
...