oSIST prEN 16662-2:2023

Road vehicles - Supplementary grip devices for tyres of passenger cars and light duty vehicles - Part 2: Specific test procedures

This document defines the specific test procedures for different type of SGDs: metallic, textile fabric, non-metallic net and hybrid.

Straßenfahrzeuge - Zusätzliche Gleitschutzvorrichtungen für Reifen an Personenfahrzeugen und leichten Nutzfahrzeugen - Teil 2: Spezifische Prüfverfahren

Dieses Dokument legt die spezifischen Prüfverfahren für verschiedene Arten von SGD (zusätzliche Gleitschutzvorrichtungen, en: supplementary grip devices) fest: Gleitschutzvorrichtung aus Metall, Gleitschutzvorrichtung aus Gewebe, nichtmetallisches Gleitschutznetz und Hybridgleitschutzvorrichtung.

Véhicules routiers - Dispositifs supplémentaires d'adhérence pour pneumatiques de véhicules particuliers et de véhicules utilitaires légers - Partie 2 : Procédures d'essai spécifiques

Cestna vozila - Dodatne naprave za oprijem pnevmatik na osebnih in lahkih tovornih vozilih - 2. del: Posebni postopki testiranja

General Information

• Status: Not Published
• Public Enquiry End Date: 14-Nov-2023
• ICS: 83.160.10 - Road vehicle tyres
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 15-Sep-2023
• Due Date: 02-Feb-2024
• Ref Project: prEN 16662-2 - Road vehicles - Supplementary grip devices for tyres of passenger cars and light duty vehicles - Part 2: Specific test procedures

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 16662-2:2023
01-november-2023
Cestna vozila - Dodatne naprave za oprijem pnevmatik na osebnih in lahkih
tovornih vozilih - 2. del: Posebni postopki testiranja
Road vehicles - Supplementary grip devices for tyres of passenger cars and light duty
vehicles - Part 2: Specific test procedures
Straßenfahrzeuge - Zusätzliche Gleitschutzvorrichtungen für Reifen an
Personenfahrzeugen und leichten Nutzfahrzeugen - Teil 2: Spezifische Prüfverfahren
Véhicules routiers - Dispositifs supplémentaires d'adhérence pour pneumatiques de
véhicules particuliers et de véhicules utilitaires légers - Partie 2 : Procédures d'essai
spécifiques
Ta slovenski standard je istoveten z: prEN 16662-2
ICS:
83.160.10 Pnevmatike za cestna vozila Road vehicle tyres
oSIST prEN 16662-2:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 16662-2:2023

---------------------- Page: 2 ----------------------
oSIST prEN 16662-2:2023


DRAFT
EUROPEAN STANDARD
prEN 16662-2
NORME EUROPÉENNE

EUROPÄISCHE NORM

August 2023
ICS 83.160.10
English Version

Road vehicles - Supplementary grip devices for tyres of
passenger cars and light duty vehicles - Part 2: Specific test
procedures
Véhicules routiers - Dispositifs supplémentaires Straßenfahrzeuge - Zusätzliche
d'adhérence pour pneumatiques de véhicules Gleitschutzvorrichtungen für Reifen an
particuliers et de véhicules utilitaires légers - Partie 2 : Personenfahrzeugen und leichten Nutzfahrzeugen -
Procédures d'essai spécifiques Teil 2: Spezifische Prüfverfahren
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 301.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16662-2:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 16662-2:2023
prEN 16662-2:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 General requirements . 4
5 Requirements and specific test procedures for metallic SGDs . 4
5.1 Corrosion protection . 4
5.2 Strength . 5
5.3 Wear testing . 5
6 Requirements and spe
...