iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 1010-4:2004/kFprA1:2009

(Amendment)

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines

Sicherheit von Maschinen - Sicherheitsanforderungen an Konstruktion und Bau von Druck- und Papierverarbeitungsmaschinen - Teil 4: Buchbinderei, Papierverarbeitungs- und Papierveredelungsmaschinen

Sécurité des machines - Exigences de sécurité pour la conception et la construction de machines d'impressions et de tranformation du papier - Partie 4: Machines à relier les livresmachines de transformation et de finition du papier

Varnost strojev - Varnostne zahteve za načrtovanje in konstrukcijo tiskarskih strojev in strojev za obdelavo papirja - 4. del: Stroji za vezavo knjig, obdelavo in izdelavo papirja

General Information

Status
Not Published
Public Enquiry End Date
14-Jul-2009
ICS
37.100.10 - Reproduction equipment
85.100 - Equipment for the paper industry
Technical Committee
I13 - Imaginarni 13
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
10-Oct-2019
Due Date
15-Oct-2019
Completion Date
10-Oct-2019
Directive
2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
98/37/EC - Machinery
Mandate
M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
Ref Project
EN 1010-4:2004/FprA1 - Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines

Relations

Amends
SIST EN 1010-4:2004 - Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines
Effective Date
01-Jul-2009
Consolidated By
SIST EN 1010-4:2004+A1:2009 - Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines
Effective Date
18-Jan-2023
Consolidated By
SIST EN 1010-4:2004+A1:2009 - Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines
Effective Date
19-Jan-2023
Consolidated By
SIST EN 1010-4:2004+A1:2009 - Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines
Effective Date
01-Dec-2009

Buy Standard

EN 1010-4:2004/kFprA1:2009EN 1010-4:2004/kFprA1:2009
PreviousNext
Draft
EN 1010-4:2004/kFprA1:2009
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1010-4:2004/kFprA1:2009
01-julij-2009
9DUQRVWVWURMHY9DUQRVWQH]DKWHYH]DQDþUWRYDQMHLQNRQVWUXNFLMRWLVNDUVNLK
VWURMHYLQVWURMHY]DREGHODYRSDSLUMDGHO6WURML]DYH]DYRNQMLJREGHODYRLQ
L]GHODYRSDSLUMD
Safety of machinery - Safety requirements for the design and construction of printing and
paper converting machines - Part 4: Bookbinding, paper converting and finishing
machines
Sicherheit von Maschinen - Sicherheitsanforderungen an Konstruktion und Bau von
Druck- und Papierverarbeitungsmaschinen - Teil 4: Buchbinderei, Papierverarbeitungs-
und Papierveredelungsmaschinen
Sécurité des machines - Exigences de sécurité pour la conception et la construction de
machines d'impressions et de tranformation du papier - Partie 4: Machines à relier les
livresmachines de transformation et de finition du papier
Ta slovenski standard je istoveten z: EN 1010-4:2004/FprA1
ICS:
37.100.10 Reprodukcijska oprema Reproduction equipment
85.100 Oprema za papirno industrijo Equipment for the paper
industry
SIST EN 1010-4:2004/kFprA1:2009 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 1010-4:2004/kFprA1:2009

---------------------- Page: 2 ----------------------

SIST EN 1010-4:2004/kFprA1:2009
EUROPEAN STANDARD
FINAL DRAFT
EN 1010-4:2004
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
May 2009
ICS 37.100.10; 85.100

English Version
Safety of machinery - Safety requirements for the design and
construction of printing and paper converting machines - Part 4:
Bookbinding, paper converting and finishing machines
Sécurité des machines - Exigences de sécurité pour la Sicherheit von Maschinen - Sicherheitsanforderungen an
conception et la construction de machines d'impressions et Konstruktion und Bau von Druck- und
de tranformation du papier - Partie 4: Machines à relier les Papierverarbeitungsmaschinen - Teil 4: Buchbinderei,
livresmachines de transformation et de finition du papier Papierverarbeitungs- und Papierveredelungsmaschinen
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 198.
This draft amendment A1, if approved, will modify the European Standard EN 1010-4:2004. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any mean
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 1010-3:2003/kFprA1:2009(Amendment)
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3: Cutting machines
EN 1010-3:2002/FprA1
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1010-2:2006/kFprA1:2010(Amendment)
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery
EN 1010-2:2006/FprA1
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13023:2004/kFprA1:2009(Amendment)
Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3
EN 13023:2003/FprA1
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1010-1:2005/kFprA1:2010(Amendment)
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements
EN 1010-1:2004/FprA1
  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1010-5:2005/kprA1:2011(Amendment)
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 5: Machines for the production of corrugated board and machines for the conversion of flat and corrugated board
EN 1010-5:2005/FprA1

