Environmental matrices - Determination of total dissolved solids (TDS) in water and eluates

This European standard specifies a method for the determination of total dissolved solids (TDS) in water and eluates, provided they are not volatile under the conditions specified or that they do not release water molecules from hydration. It applies to water and eluates containing more than 200 mg/l of total dissolved solids. Samples with lower amounts of dissolved solids can be analyzed by repetition of the drying step.

Umweltrelevante Matrizes - Bestimmung des Gesamtgehaltes an gelösten Feststoffen (TDS) in Wasser und Eluaten

Dieses Dokument legt ein Verfahren zur Bestimmung des Gesamtgehaltes an gelösten Feststoffen (TDS) in Wasser und Eluaten fest (siehe Anhang A), sofern sie nicht unter den angegebenen Bedingungen flüchtig sind bzw. keine Wassermoleküle aus Kristallwasser freisetzen. Das Dokument gilt für Wasser und Eluate mit einem Gesamtgehalt an gelösten Feststoffen von mehr als 100 mg/l. Proben mit niedrigeren Gehalten an gelösten Feststoffen können durch Wiederholung des Trockenschritts analysiert werden.

Matrices environnementales - Détermination de la concentration en matières solides dissoutes totales (TDS) de l'eau et des éluats

Le présent document spécifie une méthode permettant de déterminer la concentration en matières solides dissoutes totales (TDS) dans l’eau et les éluats (voir l’Annexe A) pourvu que ces matières ne soient pas volatiles dans les conditions spécifiées ou qu’elles ne relarguent pas de molécules d’eau d’hydratation. Il s’applique à l’eau et aux éluats contenant plus de 100 mg/l de matières solides dissoutes totales. Les échantillons contenant des quantités moindres de matières solides dissoutes peuvent être analysés en répétant l’étape de dessiccation.

Matriksi z vidika okolja - Določevanje celotnih trdnih raztopljenih snovi (TDS) v vodi in izlužkih

General Information

Status
Published
Public Enquiry End Date
03-Nov-2019
Publication Date
13-Dec-2021
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
29-Nov-2021
Due Date
03-Feb-2022
Completion Date
14-Dec-2021

RELATIONS

Buy Standard

Standard
SIST EN 15216:2022
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
oSIST prEN 15216:2019
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 15216:2022
01-januar-2022
Nadomešča:
SIST EN 15216:2008

Matriksi z vidika okolja - Določevanje celotnih trdnih raztopljenih snovi (TDS) v

vodi in izlužkih

Environmental matrices - Determination of total dissolved solids (TDS) in water and

eluates
Umweltrelevante Matrizes - Bestimmung des Gesamtgehaltes an gelösten Feststoffen
(TDS) in Wasser und Eluaten

Matrices environnementales - Détermination de la concentration en matières solides

dissoutes totales (TDS) de l'eau et des éluats
Ta slovenski standard je istoveten z: EN 15216:2021
ICS:
13.030.20 Tekoči odpadki. Blato Liquid wastes. Sludge
SIST EN 15216:2022 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 15216:2022
---------------------- Page: 2 ----------------------
SIST EN 15216:2022
EN 15216
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2021
EUROPÄISCHE NORM
ICS 13.030.20 Supersedes EN 15216:2007
English Version
Environmental solid matrices - Determination of total
dissolved solids (TDS) in water and eluates

Matrices environnementales solides - Détermination Umweltrelevante Matrizes - Bestimmung des

de la concentration en matières solides dissoutes Gesamtgehaltes an gelösten Feststoffen (TDS) in

totales (TDS) de l'eau et des éluats Wasser und Eluaten
This European Standard was approved by CEN on 11 July 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 15216:2021 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 15216:2022
EN 15216:2021 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

Introduction .................................................................................................................................................................... 4

1 Scope .................................................................................................................................................................... 5

2 Normative references .................................................................................................................................... 5

3 Terms and definitions ................................................................................................................................... 5

