iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60034-9:1999

(Main)

Rotating electrical machines -- Part 9: Noise limits

Rotating electrical machines -- Part 9: Noise limits

Specifies maximum permissible A-weighted sound power levels for rotating electrical machines complying with EN 60034-1, having methods of cooling according to EN 60034-6 and degrees of protection according to EN 60034-5 and having a rated output from 1kW up to 5500kW with a speed limited to 3750 r/mn

Drehende elektrische Maschinen -- Teil 9: Geräuschgrenzwerte

Machines électriques tournantes -- Partie 9: Limites de bruits

La présente norme spécifie les niveaux maximaux admissibles de puissance acoustique pondérée A pour les machines électriques tournantes conformes à la EN 60034-1 dont les modes de refroidissement sont conformes à la EN 60034-6 et les degrés de protection conformes à la EN 60034-5 et ayant une puissance assignée de 1kW à 5500kW avec une vitesse limitée à 3750 tr/mn

Rotating electrical machines - Part 9: Noise limits (IEC 60034-9:1997)

General Information

Status
Withdrawn
Publication Date
31-Mar-1999
Withdrawal Date
31-Dec-2005
ICS
17.140.20 - Noise emitted by machines and equipment
29.160.01 - Rotating machinery in general
Technical Committee
ERS - Rotating machinery
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Jan-2006
Due Date
01-Jan-2006
Completion Date
01-Jan-2006
Directive
73/23/EEC - Electrical equipment designed for use within certain voltage limits
Ref Project
EN 60034-9:1997 - Rotating electrical machines - Part 9: Noise limits

Relations

Official Journal Project Relation
SIST EN 60034-9:2006 - Rotating electrical machines - Part 9: Noise limits (IEC 60034-9:2003, modified)
Effective Date
16-Mar-2010
Replaced By
SIST EN 60034-9:2006 - Rotating electrical machines - Part 9: Noise limits (IEC 60034-9:2003, modified)
Effective Date
07-Jun-2022
Replaced By
SIST EN 60034-9:2006 - Rotating electrical machines - Part 9: Noise limits (IEC 60034-9:2003, modified)
Effective Date
29-Jan-2023
Replaces
SIST EN 60034-9:1993 - Rotating electrical machines -- Part 9: Noise limits
Effective Date
29-Jan-2023
Replaces
SIST EN 60034-9:1993/A1:1995 - Rotating electrical machines -- Part 9: Noise limits
Effective Date
29-Jan-2023
Replaces
SIST EN 60034-9:1993/A1:1995 - Rotating electrical machines -- Part 9: Noise limits
Effective Date
07-Jun-2022
Replaces
SIST EN 60034-9:1993 - Rotating electrical machines -- Part 9: Noise limits
Effective Date
07-Jun-2022

Buy Standard

EN 60034-9:1999EN 60034-9:1999
PreviousNext
Standard
EN 60034-9:1999
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60034-9:1999
01-april-1999
Rotating electrical machines - Part 9: Noise limits (IEC 60034-9:1997)
Rotating electrical machines -- Part 9: Noise limits
Drehende elektrische Maschinen -- Teil 9: Geräuschgrenzwerte
Machines électriques tournantes -- Partie 9: Limites de bruits
Ta slovenski standard je istoveten z: EN 60034-9:1997
ICS:
17.140.20 Emisija hrupa naprav in Noise emitted by machines
opreme and equipment
29.160.01 Rotacijski stroji na splošno Rotating machinery in
general
SIST EN 60034-9:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60034-9:1999

---------------------- Page: 2 ----------------------

SIST EN 60034-9:1999

---------------------- Page: 3 ----------------------

SIST EN 60034-9:1999

---------------------- Page: 4 ----------------------

SIST EN 60034-
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 60034-9:2006/A1:2007(Amendment)
Rotating electrical machines - Part 9: Noise limits (IEC 60034-9:2003/A1:2007)
EN 60034-9:2005/A1:2007
  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60034-9:2006(Main)
Rotating electrical machines - Part 9: Noise limits (IEC 60034-9:2003, modified)
EN 60034-9:2005

