SIST EN 1659:2000
(Main)In vitro diagnostic systems - Culture media for microbiology - Terms and definitions
In vitro diagnostic systems - Culture media for microbiology - Terms and definitions
This European Standard provides terms for different classifications of culture media used in microbiology (bacteriology and mycology).
In-vitro-Diagnostik/Diagnostika - Kulturmedien für die Mikrobiologie - Begriffe
Diese Europäische Norm definiert Benennungen für verschiedene Einteilungen von Kulturmedien, die in der Mikrobiologie (Bakteriologie und Mykologie) Anwendung finden.
Systemes de diagnostic in vitro - Milieux de culture de microbiologie - Termes et définitions
La présente norme européenne définit une terminologie pour le classement des milieux de culture utilisés en microbiologie (bactériologie et mycologie).
Diagnostični sistemi in vitro – Gojišča za mikrobiologijo – Izrazi in definicije
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.In-vitro-Diagnostik/Diagnostika - Kulturmedien für die Mikrobiologie - BegriffeSystemes de diagnostic in vitro - Milieux de culture de microbiologie - Termes et définitionsIn vitro diagnostic systems - Culture media for microbiology - Terms and definitions11.100.10In vitro diagnos
...
This May Also Interest You
This document specifies the preparation and reproduction of design parts. This document defines the basic principles and structure of design parts lists. This document is applicable to all design parts lists for railway applications.
- Standard26 pagesEnglish languagesale 10% offe-Library read for×1 day
This document is applicable only to decorative fireplaces that have been manufactured for domestic use, which produce a flame using liquid alcohol, hereafter referred to as fuel.
NOTE 1 The requirements outlined in this document can also be applied for outside domestic settings. In that case, additional or different rules on the use of the fireplaces can apply.
This document is applicable to free-standing, wall-mounted and built-in fireplaces.
This document is applicable to decorative fireplaces that require manual user interaction for ignition, filling, re-filling or extinguishing the fireplace.
NOTE 2 The fireplaces can contain some electric or electronic components.
This document is applicable to fireplaces ready for use, whose fuel box is of one unit or is an integral component of the fireplace but not to fireplaces with a fuel tank separate from the fireplace.
This document does not apply to fireplaces specifically designed for heating food or keeping food warm (rechauds), nor does it apply to fireplaces for use in boats, caravans, other vehicles or outdoor areas.
This document does not apply to fireplaces with a power output higher than 4,5 kW or with a defined heating function.
NOTE 3 National regulations can restrict the power output to less than 4,5 kW.
- Standard41 pagesEnglish languagesale 10% offe-Library read for×1 day
2021-12-20: This prAA includes common mods to EN IEC 62841-2-19 (PR=75430)
DOW=DOR+48 months is applied to all parts in EN IEC 62841 series
- Amendment9 pagesEnglish languagesale 10% offe-Library read for×1 day
- 16-Dec-2025
- 25.100.01
- 25.140.20
- 2006/42/EC
- M/396
- VGA
This document specifies the competencies required of assistance dogs’ professionals. The purpose of this document is to improve and ensure the quality of professionals working in a role within an assistance dog organization. Each speciality of assistance dog requires a specific set of role competencies and there are some common core competencies.
Core competencies in:
- breeding;
- puppy raising;
- dog care;
- assessors;
- orientation and mobility;
- trainers;
- instructors.
Specific competencies to train:
- guide dogs;
- hearing dogs;
- medical alert dogs;
- mobility assistance dogs;
- autism and development disorder dogs;
- team training instructor.
It is accepted that assistance dog organisations vary greatly in structure and not every organization will have all the roles identified. Where one person performs more than one role, it is expected that they will have the competencies of all the roles they perform e.g. a dog trainer may also have the competencies of a dog care specialist. And there will be some organisations where some of these roles are not required, e.g. those with no breeding programme will not require the associated role competencies.
- Standard35 pagesEnglish languagesale 10% offe-Library read for×1 day
This document defines the terms used in ultrasonic non-destructive testing and forms a common basis for standards and general use.
This document does not cover specific terms used in ultrasonic testing with arrays.
NOTE Terms used in ultrasonic testing with arrays are defined in ISO 23243.
- Standard55 pagesEnglish languagesale 10% offe-Library read for×1 day
This document specifies three procedures, A, B and C, using the Pensky-Martens closed cup tester, for determining the flash point of combustible liquids, liquids with suspended solids, liquids that tend to form a surface film under the test conditions, biodiesel and other liquids in the temperature range of 40 °C to 370 °C.
NOTE 1 Although, technically, kerosene with a flash point above 40 °C can be tested using this document, it is standard practice to test kerosene according to ISO 13736.[5] Similarly, lubricating oils are normally tested according to ISO 2592.[2]
Procedure A is applicable to distillate fuels (diesel, biodiesel blends, heating oil and turbine fuels), new and in-use lubricating oils, paints and varnishes, and other homogeneous liquids not included in the scope of procedures B or C.
Procedure B is applicable to residual fuel oils, cutback residuals, used lubricating oils, mixtures of liquids with solids, and liquids that tend to form a surface film under test conditions or are of such kinematic viscosity that they are not uniformly heated under the stirring and heating conditions of procedure A.
