iTeh Standards logo
EURUSD
Your shopping cart is empty.
SIST

SIST EN 61287-1:2014/AC:2015

(Corrigendum)

Railway applications - Power converters installed on board rolling stock - Part 1: Characteristics and test methods (IEC 61287-1:2014/AC:2014)

Railway applications - Power converters installed on board rolling stock - Part 1: Characteristics and test methods (IEC 61287-1:2014/AC:2014)

CCMC origin: error in the French title

Bahnanwendungen - Stromrichter auf Bahnfahrzeugen - Teil 1: Eigenschaften und Prüfverfahren (IEC 61287-1:2014/AC:2014)

Applications ferroviaires - Convertisseurs de puissance embarqués sur le matériel roulant - Partie 1: Caractéristiques et méthodes (IEC 61287-1:2014/AC:2014)

Železniške naprave - Močnostni pretvorniki na železniških vozilih - 1. del: Karakteristike in preskusne metode - Popravek (IEC 61287-1:2014/AC:2014)

General Information

Status
Published
Publication Date
15-Mar-2015
ICS
29.200 - Rectifiers. Convertors. Stabilized power supply
45.060.01 - Railway rolling stock in general
Technical Committee
ŽEN - Electrical applications for railways
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
16-Jan-2015
Due Date
23-Mar-2015
Completion Date
16-Mar-2015
Ref Project
EN 61287-1:2014/AC:2014 - Railway applications - Power converters installed on board rolling stock - Part 1: Characteristics and test methods

Relations

Corrects
SIST EN 61287-1:2014 - Railway applications - Power convertors installed on board rolling stock - Part 1: Characteristics and test methods
Effective Date
14-Jan-2015
SIST EN 61287-1:2014/AC:2015SIST EN 61287-1:2014/AC:2015
PreviousNext
Corrigendum
SIST EN 61287-1:2014/AC:2015
English language
1 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.$&Bahnanwendungen - Stromrichter auf Bahnfahrzeugen - Teil 1: Eigenschaften und Prüfverfahren (IEC 61287-1:2014/AC:2014)Applications ferroviaires - Convertisseurs de puissance embarqués sur le matériel roulant - Partie 1: Caractéristiques et méthodes (IEC 61287-1:2014/AC:2014)Railway applications - Power converters installed on board rolling stock - Part 1: Characteristics and test methods (IEC 61287-1:2014/AC:2
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

This May Also Interest You

SIST
SIST EN IEC 62590-1:2025(Main)
Railway applications - Electronic power converters for fixed installations - Part 1: General requirements
EN IEC 62590-1:2025

IEC 62590-1:2025 specifies the common requirements and definitions for all power converter applications in fixed installations for power supply of railway systems.
This document applies to fixed installations of following electric traction systems:
railway networks,
metropolitan transport networks including metros, tramways, trolleybuses and fully automated transport systems, magnetic levitated transport systems, electric road systems.
This document applies to AC/DC converters, DC converters and AC converters. Converters for improvement of power quality and for energy saving are also included.
Converters connected to electric traction systems feeding 3AC, 1AC or DC systems for auxiliary purpose are not in the scope of this document but some aspects such as insulation coordination and railway specific conditions can be referred to.
This document, in conjunction with the other parts of IEC 62590, cancels and replaces IEC 62589:2010 and the former IEC 62590:2019.
This document includes the following significant technical changes with respect to IEC 62589:2010 and the former IEC 62590:2019:
a) Split into common requirements and special requirements for different converters;
b) Interface Model for the different systems connected;
c) Split into circuits with their requirements like insulation coordination;
d) Energy efficiency addressed.

