SIST EN 14991:2007
(Main)Precast concrete products - Foundation elements
Precast concrete products - Foundation elements
This European Standard deals with the requirements and the basic performance criteria and specifies where applicable minimum values for precast foundation elements (comprising columns with integrated foundation elements, pocket foundation elements, sockets) made of reinforced normal weight concrete for structure of buildings according to EN 1992-1-1.
This European Standard covers terminology, performance criteria, tolerances, relevant physical properties and special aspects of transport and erection.
This European Standard does not cover the bearing capacity determined by testing.
Betonfertigteile - Gründungselemente
Diese Europäische Norm behandelt die Anforderungen und grundlegenden Leistungskriterien für Fertigbauteile aus bewehrtem Normalbeton für Gründungen (d. h. Stütze mit angeformtem Fundamentkörper, Köcher(Hülsen)fundamente, Köcher (Hülsen) für Tragwerke nach EN 1992 1 1 und legt die entsprechenden Mindestwerte fest.
Diese Europäische Norm beinhaltet Terminologie, Leistungskriterien, Toleranzen, relevante physikalische Eigenschaften und besondere Aspekte von Transport und Montage.
Die durch Prüfungen ermittelte Tragfähigkeit ist nicht Gegenstand dieser Europäischen Norm.
Produits préfabriqués en béton - Éléments de fondation
La présente Norme européenne traite des exigences et des criteres de performance de base et spécifie le cas échéant les valeurs minimales pour les éléments de fondation préfabriqués (comprenant les plots de fondation a encuvement, les poteaux a fondation intégrée et les butées) en béton armé de granulats courants, conformément a l'EN 1992-1-1.
La présente Norme européenne couvre la terminologie, les criteres de performance, les tolérances, les propriétés physiques pertinentes, ainsi que les aspects particuliers du transport et du montage.
Elle ne couvre pas la résistance déterminée par les essais.
Montažni betonski izdelki - Elementi za temeljenje
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Precast concrete products - Foundation elementsMontažni betonski izdelki - Elementi za temeljenjeProduits préfabriqués en béton - Éléments de fondationBetonfertigteile - GründungselementeTa slovenski standard je istoveten z:EN 14991:2007SIST EN 14991:2007en;fr;de93.020Zemeljska dela. Izkopavanja. Gradnja temeljev. Dela pod zemljoEarthworks. Excavations. Foundation construction. Underground works91.100.30Beton in betonski izdelkiConcrete and concrete productsICS:SLOVENSKI
STANDARDSIST EN 14991:200701-julij-2007
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14991April 2007ICS 91.100.30 English VersionPrecast concrete products - Foundation elementsProduits préfabriqués en béton - Éléments de fondationBetonfertigteile - GründungselementeThis European Standard was approved by CEN on 13 January 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14991:2007: E
EN 14991:2007 (E) 2 Contents Page The numbering of clauses is strictly related to EN 13369:2004 Common rules for precast concrete products, at least for the first three digits. When a clause of EN 13369 is not relevant or included in a more general reference of this standard, its number is omitted and this may result in a gap on numbering. Foreword.3 Introduction.5 1 Scope.6 2 Normative references.6 3 Terms and definitions.6 4 Requirements.7 5 Test methods.8 6 Evaluation of conformity.8 7 Marking.9 8 Technical documentation.9 Annex A (normative)
Inspection schemes.10 Annex B (informative)
Typical shapes of foundation elements.11 Annex Y (informative)
Choice of CE marking method.17 Annex ZA (informative)
Clauses of this European Standard addressing the provisions of the EU Construction Products Directive.18 Bibliography.27
EN 14991:2007 (E) 3 Foreword This document (EN 14991:2007) has been prepared by Technical Committee CEN/TC 229 “Precast concrete products”, the secretariat of which is held by AFNOR and was examined by and agreed with a joint working party appointed by the Liaison Group CEN/TC 229-TC250, particularly for its compatibility with structural Eurocodes. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2007, and conflicting national standards shall be withdrawn at the latest by January 2009. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Construction Products Directives (89/106/EEC). For relationship with EU Directives, see informative Annex ZA, which is an integral part of this document. This standard is one of a series of product standards for precast concrete products. For common aspects reference is made to EN 13369: Common rules for precast concrete products, from which also the relevant requirements of the EN 206-1: Concrete — Part 1: Specification, performance, production and conformity are taken. The references to EN 13369 by CEN/TC 229 product standards are intended to make them homogeneous and to avoid repetitions of similar requirements. Eurocodes are taken as a common reference for design aspects. The installation of some structural precast concrete products is dealt with by ENV 13670-1: Execution of concrete structures — Part 1: Common rules, which has at the moment the status of an European prestandard. In all countries it can be accompanied by alternatives for national application and it shall not be treated as a European Standard. The programme of standards for structural precast concrete products comprises the following standards, in some cases consisting on several parts: EN 1168, Precast concrete products — Hollow core slabs EN 12794, Precast concrete products — Foundation piles EN 12843, Precast concrete products — Masts and poles EN 13747, Precast concrete products — Floor plates for floor systems EN 15037 (all parts), Precast concrete products —– Beams for beam-and-block floor systems EN 13224, Precast concrete products — Ribbed floor elements EN 13225, Precast concrete products — Linear structural elements EN 14992, Precast concrete products — Wall elements EN 15258, Precast concrete products — Retaining wall elements EN 13693, Precast concrete products — Special roof elements
EN 14991:2007 (E) 4 EN 14844, Precast concrete products — Box culverts EN 13978-1, Precast concrete products — Precast concrete garages —- Part 1: Requirements for reinforced garages monolithic or consisting of single sections with room dimensions EN 14991, Precast concrete products — Foundation elements EN 15050, Precast concrete products — Bridge elements EN 14843, Precast concrete products — Stairs This European Standard defines in Annex ZA the application methods of CE marking to products designed using the relevant EN Eurocodes (EN 1992-1-1 and EN 1992-1-2). Where, in default of applicability conditions of EN Eurocodes to the works of destination, design provisions other than EN Eurocodes are used for mechanical strength, the conditions to affix CE marking to the product are described in ZA.3.5. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EN 14991:2007 (E) 5 Introduction The evaluation of conformity given in this European Standard refers to the completed precast elements which are supplied to the market and covers all the production operations carried out in the factory. For design rules reference is made to EN 1992-1-1. Additional complementary rules are provided where necessary.