This part of IEC 60034:
– specifies test methods for the determination of sound power level of rotating electrical machines;
– specifies maximum A-weighted sound power levels for factory acceptance testing of rotating electrical machines in accordance with IEC 60034-1, having methods of cooling according to IEC 60034-6 and degrees of protection according to IEC 60034-5, and having the following characteristics:
• standard design, either a.c. or d.c., without additional special electrical, mechanical, or acoustical modifications intended to reduce the sound power level;
• rated output from 1 kW (or kVA) up to and including 5 500 kW (or kVA);
• speed not greater than 3 750 min−1.
Excluded are a.c. motors supplied by converters. For these conditions see IEC 60034-17 for guidance. The object of this standard is to determine maximum A-weighted sound power levels, LWA in decibels, dB, for airborne noise emitted by rotating electrical machines of standard design, as a function of power, speed and load, and to specify the method of measurement and the test conditions appropriate for the determination of the sound power level of the machines to provide a standardized evaluation of machine noise up to the maximum specified sound power levels. This standard does not provide correction for the existence of tonal characteristics.
Sound pressure levels at a distance from the machine may be required in some applications, such as hearing protection programs. Information is provided on such a procedure in Clause 7 based on a standardized test environment.
NOTE 1 This standard recognizes the economic reason for the availability of standard noise-level machines for use in non-critical areas or for use with supplementary means of noise attenuation.
NOTE 2 Where sound power levels lower than those specified in Tables 1 or 2 are required, these should be agreed between the manufacturer and the purchaser, as special electrical, mechanical, or acoustical design may involve additional measures.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
kSIST FprEN IEC 60034-9:2021(Main)
Rotating electrical machines - Part 9: Noise limits
FprEN IEC 60034-9:2021

IEC 60034-9:2021 specifies test methods for the determination of sound power level of rotating electrical machines and specifies maximum A-weighted sound power levels for factory acceptance testing of network-supplied, rotating electrical machines in accordance with lEC 60034-1, having methods of cooling according to lEC 60034-6 and degrees of protection according to lEC 60034-5, and having the following characteristics:
- standard design, either AC or DC, without additional special electrical, mechanical, or acoustical modifications intended to reduce the sound power level
- rated output from 1 kW (or kVA) up to and including 5 500 kW (or kVA)
- rated speed not greater than 3 750 min–1
This fifth edition cancels and replaces the fourth edition, published in 2003 and its amendment 1, published in 2007. This edition includes the following significant technical changes with respect to the previous edition:
a) In Table 2 and Table 3 cooling methods IC01, IC11, IC21 and IC31, IC71, IC81 are now covered.
b) This edition adds Table 3 for 60 Hz machines, whereas Table 2, which covers only 50 Hz machines, has no change in levels.
c) In Table 3, grade A is added to harmonize the highest levels seen in IEC and NEMA, whereas grade B was added to harmonize the lowest, more restrictive levels seen in IEC and NEMA.
d) The clause “Determination of noise increments caused by converter supply” has been shifted to Annex B and renamed “Information on typical noise increments caused by converter supply”.

  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 1680:2014(Main)
Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machines (ISO 1680:2013)
EN ISO 1680:2013

ISO 1680 specifies all the information necessary to carry out efficiently and under standardized conditions the determination, declaration, and verification of the noise emission characteristics of rotating electrical machines. It specifies noise measurement methods that can be used, and specifies the operating and mounting conditions required for the test. Noise emission characteristics include the sound power level and emission sound pressure level. The determination of these quantities is necessary: - for comparing the noise emitted by machines; - to enable manufacturers to declare the noise emitted; and - for the purposes of noise control. The use of this International Standard as a noise test code ensures the reproducibility of the determination of the noise emission characteristics within specified limits determined by the grade of accuracy of the basic noise measurement method used. Noise measurement methods allowed by this International Standard are precision methods (grade 1), engineering methods (grade 2) and survey methods (grade 3). Methods of engineering grade (grade 2) are to be preferred. This International Standard is applicable to rotating electrical machines of any length, width or height.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60034-9:2006/A1:2007(Amendment)
Rotating electrical machines - Part 9: Noise limits (IEC 60034-9:2003/A1:2007)
EN 60034-9:2005/A1:2007
  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60034-9:2006(Main)
Rotating electrical machines - Part 9: Noise limits (IEC 60034-9:2003, modified)
EN 60034-9:2005