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61287-1:2014(Main)
Railway applications - Power convertors installed on board rolling stock - Part 1: Characteristics and test methods
EN 61287-1:2014

IEC 61287-1:2014 defines terminology, service conditions, general characteristics and test methods of electronic power converters onboard of rolling stock. This International Standard is applicable to power electronic converters mounted on board railway rolling-stock and intended for supplying traction circuits; auxiliary circuits of power vehicles, coaches and trailers. This edition includes the following main technical changes with regard to the previous edition: it includes updates as necessary in order to meet the current technical state of the art and to improve clarity. It also takes into account generic railway standards as relevant parts of IEC 62497 and IEC 62498.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
kSIST FprEN IEC 62590-2-1:2025(Main)
Railway applications - Electronic power converters for fixed installations - Part 2-1: DC traction applications - Diode rectifiers
FprEN IEC 62590-2-1:2025
  • Draft
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62841-2-19:2026/A11:2026(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-19: Particular requirements for hand-held jointers
EN IEC 62841-2-19:2025/A11:2025

2021-12-20: This prAA includes common mods to EN IEC 62841-2-19 (PR=75430)
DOW=DOR+48 months is applied to all parts in EN IEC 62841 series

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17984-3:2026(Main)
Assistance Dogs - Part 3: Competencies for Assistance Dogs Professionals
EN 17984-3:2025

This document specifies the competencies required of assistance dogs’ professionals. The purpose of this document is to improve and ensure the quality of professionals working in a role within an assistance dog organization. Each speciality of assistance dog requires a specific set of role competencies and there are some common core competencies.
Core competencies in:
-   breeding;
-   puppy raising;
-   dog care;
-   assessors;
-   orientation and mobility;
-   trainers;
-   instructors.
Specific competencies to train:
-   guide dogs;
-   hearing dogs;
-   medical alert dogs;
-   mobility assistance dogs;
-   autism and development disorder dogs;
-   team training instructor.
It is accepted that assistance dog organisations vary greatly in structure and not every organization will have all the roles identified. Where one person performs more than one role, it is expected that they will have the competencies of all the roles they perform e.g. a dog trainer may also have the competencies of a dog care specialist. And there will be some organisations where some of these roles are not required, e.g. those with no breeding programme will not require the associated role competencies.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 5577:2026(Main)
Non-destructive testing - Ultrasonic testing - Vocabulary (ISO 5577:2025)
EN ISO 5577:2025

This document defines the terms used in ultrasonic non-destructive testing and forms a common basis for standards and general use.
This document does not cover specific terms used in ultrasonic testing with arrays.
NOTE            Terms used in ultrasonic testing with arrays are defined in ISO 23243.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 2719:2026(Main)
Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2025)
EN ISO 2719:2025

This document specifies three procedures, A, B and C, using the Pensky-Martens closed cup tester, for determining the flash point of combustible liquids, liquids with suspended solids, liquids that tend to form a surface film under the test conditions, biodiesel and other liquids in the temperature range of 40 °C to 370 °C.
NOTE 1        Although, technically, kerosene with a flash point above 40 °C can be tested using this document, it is standard practice to test kerosene according to ISO 13736.[5] Similarly, lubricating oils are normally tested according to ISO 2592.[2]
Procedure A is applicable to distillate fuels (diesel, biodiesel blends, heating oil and turbine fuels), new and in-use lubricating oils, paints and varnishes, and other homogeneous liquids not included in the scope of procedures B or C.
Procedure B is applicable to residual fuel oils, cutback residuals, used lubricating oils, mixtures of liquids with solids, and liquids that tend to form a surface film under test conditions or are of such kinematic viscosity that they are not uniformly heated under the stirring and heating conditions of procedure A.
Procedure C is applicable to fatty acid methyl esters (FAME) as specified in specifications such as EN 14214[11] or ASTM D6751.[13]
This document is not applicable to water-borne paints and varnishes.
NOTE 2        Water-borne paints and varnishes can be tested using ISO 3679.[3] Liquids containing traces of highly volatile materials can be tested using ISO 1523[1] or ISO 3679.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 18862:2026(Main)
Coffee and coffee products - Determination of acrylamide - Methods using high-performance liquid chromatography with tandem mass spectrometric detection (HPLC-MS/MS) and gas chromatography with mass spectrometric detection (GC-MS) after derivatization (ISO 18862:2025)
EN ISO 18862:2025

This document specifies methods for the determination of acrylamide in coffee and coffee products by extraction with water, clean-up by solid-phase extraction (SPE) and determination by high-performance liquid chromatography with tandem mass spectrometric detection (HPLC-MS/MS) and gas chromatography with mass spectrometric detection (GC-MS) after derivatization. The methods were validated in a validation study for roasted coffee, soluble coffee, coffee substitutes and coffee products with ranges from 53 μg/kg to 612,1 μg/kg.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 18227:2026(Main)
Automotive fuels - E20 petrol - Requirements and test methods
CEN/TS 18227:2025