Procedure C is applicable to fatty acid methyl esters (FAME) as specified in specifications such as EN 14214[11] or ASTM D6751.[13]
This document is not applicable to water-borne paints and varnishes.
NOTE 2 Water-borne paints and varnishes can be tested using ISO 3679.[3] Liquids containing traces of highly volatile materials can be tested using ISO 1523[1] or ISO 3679.
- Standard35 pagesEnglish languagesale 10% offe-Library read for×1 day
This document specifies methods for the determination of acrylamide in coffee and coffee products by extraction with water, clean-up by solid-phase extraction (SPE) and determination by high-performance liquid chromatography with tandem mass spectrometric detection (HPLC-MS/MS) and gas chromatography with mass spectrometric detection (GC-MS) after derivatization. The methods were validated in a validation study for roasted coffee, soluble coffee, coffee substitutes and coffee products with ranges from 53 μg/kg to 612,1 μg/kg.
- Standard32 pagesEnglish languagesale 10% offe-Library read for×1 day
This document specifies requirements and test methods for E20 petrol marketed and delivered as such, containing a minimum oxygen content of 3,7 % (m/m) and a maximum of 8,0 % (m/m). The fuel has a maximum of 20,0 % (V/V) ethanol.
It is applicable to fuel for use in spark-ignition petrol-fuelled engines and vehicles.
This document is complementary to EN 228, which describes unleaded petrol containing an oxygen content up to 3,7 % (m/m) and a maximum ethanol content of 10 % (V/V).
NOTE 1 For general petrol engine vehicle warranty, E20 petrol might not be suitable for all vehicles and it is advised that the recommendations of the vehicle manufacturer are consulted before use. E20 petrol might need a validation step to confirm the compatibility of the fuel with the vehicle, which for some existing engines might still be needed.
NOTE 2 For the purposes of this document, the terms “% (m/m)” and “% (V/V)” are used to represent respectively the mass fraction, µ, and the volume fraction, φ.
- Technical specification16 pagesEnglish languagesale 10% offe-Library read for×1 day
This document is applicable to the basic safety and essential performance of sleep apnoea breathing therapy equipment, hereafter referred to as ME equipment, intended to alleviate the symptoms of patients who suffer from obstructive sleep apnoea by delivering a therapeutic breathing pressure to the respiratory tract of the patient. Sleep apnoea breathing therapy equipment is intended for use in the home healthcare environment by lay operators as well as in professional healthcare institutions.
Sleep apnoea breathing therapy equipment is not considered to utilize a physiologic closed-loop-control system unless it uses a physiological patient variable to adjust the therapy settings.
This document excludes sleep apnoea breathing therapy equipment intended for use with neonates.
This document is applicable to ME equipment or an ME system intended for those patients who are not dependent on artificial ventilation. This document is not applicable to ME equipment or an ME system intended for those patients who are dependent on artificial ventilation such as patients with central sleep apnoea.
This document is also applicable to those accessories intended by their manufacturer to be connected to sleep apnoea breathing therapy equipment, where the characteristics of those accessories can affect the basic safety or essential performance of the sleep apnoea breathing therapy equipment.
Masks and application accessories intended for use during sleep apnoea breathing therapy are additionally addressed by ISO 17510. Refer to Figure AA.1 for items covered further under this document.
If a clause or subclause is specifically intended to be applicable to ME equipment only, or to ME systems only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME equipment and to ME systems, as relevant.
Hazards inherent in the intended physiological function of ME equipment or ME systems within the scope of this document are not covered by specific requirements in this document except in 7.2.13 and 8.4.1 of the general standard.
NOTE 2 See also 4.2 of the general standard.
This document does not specify the requirements for:
– ventilators or accessories intended for critical care ventilators for ventilator-dependent patients, which are given in ISO 80601‑2‑12.
– ventilators or accessories intended for anaesthetic applications, which are given in ISO 80601-2-13.
– ventilators or accessories intended for home care ventilators for ventilator-dependent patients, which are given in ISO 80601-2-72.
– ventilators or accessories intended for emergency and transport, which are given in ISO 80601-2-84.
– ventilators or accessories intended for home-care ventilatory support, which are given in ISO 80601‑2-79 and ISO 80601‑2‑80.
– high-frequency ventilators[23], which are given in ISO 80601-2-87.
– respiratory high flow equipment, which are given in ISO 80601‑2‑90;
NOTE 3 ISO 80601-2-80 ventilatory support equipment can incorporate high-flow therapy operational mode, but such a mode is only for spontaneously breathing patients.
– user-powered resuscitators, which are given in ISO 10651-4;
– gas-powered emergency resuscitators, which are given in ISO 10651-5;
– oxygen therapy constant flow ME equipment; and
– cuirass or “iron-lung” ventilation equipment.
- Standard89 pagesEnglish languagesale 10% offe-Library read for×1 day
2021-12-20: This prAA includes common mods to EN IEC 62841-2-20 (PR=75425)
DOW=DOR+48 months is applied to all parts in EN IEC 62841 series
- Amendment8 pagesEnglish languagesale 10% offe-Library read for×1 day
- 16-Dec-2025
- 25.080.60
- 25.140.20
- 2006/42/EC
- M/396
- VGA
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...