iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO 5492:2009/A1:2017

(Amendment)

Sensory analysis - Vocabulary - Amendment 1 (ISO 5492:2008/Amd 1:2016)

Sensory analysis - Vocabulary - Amendment 1 (ISO 5492:2008/Amd 1:2016)

Sensorische Analyse - Vokabular - Änderung 1 (ISO 5492:2008/Amd 1:2016)

Analyse sensorielle - Vocabulaire - Amendement 1 (ISO 5492:2008/Amd 1:2016)

Senzorična analiza - Slovar - Dopolnilo A1 (ISO 5492:2008/Amd 1:2016)

General Information

Status
Published
Public Enquiry End Date
30-Dec-2014
Publication Date
20-Feb-2017
ICS
01.040.67 - Food technology (Vocabularies)
67.240 - Sensory analysis
Technical Committee
KŽP - Agricultural food products
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
27-Jan-2017
Due Date
03-Apr-2017
Completion Date
21-Feb-2017
Ref Project
EN ISO 5492:2009/A1:2017 - Sensory analysis - Vocabulary - Amendment 1 (ISO 5492:2008/Amd 1:2016)

Relations

Amends
SIST EN ISO 5492:2009 - Sensory analysis - Vocabulary (ISO 5492:2008)
Effective Date
01-Mar-2017

Buy Standard

EN ISO 5492:2009/A1:2017EN ISO 5492:2009/A1:2017
PreviousNext
Amendment
EN ISO 5492:2009/A1:2017
English, French, German and Russian language
29 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 5492:2009/A1:2017
01-marec-2017
6HQ]RULþQDDQDOL]D6ORYDU'RSROQLOR$ ,62$PG
Sensory analysis - Vocabulary - Amendment 1 (ISO 5492:2008/Amd 1:2016)
Sensorische Analyse - Vokabular - Änderung 1 (ISO 5492:2008/Amd 1:2016)
Analyse sensorielle - Vocabulaire - Amendement 1 (ISO 5492:2008/Amd 1:2016)
Ta slovenski standard je istoveten z: EN ISO 5492:2009/A1:2017
ICS:
01.040.67 Živilska tehnologija (Slovarji) Food technology
(Vocabularies)
67.240 6HQ]RULþQDDQDOL]D Sensory analysis
SIST EN ISO 5492:2009/A1:2017 en,fr,de,ru
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 5492:2009/A1:2017

---------------------- Page: 2 ----------------------

SIST EN ISO 5492:2009/A1:2017


EN ISO 5492:2009/A1
EUROPEAN STANDARD

NORME EUROPÉENNE

January 2017
EUROPÄISCHE NORM
ICS 01.040.67; 67.240
English Version

Sensory analysis - Vocabulary - Amendment 1 (ISO
5492:2008/Amd 1:2016)
Analyse sensorielle - Vocabulaire - Amendement 1 (ISO Sensorische Analyse - Vokabular - Änderung 1 (ISO
5492:2008/Amd 1:2016) 5492:2008/Amd 1:2016)
This amendment A1 modifies the European Standard EN ISO 5492:2009; it was approved by CEN on 30 October 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5492:2009/A1:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 5492:2009/A1:2017
EN ISO 5492:2009/A1:2017 (E)
Contents Page
European foreword . 3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 5492:2009/A1:2017
EN ISO 5492:2009/A1:2017 (E)
European foreword
This document (EN ISO 5492:2009/A1:2017) has been prepared by Technical Committee ISO/TC 34
"Food products".
This Amendment to the European Standard EN ISO 5492:2009 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by July 2017, and
conflicting national standards shall be withdrawn at the latest by July 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 5492:2008/Amd 1:2016 has been approved by CEN as EN ISO 5492:2009/A1:2017
without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 5492:2009/A1:2017

---------------------- Page: 6 ----------------------

SIST EN ISO 5492:2009/A1:2017
INTERNATIONAL ISO
STANDARD 5492
Second edition
Deuxième édition
NORME
Второе издание
2008-10-15
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
ИЗМЕНЕНИЕ 1
2016-12-15
МЕЖДУНАРОДНЫЙ
СТАНДАРТ
Sensory analysis — Vocabulary
AMENDMENT 1
Analyse sensorielle — Vocabulaire
AMENDEMENT 1
Сенсорный анализ — Словарь
ИЗМЕНЕНИЕ 1
Sensorische A
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 5492:2009(Main)
Sensory analysis - Vocabulary (ISO 5492:2008)
EN ISO 5492:2009

This International Standard defines terms relating to sensory analysis. It applies to all industries concerned with the evaluation of products by the sense organs. The terms are given under the following headings: 1) general terminology; 2) terminology relating to the senses; 3) terminology relating to organoleptic attributes; 4) terminology relating to methods.