This document specifies requirements and test methods for E20 petrol marketed and delivered as such, containing a minimum oxygen content of 3,7 % (m/m) and a maximum of 8,0 % (m/m). The fuel has a maximum of 20,0 % (V/V) ethanol.
It is applicable to fuel for use in spark-ignition petrol-fuelled engines and vehicles.
This document is complementary to EN 228, which describes unleaded petrol containing an oxygen content up to 3,7 % (m/m) and a maximum ethanol content of 10 % (V/V).
NOTE 1   For general petrol engine vehicle warranty, E20 petrol might not be suitable for all vehicles and it is advised that the recommendations of the vehicle manufacturer are consulted before use. E20 petrol might need a validation step to confirm the compatibility of the fuel with the vehicle, which for some existing engines might still be needed.
NOTE 2   For the purposes of this document, the terms “% (m/m)” and “% (V/V)” are used to represent respectively the mass fraction, µ, and the volume fraction, φ.

  • Technical specification
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 80601-2-70:2026(Main)
Medical electrical equipment - Part 2-70: Particular requirements for basic safety and essential performance of sleep apnoea breathing therapy equipment (ISO 80601-2-70:2025)
EN ISO 80601-2-70:2025

This document is applicable to the basic safety and essential performance of sleep apnoea breathing therapy equipment, hereafter referred to as ME equipment, intended to alleviate the symptoms of patients who suffer from obstructive sleep apnoea by delivering a therapeutic breathing pressure to the respiratory tract of the patient. Sleep apnoea breathing therapy equipment is intended for use in the home healthcare environment by lay operators as well as in professional healthcare institutions.
Sleep apnoea breathing therapy equipment is not considered to utilize a physiologic closed-loop-control system unless it uses a physiological patient variable to adjust the therapy settings.
This document excludes sleep apnoea breathing therapy equipment intended for use with neonates.
This document is applicable to ME equipment or an ME system intended for those patients who are not dependent on artificial ventilation. This document is not applicable to ME equipment or an ME system intended for those patients who are dependent on artificial ventilation such as patients with central sleep apnoea.
This document is also applicable to those accessories intended by their manufacturer to be connected to sleep apnoea breathing therapy equipment, where the characteristics of those accessories can affect the basic safety or essential performance of the sleep apnoea breathing therapy equipment.
Masks and application accessories intended for use during sleep apnoea breathing therapy are additionally addressed by ISO 17510. Refer to Figure AA.1 for items covered further under this document.
If a clause or subclause is specifically intended to be applicable to ME equipment only, or to ME systems only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME equipment and to ME systems, as relevant.
Hazards inherent in the intended physiological function of ME equipment or ME systems within the scope of this document are not covered by specific requirements in this document except in 7.2.13 and 8.4.1 of the general standard.
NOTE 2        See also 4.2 of the general standard.
This document does not specify the requirements for:
–    ventilators or accessories intended for critical care ventilators for ventilator-dependent patients, which are given in ISO 80601‑2‑12.
–    ventilators or accessories intended for anaesthetic applications, which are given in ISO 80601-2-13.
–    ventilators or accessories intended for home care ventilators for ventilator-dependent patients, which are given in ISO 80601-2-72.
–    ventilators or accessories intended for emergency and transport, which are given in ISO 80601-2-84.
–    ventilators or accessories intended for home-care ventilatory support, which are given in ISO 80601‑2-79 and ISO 80601‑2‑80.
–    high-frequency ventilators[23], which are given in ISO 80601-2-87.
–    respiratory high flow equipment, which are given in ISO 80601‑2‑90;
NOTE 3      ISO 80601-2-80 ventilatory support equipment can incorporate high-flow therapy operational mode, but such a mode is only for spontaneously breathing patients.
–    user-powered resuscitators, which are given in ISO 10651-4;
–    gas-powered emergency resuscitators, which are given in ISO 10651-5;
–    oxygen therapy constant flow ME equipment; and
–    cuirass or “iron-lung” ventilation equipment.

  • Standard
    89 pages
    English language
    sale 10% off
    e-Library read for
    1 day