This part of IEC 60034:
– specifies test methods for the determination of sound power level of rotating electrical machines;
– specifies maximum A-weighted sound power levels for factory acceptance testing of rotating electrical machines in accordance with IEC 60034-1, having methods of cooling according to IEC 60034-6 and degrees of protection according to IEC 60034-5, and having the following characteristics:
• standard design, either a.c. or d.c., without additional special electrical, mechanical, or acoustical modifications intended to reduce the sound power level;
• rated output from 1 kW (or kVA) up to and including 5 500 kW (or kVA);
• speed not greater than 3 750 min−1.
Excluded are a.c. motors supplied by converters. For these conditions see IEC 60034-17 for guidance. The object of this standard is to determine maximum A-weighted sound power levels, LWA in decibels, dB, for airborne noise emitted by rotating electrical machines of standard design, as a function of power, speed and load, and to specify the method of measurement and the test conditions appropriate for the determination of the sound power level of the machines to provide a standardized evaluation of machine noise up to the maximum specified sound power levels. This standard does not provide correction for the existence of tonal characteristics.
Sound pressure levels at a distance from the machine may be required in some applications, such as hearing protection programs. Information is provided on such a procedure in Clause 7 based on a standardized test environment.
NOTE 1 This standard recognizes the economic reason for the availability of standard noise-level machines for use in non-critical areas or for use with supplementary means of noise attenuation.
NOTE 2 Where sound power levels lower than those specified in Tables 1 or 2 are required, these should be agreed between the manufacturer and the purchaser, as special electrical, mechanical, or acoustical design may involve additional measures.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
kSIST FprEN IEC 60034-9:2021(Main)
Rotating electrical machines - Part 9: Noise limits
FprEN IEC 60034-9:2021

IEC 60034-9:2021 specifies test methods for the determination of sound power level of rotating electrical machines and specifies maximum A-weighted sound power levels for factory acceptance testing of network-supplied, rotating electrical machines in accordance with lEC 60034-1, having methods of cooling according to lEC 60034-6 and degrees of protection according to lEC 60034-5, and having the following characteristics:
- standard design, either AC or DC, without additional special electrical, mechanical, or acoustical modifications intended to reduce the sound power level
- rated output from 1 kW (or kVA) up to and including 5 500 kW (or kVA)
- rated speed not greater than 3 750 min–1
This fifth edition cancels and replaces the fourth edition, published in 2003 and its amendment 1, published in 2007. This edition includes the following significant technical changes with respect to the previous edition:
a) In Table 2 and Table 3 cooling methods IC01, IC11, IC21 and IC31, IC71, IC81 are now covered.
b) This edition adds Table 3 for 60 Hz machines, whereas Table 2, which covers only 50 Hz machines, has no change in levels.
c) In Table 3, grade A is added to harmonize the highest levels seen in IEC and NEMA, whereas grade B was added to harmonize the lowest, more restrictive levels seen in IEC and NEMA.
d) The clause “Determination of noise increments caused by converter supply” has been shifted to Annex B and renamed “Information on typical noise increments caused by converter supply”.

  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 12349:2023(Main)
Mechanical vibration - Guide to the health effects of vibration on the human body
CEN/TR 12349:2023

The aim of this CEN report is to provide information on the possible adverse health effects caused by exposure to vibration at work.  the report addresses manufacturers as well as employers and employees using vibrating machinery in order to improve their understanding of the possible health problems arising from occupational exposure to vibration.

  • Technical report
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 80004-1:2023(Main)
Nanotechnologies - Vocabulary - Part 1: Core vocabulary (ISO 80004-1:2023)
EN ISO 80004-1:2023

This document defines core terms in the field of nanotechnology. This document is intended to facilitate communication between organizations and individuals in industry and those who interact with them.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3262-4:2023(Main)
Extenders - Specifications and methods of test - Part 4: Whiting (ISO 3262-4:2022)
EN ISO 3262-4:2023

This document specifies requirements and corresponding methods of test for whiting.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day