  • Standard
    121 pages
    English, French, German and Russian language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 5492:2009(Main)
Sensory analysis - Vocabulary (ISO 5492:2008)
EN ISO 5492:2009

This International Standard defines terms relating to sensory analysis. It applies to all industries concerned with the evaluation of products by the sense organs. The terms are given under the following headings: 1) general terminology; 2) terminology relating to the senses; 3) terminology relating to organoleptic attributes; 4) terminology relating to methods.

  • Standard
    121 pages
    English, French, German and Russian language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62841-4-6:2024/A11:2024(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-6: Particular requirements for garden blowers, garden vacuums and garden blower/vacuums
EN IEC 62841-4-6:2024/A11:2024

2021-05-14: This prAA includes CMs to EN IEC (PR=72116), both PRs to be circulated simultaneously
D164/C043: DOW=DOR+48 months

  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50726-1:2024(Main)
Emergency and danger systems - Part 1: Emergency and danger response systems (EDRS) - Basic requirements, duties, responsibilities and activities
EN 50726-1:2024

This document applies to the planning, installation, commissioning, operation and maintenance of an emergency and danger response system. An emergency and danger response system is part of an overall solution for dealing with specific events such as emergencies or crises.
This document
-   specifies:
-   technical processes and responsibilities for supporting all procedures from the registration of an event (emergency, danger) up to its final processing;
-   the technical risk management including the definition of safety/security goals and the workflow organization as well as the necessary specifications regarding a technical risk management file;
-   associated duties, responsibilities and activities as parts of an integrated overall risk management process to achieve the safety and security goals, effectiveness and efficiency as well as data and system safety/security;
-   three different grades of safety/security, with the respective product functionalities required to achieve them;
-   the basic requirements for emergency and danger response systems (EDRS) in public buildings such as education facilities (e.g. schools, universities), government facilities, kindergartens and similar facilities;
-   the responsibilities under applicable national law about Safety and Health at Work Laws and thus particularly addresses the responsibility of employers;
-   describes:
-   the process of establishing, maintaining and updating a risk management file in which, inter alia, the technical risks are listed and evaluated and the residual technical risks are defined, resulting in the grade and structure of the EDRS;
-   is intended to support the implementation of:
-   National legal and other provisions (e.g. Act on Equal Opportunities for People with Disabilities, Safety and Health at Work Laws, education laws);
-   gives relevant guidance on:
-   the organizational risk management;
-   does not replace the specifications of standards to the following systems:
-   fire safety systems including, but not limited to, fire detection and fire alarm systems, fixed firefighting systems, smoke and heat control systems,
-   security systems including, but not limited to, intrusion and hold-up alarm systems, electronic access control systems, external perimeter security systems and video surveillance systems,
-   applicable national standards on call systems.
All such systems can, however, be integrated into an emergency and danger response system (EDRS), taking into account the relevant provisions made in the respective standards for such products and systems.
Other products and systems from the entire field of standardization, such as alarm systems, danger warning and danger alarm systems, escape routing systems, public address systems used to respond to a danger, can also be used in or integrated into an emergency and danger response system if the relevant requirements of the standards for such products or systems are met.
This document does not specify any risk levels, in particular no acceptable residual risks. Technical risk management and organizational risk management are equal parts of the overall risk management.
This document is also applicable to non-public buildings with a similar risk and requirement for protection.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50528:2024(Main)
Insulating ladders for use on or near low voltage electrical installations
EN 50528:2024

This document is applicable to portable ladders made only of non-conductive stiles, including accessories (pole leaning device, adjustable levelling device, adjustable ladder stabilizer, etc.) used to work on or near electrical systems and installations in the low voltage range (up to 1 000 V AC/1 500 V DC.).
These ladders are used, to provide temporary access, generally on overhead line structures and to undertake electrical operations. They are intended to be used by one person only.
These ladders, in conjunction with other protective equipment provide sufficient insulation level to protect against inadvertent contact with live low voltage installations.
This document does not cover ladders used for live working on electrical installations at voltages above 1 000 V AC and above 1 500 V DC. These insulating ladders are separately covered by EN 61478.
This document does not cover products not made entirely with non-conductive stiles generally called mixed ladders. In this case EN 131 series apply.
This document does not cover step stools which are covered by EN 14183.
These ladders are only for professional use. Only skill persons, after an appropriate training can use this type of ladder for professional applications.
The products designed and manufactured according to this document contribute to the safety of the users provided they are used by skilled persons, in accordance with safe methods of work and the instructions for use (where appropriate).