4 Principle ............................................................................................................................................................. 5

5 Sample storage and preparation ............................................................................................................... 5

6 Equipment ......................................................................................................................................................... 5

7 Procedure........................................................................................................................................................... 6

8 Calculation of results ..................................................................................................................................... 6

9 Test report ......................................................................................................................................................... 7

Annex A (informative) Performance characteristics ...................................................................................... 8

Bibliography .................................................................................................................................................................... 9

---------------------- Page: 4 ----------------------
SIST EN 15216:2022
EN 15216:2021 (E)
European foreword

This document (EN 15216:2021) has been prepared by Technical Committee CEN/TC 444

“Environmental characterization of solid matrices”, the secretariat of which is held by NEN.

This European Standard shall be given the status of a national standard, either by publication of an

identical text or by endorsement, at the latest by April 2022, and conflicting national standards shall be

withdrawn at the latest by April 2022.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

This document supersedes EN 15216:2007.
In comparison with EN 15216:2007, the following changes have been made:

— Textual changes to clarify the procedure after a third weighing and in case of observed

inhomogeneity.

Any feedback and questions on this document should be directed to the users’ national standards body.

A complete listing of these bodies can be found on the CEN website.

According to the CEN-CENELEC Internal Regulations, the national standards organisations of the

following countries are bound to implement this European Standard: Austria,
...

SLOVENSKI STANDARD
oSIST prEN 15216:2019
01-oktober-2019

Matriksi z vidika okolja - Določevanje celotnih trdnih raztopljenih snovi (TDS) v

vodi in izlužkih

Environmental matrices - Determination of total dissolved solids (TDS) in water and

eluates
Charakterisierung von Abfällen - Bestimmung des Gesamtgehaltes an gelösten
Feststoffen (TDS) in Wasser und Eluaten

Caractérisation des déchets - Détermination de la concentration en matières solides

dissoutes totales (TDS) de l'eau et des éluats
Ta slovenski standard je istoveten z: prEN 15216
ICS:
13.030.20 Tekoči odpadki. Blato Liquid wastes. Sludge
oSIST prEN 15216:2019 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 15216:2019
---------------------- Page: 2 ----------------------
oSIST prEN 15216:2019
DRAFT
EUROPEAN STANDARD
prEN 15216
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2019
ICS 13.030.20 Will supersede EN 15216:2007
English Version
Environmental matrices - Determination of total dissolved
solids (TDS) in water and eluates - Complementary
element

Caractérisation des déchets - Détermination de la Charakterisierung von Abfällen - Bestimmung des

concentration en matières solides dissoutes totales Gesamtgehaltes an gelösten Feststoffen (TDS) in

(TDS) de l'eau et des éluats Wasser und Eluaten

This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee

CEN/TC 444.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations

which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without

notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15216:2019 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 15216:2019
prEN 15216:2019 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

Introduction .................................................................................................................................................................... 4

1 Scope .................................................................................................................................................................... 5

2 Normative references .................................................................................................................................... 5

3 Terms and definitions ................................................................................................................................... 5

4 Principle ............................................................................................................................................................. 5

5 Sample storage and preparation ............................................................................................................... 5

6 Equipment ......................................................................................................................................................... 5

7 Procedure........................................................................................................................................................... 6

8 Calculation of results ..................................................................................................................................... 6

9 Test report ......................................................................................................................................................... 6

Annex A (informative) Performance characteristics ....................................................................................... 8

Bibliography .................................................................................................................................................................... 9

---------------------- Page: 4 ----------------------
oSIST prEN 15216:2019
prEN 15216:2019 (E)
European foreword

This document (prEN 15216:2019) has been prepared by Technical Committee CEN/TC 444 “Test

methods for environmental characterization of solid matrices”, the secretariat of which is held by NEN.

This document is currently submitted to the CEN Enquiry.
This document will supersede EN 15216:2007.
---------------------- Page: 5 ----------------------
oSIST prEN 15216:2019
prE
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.