SIST EN ISO 4172:2024
(Main)Technical product documentation (TPD) - Construction documentation - Drawings for the assembly of prefabricated structures (ISO 4172:2024)
Technical product documentation (TPD) - Construction documentation - Drawings for the assembly of prefabricated structures (ISO 4172:2024)
This second edition cancels and replaces the first edition (ISO 4172 :1981), clause 2 and subclause 4.3 of which have been technically revised. Specifies general rules for the preparation of working drawings intended for the field assembly of prefabricated structures for building and civil engineering works. Gives normative references, definitions, documentation, designation of prefabricated structural components.
Technische Produktdokumentation (TPD) - Baukonstruktionszeichnungen - Zeichnungen für den Zusammenbau vorgefertigter Teile (ISO 4172:2024)
Diese Internationale Norm legt allgemeine Regeln für die Erstellung von Zeichnungen für den Zusammenbau vorgefertigter Teile im Bauwesen fest.
Documentation technique de produits (DTP) - Documentation de construction - Dessins d'assemblage des structures préfabriquées (ISO 4172:2024)
Le présent document spécifie les exigences générales pour la préparation des dessins de construction destinés au domaine de l’assemblage des structures préfabriquées pour le bâtiment et les ouvrages de génie civil.
Tehnična dokumentacija izdelkov - Gradbena dokumentacija - Sestavne risbe montažnih konstrukcij (ISO 4172:2024)
General Information
Relations
Buy Standard
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 4172:2024
01-junij-2024
Nadomešča:
SIST EN ISO 4172:1998
Tehnična dokumentacija izdelkov - Gradbena dokumentacija - Sestavne risbe
montažnih konstrukcij (ISO 4172:2024)
Technical product documentation (TPD) - Construction documentation - Drawings for the
assembly of prefabricated structures (ISO 4172:2024)
Technische Produktdokumentation (TPD) - Baukonstruktionszeichnungen - Zeichnungen
für den Zusammenbau vorgefertigter Teile (ISO 4172:2024)
Documentation technique de produits (DTP) - Documentation de construction - Dessins
d'assemblage des structures préfabriquées (ISO 4172:2024)
Ta slovenski standard je istoveten z: EN ISO 4172:2024
ICS:
01.100.30 Gradbeni načrti Construction drawings
SIST EN ISO 4172:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 4172:2024
---------------------- Page: 2 ----------------------
SIST EN ISO 4172:2024
EN ISO 4172
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2024
EUROPÄISCHE NORM
ICS 01.100.30 Supersedes EN ISO 4172:1996
English Version
Technical product documentation (TPD) - Construction
documentation - Drawings for the assembly of
prefabricated structures (ISO 4172:2024)
Documentation technique de produits (DTP) - Technische Produktdokumentation (TPD) -
Documentation de construction - Dessins d'assemblage Baukonstruktionszeichnungen - Zeichnungen für den
des structures préfabriquées (ISO 4172:2024) Zusammenbau vorgefertigter Teile (ISO 4172:2024)
This European Standard was approved by CEN on 13 March 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4172:2024 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 4172:2024
EN ISO 4172:2024 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 4172:2024
EN ISO 4172:2024 (E)
European foreword
This document (EN ISO 4172:2024) has been prepared by Technical Committee ISO/TC 10 "Technical
product documentation" in collaboration with CCMC.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2024, and conflicting national standards
shall be withdrawn at the latest by September 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 4172:1996.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 4172:2024 has been approved by CEN as EN ISO 4172:2024 without any modification.
3
------
...
SLOVENSKI STANDARD
SIST EN ISO 4172:2024
01-junij-2024
Nadomešča:
SIST EN ISO 4172:1998
Tehnična dokumentacija izdelkov - Gradbena dokumentacija - Sestavne risbe
montažnih konstrukcij (ISO 4172:2024)
Technical product documentation (TPD) - Construction documentation - Drawings for the
assembly of prefabricated structures (ISO 4172:2024)
Technische Produktdokumentation (TPD) - Baukonstruktionszeichnungen - Zeichnungen
für den Zusammenbau vorgefertigter Teile (ISO 4172:2024)
Documentation technique de produits (DTP) - Documentation de construction - Dessins
d'assemblage des structures préfabriquées (ISO 4172:2024)
Ta slovenski standard je istoveten z: EN ISO 4172:2024
ICS:
01.100.30 Gradbeni načrti Construction drawings
01.110 Tehnična dokumentacija za Technical product
izdelke documentation
SIST EN ISO 4172:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 4172:2024
---------------------- Page: 2 ----------------------
SIST EN ISO 4172:2024
EN ISO 4172
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2024
EUROPÄISCHE NORM
ICS 01.100.30 Supersedes EN ISO 4172:1996
English Version
Technical product documentation (TPD) - Construction
documentation - Drawings for the assembly of
prefabricated structures (ISO 4172:2024)
Documentation technique de produits (DTP) - Technische Produktdokumentation (TPD) -
Documentation de construction - Dessins d'assemblage Baukonstruktionszeichnungen - Zeichnungen für den
des structures préfabriquées (ISO 4172:2024) Zusammenbau vorgefertigter Teile (ISO 4172:2024)
This European Standard was approved by CEN on 13 March 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4172:2024 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 4172:2024
EN ISO 4172:2024 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 4172:2024
EN ISO 4172:2024 (E)
European foreword
This document (EN ISO 4172:2024) has been prepared by Technical Committee ISO/TC 10 "Technical
product documentation" in collaboration with CCMC.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2024, and conflicting national standards
shall be withdrawn at the latest by September 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 4172:1996.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 4172:2024 has been appr
...
SLOVENSKI STANDARD
oSIST prEN ISO 4172:2023
01-april-2023
Tehnična dokumentacija izdelkov - Gradbena dokumentacija - Sestavne risbe
montažnih konstrukcij (ISO/DIS 4172:2023)
Technical product documentation (TPD) - Construction documentation - Drawings for the
assembly of prefabricated structures (ISO/DIS 4172:2023)
Technische Zeichnungen - Baukonstruktionszeichnungen - Zeichnungen für den
Zusammenbau vorgefertigter Teile (ISO/DIS 4172:2023)
Dessins techniques - Dessins de construction - Dessins d'assemblage des structures
préfabriquées (ISO/DIS 4172:2023)
Ta slovenski standard je istoveten z: prEN ISO 4172
ICS:
01.100.30 Gradbeni načrti Construction drawings
oSIST prEN ISO 4172:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 4172:2023
---------------------- Page: 2 ----------------------
oSIST prEN ISO 4172:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 4172
ISO/TC 10/SC 8 Secretariat: SIS
Voting begins on: Voting terminates on:
2023-01-31 2023-04-25
Technical product documentation (TPD) — Construction
documentation — Drawings for the assembly of
prefabricated structures
ICS: 01.100.30
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 4172:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
---------------------- Page: 3 ----------------------
oSIST prEN ISO 4172:2023
ISO/DIS 4172:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 4172
ISO/TC 10/SC 8 Secretariat: SIS
Voting begins on: Voting terminates on:
Technical product documentation (TPD) — Construction
documentation — Drawings for the assembly of
prefabricated structures
ICS: 01.100.30
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 4172:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
© ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
---------------------- Page: 4 ----------------------
oSIST prEN ISO 4172:2023
ISO/DIS 4172:2022(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definit
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.