  • Standard
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1751:2024(Main)
Ventilation for buildings - Air terminal devices - Aerodynamic testing of damper and valves
EN 1751:2024

This document specifies methods for the testing and rating of dampers and valves used in air distribution systems with pressure differences up to 2 000 Pa.
The tests incorporated in this document will address:
-   leakage past a closed damper or valve (for classification see Annex C);
-   casing leakage (for classification see Annex C);
-   flow rate/pressure requirement characteristics;
-   torque: (see Annex A);
-   thermal transmittance: (see Annex B).
The acoustic testing of dampers and valves is not included in this document. The tests specified above apply to the following:
-   measurement of leakage past a closed damper or valve;
-   measurement of casing leakage;
-   determination of flow rate and pressure requirements;
-   measurement of torque characteristics (see Annex A);
-   measurement of thermal transfer characteristics to determine insulation properties (see Annex B).
NOTE   Certain aspects of the dynamic performance of dampers and/or valves are dependent upon the air distribution system to which they are connected and are, therefore, difficult to measure in isolation. Such considerations have led to the omission of these aspects of the dynamic performance measurements from this document. Also, in common with other air distribution components, the results from tests carried out in accordance with this document may not be directly applicable if the damper or valve is situated in an area of non-uniform flow.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13557:2024(Main)
Cranes - Controls and control stations
EN 13557:2024

This document specifies health and safety design requirements for control devices and control stations for all types of cranes.
Specific requirements for particular types of crane are given in the appropriate European standard for the particular crane type.
Control systems are covered by other standards, e.g. EN 60204-32:2008 and EN 13135:2013+A1:2018.
This document does not deal with noise hazards because these are dealt with in safety standards for specific types of cranes. It also does not address the design of the cabin with regard to its sound insulation properties.
This document covers specific hazards, which could occur during the use of control devices and control stations. It does not cover hazards, which could occur during transport, construction, modification, de-commissioning or disposal. The hazards covered by this standard are identified in Clause 4.
This document is applicable after the date of approval by CEN of this standard.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 6806:2024(Main)
Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:2024)
EN ISO 6806:2024

ISO 6806:2017 specifies the minimum requirements for rubber hoses and hose assemblies for use in oil burners.
The following two types of hose assembly are specified.
- Type 1: Hose assemblies for flux and reflux, but not for insertion between the oil burner pump and the atomizing connection; maximum working pressure 1,0 MPa (10 bar); maximum oil temperature 100 °C.
- Type 2: Hose assemblies for insertion between the oil burner pump and the atomizing connection; maximum working pressure 4,0 MPa (40 bar); maximum oil temperature 100 °C.
The hose assemblies specified in this document are not intended to be used, without special assessment, for purposes other than oil burner installations.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 12183:2024(Main)
Nuclear fuel technology - Controlled-potential coulometric measurement of plutonium (ISO 12183:2024)
EN ISO 12183:2024

ISO 12183:2016 describes an analytical method for the electrochemical assay of pure plutonium nitrate solutions of nuclear grade, with a total uncertainty not exceeding ±0,2 % at the confidence level of 0,95 for a single determination (coverage factor, K = 2). The method is suitable for aqueous solutions containing more than 0,5 g/L plutonium and test samples containing between 4 mg and 15 mg of plutonium. Application of this technique to solutions containing less than 0,5 g/L and test samples containing less than 4 mg of plutonium requires experimental demonstration by the user that applicable data quality objectives will be met.
For some applications, purification of test samples by anion exchange is required before measurement to remove interfering substances when present in significant amounts.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17134-1:2024(Main)
Textiles and textile products - Determination of biocide additives - Part 1: 2-Phenylphenol and triclosan, method using liquid chromatography
EN 17134-1:2024

This document specifies a test method for the determination of the content of the preservative agents (biocidal products) 2-phenylphenol (OPP) and triclosan in textile materials and articles composed of textile products, by liquid chromatography.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day