SIST EN 526:2000

Inland navigation vessels - Gangway with a length not exceeding 8 m - Requirements, types

This standard applies to gangways on inland navigation vessels except those gangways intended for passengers. It specifies types, main dimensions and test conditions which have to be observed for safety reasons. A gangway serves as walkway between ship and shore.

Fahrzeuge der Binnenschiffahrt - Landstege bis 8 m Länge - Anforderungen, Bauarten

Diese Norm gilt für Landstege auf Fahrzeugen der Binnenschiffahrt mit Ausnahme der für Fahrgäste bestimmten Landstege. Sie legt Bauart, Hauptmasse und Prüfbedingungen fest, die aus sicherheitstechnischen Gründen eingehalten werden müssen. Landstege dienen als Verkehrsweg zwischen Bord und Land.

Bateaux de navigation intérieure - Passerelles d'embarquement d'une longueur qui ne dépasse pas 8 m - Exigences, types

La présente norme est applicable aux passerelles d'embarquement sur les bateaux de navigation intérieure à l'exception des passerelles d'embarquement destinées aux passagers. Elle spécifie les types, les dimensions principales et les conditions d'essai qui doivent être respectés pour des raisons de sécurité. Une passerelle d'embarquement sert d'accès du navire à terre et vice versa.

Inland navigation vessels - Gangway with a length not exceeding 8 m - Requirements, types

General Information

• Status: Published
• Publication Date: 30-Nov-2000
• ICS: 47.020.10 - Hulls and their structure elements
• ICS: 47.060 - Inland navigation vessels
• Technical Committee: SS SPL - Technical Board for the general field
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Dec-2000
• Due Date: 01-Dec-2000
• Completion Date: 01-Dec-2000
• Ref Project: EN 526:1993 - Inland navigation vessels - Gangway with a length not exceeding 8 m - Requirements, types

Overview

EN 526:1993 (CEN) covers gangways on inland navigation vessels with a length not exceeding 8 m. The standard applies to gangways intended for crew and operational use (not passenger gangways). It specifies recognised types, the main dimensions and the test conditions that must be observed for safety and reliable ship–shore access.

This standard is intended for shipbuilders, operators, naval architects and safety officers involved in the selection, installation and verification of gangways for inland navigation vessels.

Key Topics

• Scope and application

  • Applies to gangways on inland navigation vessels up to 8 m in length
  • Excludes gangways intended specifically for passengers

• Types and design considerations

  • Classification of commonly used gangway types for operational access
  • Guidance on structural form and configuration to support safe embarkation and disembarkation

• Main dimensions

  • Identification of essential dimensional parameters to be observed for compatibility with vessel and shore interfaces
  • Emphasis on practical fit and clearances to enable safe movement along the gangway

• Test conditions and safety requirements

  • Description of required test conditions to validate structural performance and safe use
  • Focus on documented verification and routine checks to maintain compliance

• Safety focus

  • Ensures stable, secure ship–shore access and reduces operational risk
  • Supports consistent application across inland navigation operations

Applications

EN 526:1993 is practical for:

• Shipyards designing or fitting gangways on inland vessels
• Operators establishing procurement specifications and inspection checklists
• Crewing and safety teams developing operational procedures for embarkation and disembarkation
• Technical assessors verifying compliance with CEN requirements for non‑passenger gangways

Practical benefits include improved safety of ship–shore transfers, clearer specification of dimensional and structural expectations, and a harmonised basis for tests and acceptance.

Related Standards

• The standard is a CEN publication and should be used alongside other CEN guidance and national regulations covering inland navigation vessels, hull structure and operational safety.
• Users should consult applicable national maritime regulations and classification society rules for complementary requirements and certification processes.

For implementation, refer to the EN 526:1993 text for precise definitions, required tests and exact dimensional references. Ensure that procurement, installation and inspection processes reference the standard to achieve compliance and operational safety.

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2000
Inland navigation vessels - Gangway with a length not exceeding 8 m -
Requirements, types
Inland navigation vessels - Gangway with a length not exceeding 8 m - Requirements,
types
Fahrzeuge der Binnenschiffahrt - Landstege bis 8 m Länge - Anforderungen, Bauarten
Bateaux de navigation intérieure - Passerelles d'embarquement d'une longueur qui ne
dépasse pas 8 m - Exigences, types
Ta slovenski standard je istoveten z: EN 526:1993
ICS:
47.020.10 Ladijski trupi in njihovi Hulls and their structure
konstrukcijski elementi elements
47.060 -H]HUVNDLQUHþQDSORYLOD Inland navigation vessels
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni
...