EN 14991:2007 (E) 6 1 Scope This European Standard deals with the requirements and the basic performance criteria and specifies where applicable minimum values for precast foundation elements (comprising columns with integrated foundation elements, pocket foundation elements, sockets) made of reinforced normal weight concrete for structure of buildings according to EN 1992-1-1. This European Standard covers terminology, performance criteria, tolerances, relevant physical properties and special aspects of transport and erection. This European Standard does not cover the bearing capacity determined by testing. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1992-1-1:2004, Eurocode 2: Design of concrete structures — Part 1-1: General rules and rules for buildings EN 1997-1:2004, Eurocode 7: Geotechnical design — Part 1: General rules EN 13369:2004, Common rules for precast concrete products 3 Terms and definitions For the purpose of this document, the terms and definitions given in Clause 3 of EN 13369:2004 and the following apply. 3.1 pocket foundation element precast reinforced concrete unit capable of transferring vertical actions, bending moments and horizontal shears from structural components of the structure (e.g. columns, foundation beams, walls) to the soil (see Figures B.2 to B.4) 3.2 column with integrated foundation element precast foundation element forming part of a column and permanently fixed to it 3.3 socket either vertical part of a pocket foundation element (see Figures B.3 and B.4) or separate precast unit corresponding to that part (see Figure B.1) 3.4 footing horizontal part of the pocket foundation element NOTE It can either be a part of a pocket unit or be cast on site. 3.5 pocket with keyed surfaces pocket expressly wrought with indentations or keys at the vertical internal surfaces of the socket
EN 14991:2007 (E) 7 3.6 pocket with smooth surfaces pocket with the internal surfaces of its socket smooth as cast 3.7 product family group of foundation elements of the same type and shape, with the same critical dimensions and manufactured with the same type of concrete (type of concrete: see EN 13369:2004, 3.1.8) 4 Requirements 4.1 Material requirements 4.1 of EN 13369:2004 shall apply except that 4.1.4 is not relevant. 4.2 Production requirements 4.2.1 Concrete production 4.2.1 of EN 13369:2004 shall apply. 4.2.2 Hardened concrete 4.2.2 of EN 13369:2004 shall apply. 4.2.3 Structural reinforcement 4.2.3 of EN 13369:2004 shall apply except that 4.2.3.2 is not relevant. 4.3 Finished product requirements 4.3.1 Geometrical properties 4.3.1.1 Production tolerances 4.3.1.1 of EN 13369:2004 shall apply. 4.3.1.2 Minimum nominal dimensions 4.3.1.2 of EN 13369:2004 shall apply. 4.3.2 Surface characteristics 4.3.2 of EN 13369:2004 shall apply.
EN 14991:2007 (E) 8 4.3.3 Mechanical resistance 4.3.3.1 General 4.3.3.1 of EN 13369:2004 shall apply. 4.3.3.2 Verification by calculation 4.3.3.2 of EN 13369:2004, 10.9.6 of EN 1992-1-1:2004 and 6 of EN 1997-1:2004 shall apply. Interactions with soil irregularities shall be checked. 4.3.3.3 Resistance to vertical load and bending moment 10.9.6 of EN 1992-1-1:2004 and Clause 6 of EN 1997-1:2004 shall apply. 4.3.3.4 Verification by calculation aided by physical testing 4.3.3.3 of EN 13369:2004 shall apply. 4.3.3.5 Safety factors 4.3.3.5 of EN 13369:2004 shall apply. 4.3.3.6 Transient situations 4.3.3.6 of EN 13369:2004 shall apply. 4.3.7 Durability 4.3.7 of EN 13369:2004 shall apply. 4.3.8 Other requirements 4.3.8 of EN 13369:2004 shall apply. 5 Test methods Clause 5 of EN 13369:2004 shall apply. 6 Evaluation of conformity 6.1 General Compliance of the product with the requirements of this European Standard shall be demonstrated by: initial type testing; factory production control. 6.1 of EN 13369:2004 shall apply.
EN 14991:2007 (E) 9 6.2 Type testing 6.2 of EN 13369:2004 shall apply. Previous type tests (or tests) executed before the application of the present standard may be used as type tests provided they are related to the same product family with the same or equivalent or more demanding test method. 6.3 Factory production control 6.3 of EN 13369:2004 shall apply. Inspection schemes shall be conducted in an accordance with Annex A of the present standard and EN 13369:2004, Annexes D.1 to D.3, D.4 as amended in Annex A and D.5. 7 Marking Clause 7 of EN 13369:2004 shall apply. NOTE For CE marking see Annex ZA. 8 Technical documentation The detailing of the element, referred to geometrical data with the complementary properties of materials and inserts, shall be given in technical documentation, which includes the construction data, such as the dimensions, the tolerances, the layout of reinforcement, the concrete cover, the expected transient and final support conditions and lifting conditions. The composition of technical documentation is given in clause 8 of EN 13369:2004.
EN 14991:2007 (E) 10 Annex A (normative)
Inspection schemes A.1 Finished product inspection The Table A.1 replaces item 2 of Table D.4 of EN 13369:2004. Table A.1 — Finished product inspection
Subject Method Purpose Frequency Product Testing 2a Critical dimensions Measuring according to 5.2 of EN 13369:2004 Conformity with the requirements of this standard and with the design specification One product / family / 5 production days One product/production day 2b Internal surface characteristics in case of pockets with keyed surfaces Visual inspection Roughness for shear resistance As for critical dimensions If treated after production: 1 element/roughening process/production day
EN 14991:2007 (E) 11 Annex B (informative)
Typical shapes of foundation elements B.1 Typology Precast concrete foundation elements dealt with in this European Standard can be distinguished in some principal types according to the following criteria: a) sockets constituting separate units (see Figure B.1); b) pocket foundation elements: without footing (see Figure B.2); with footing: with or without gentle slope (see Figure B.3); with stiffeners (see Figure B.4); c) columns with integrated foundation elements (see Figure B.5).
EN 14991:2007 (E) 12
a) for concrete column, with chamferred edges b) for concrete column, with straight edges Key 1 concrete column 2 reinforcement protruding from the socket 3 cast on site footing
c) for steel column Key 1 steel column 2 precast concrete socket 3 hole for steel bar 4 steel bar Figure B.1 — Examples of sockets
EN 14991:2007 (E) 13
Key 1 concrete column Figure B.2 — Example of pocket foundation without footing
a) for concrete column, with parallelepiped footing b) for concrete column, with footing with gentle slope Key 1 concrete column 3 footing 2 socket 4 gentle slope
EN 14991:2007 (E) 14
c) for steel column and concrete foundation beams Key 1 steel loop 4 holes for steel bars 2 internal stiffener 5 footing with gentle slope 3 encasing
d) for wall Key 1 gap for the wall 3 footing with gentle slope 2 socket
Figure B.3 — Examples of pocket foundations with footing
EN 14991:2007 (E) 15
a1) for concrete column (without stiffener) a2) for concrete column (with stiffeners)
Key 1 precast column 2 socket 3 stiffener 4 footing
b) for concrete foundation beams Key 1 foundation beams 2 stiffeners
EN 14991:2007 (E) 16
c) other example of application Key 1 foundation beam 2 stiffeners Figure B.4 — Further examples of pocket foundations with footing
Figure B.5 — Example of column with integrated foundation element
EN 14991:2007 (E) 17 Annex Y (informative)
Choice of CE marking method Y.1 General The producer should choose to apply, for CE marking, one of the methods described in ZA.3, on the basis of the following conditions. Y.2 Method 1 The declaration of geometrical data and material properties as specified in ZA.3.2 may be applied when the following condition occurs: off the shelf and catalogue products. Y.3 Method 2 The declaration of product properties determined following this standard and EN Eurocodes, as specified in ZA.3.3, should be applied when the following condition occurs: precast product with product properties declared by the producer. Y.4 Method 3 The declaration of compliance with a given specification as specified in ZA.3.4 may be applied when the following condition occurs: all other cases than Y.2 and Y.3.
EN 14991:2007 (E) 18 Annex ZA (informative)
Clauses of this European Standard addressing the provisions of the EU Construction Products Directive ZA.1 Scope and relevant characteristics This European standard has been prepared under the mandate M/100 "Precast Concrete Products"1 given to CEN by the European Commission and the European Free Trade Association. The clauses of this European standard shown in this Annex meet the requirements of the mandate given under the EU Construction Products Directive (89/106/EEC). Compliance with these clauses confers a presumption of fitness of the foundation elements covered by this annex for the intended uses indicated herein; reference shall be made to the information accompanying the CE marking. WARNING — Other requirements and other EU Directive
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.