This standard applies to machines for the production of corrugated board and the conversion of flat and corrugated board:
-   corrugated board production machines;
-   folder gluer machines;
-   printer slotters, rotary die cutters and combined machines (inline machines);
-   stand-alone platen presses, for single stroke mode, dwell mode and continuous operation mode, for cutting and creasing;
-   automatic flatbed punching machines;
-   tube winding machines.
This document shall be used together with EN 1010-1:2004+A1:2010. Both parts together identify all significant hazards relevant to machines for the production of corrugated board and the conversion of flat and corrugated board when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). The specific requirements in EN 1010-5 take precedence over respective requirements in EN 1010-1:2004+A1:2010.
This document does not deal with risks generated by noise emitted from the machines. These issues are fundamentally covered in EN 1010-1:2004+A1:2010. However, this document specifies requirements for noise reduction of corrugated board and flatbed punching machines.
This document is not applicable to machines for the production of corrugated board and machines for the conversion of flat and corrugated board which are manufactured before the date of publication of this document by CEN.

  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1010-1:2005+A1:2011(Main)
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements
EN 1010-1:2004+A1:2010

1.1 This document applies to:
- printing machines for printing on paper and similar materials, including screen printing presses; equipment used in the preparation of the printing process and additional equipment on printing machines are also considered to be printing machines. This standard also covers machinery used for the handling of paper, products, printing formes and inks (before and after the printing process) as well as machinery for cleaning printing formes and checking the print quality (auxiliary printing machinery).
- paper converting machines, i. e. machines to process, convert or finish paper, board and similar materials which are processed, converted or finished in a similar manner.
NOTE Similar substrates are, for example, board, corrugated board, plastic film, aluminium foil, sheet metal and photographic paper.
1.2 This document deals with all common significant hazards relevant to printing and paper converting machinery when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4).
1.3 This document is not applicable to printing and paper converting machines which are manufactured before the date of publication of this document by CEN.
1.4 This document does not apply to:
- winder-slitters and sheeters in paper finishing (sheeters with unwinders) (see EN 1034-1:2000,
EN 1034-3:2000, EN 1034-5:2005);
- office-type collating machines equipped with friction feeders;
- mail processing machines;
- machines used for filling packages (such as machines for shaping, filling, and closing the package);
- textile printing presses.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1010-2:2006+A1:2010(Main)
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery
EN 1010-2:2006+A1:2010

This document applies to: Pre-press machinery (machinery and devices for the production of master copies and printing forms): exposure equipment for the production of films and printing forms; equipment for developing films and printing forms; washing machines for printing forms; machines for bending printing forms; punching machines for film and printing forms; cutting machines for film and printing forms; machines for the production of gravure printing forms; scanners. Printing and varnishing machines: proofing presses; sheet-fed printing presses and varnishing machines including digital printing presses; web-fed rotary presses and varnishing machines including digital printing presses; screen printing presses.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13023:2004+A1:2010(Main)
Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3
EN 13023:2003+A1:2010

This standard specifies all the information necessary to carry out efficiently and under standardized conditions the determination, declaration and verification of airborne noise emission from printing and paper converting machines covered by the EN 1010 series and from paper making and finishing machines covered by the EN 1034 series. It specifies noise measurement methods and installation and operating conditions to be used for the test. This standard applies to those machines listed in the normative annexes A to J. The principles of this noise test code should be applied as far as possible also for the determination of noise emission of machines and machine parts not listed in the normative annexes A to J. In such cases, all information relating to assembly, installation and operating conditions as well as the arrangement of work stations should be recorded and reported in the test report. Noise emission characteristics include emission sound pressure levels at work stations and the sound power level. Declared noise emission values permit comparison of printing and paper machines on the market. The use of this noise test code ensures the reproducibility of the determination of the characteristic noise emissions within specific limits. These limits are determined by the accuracy grade of the noise measuring method used. Noise measurements specified by this standard are carried out by the engineering method (accuracy grade 2) and the survey method (accuracy grade 3).

  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1010-3:2003+A1:2009(Main)
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3: Cutting machines
EN 1010-3:2002+A1:2009

1.1   This European Standard applies to cutting machines used in paper converting:
-   guillotines;
-    three-knife trimmers;
-    index cutting machines;
-   trimmers;
-   rotary cutters;
-   round cornering machines;
-   label punching machines.
This European Standard is only applicable in conjunction with !EN 1010-1:2004+A1". Both parts together identify all significant hazards relevant to the cutting machines when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). The specific requirements of this European Standard take precedence over respective requirements of !EN 1010-1:2004+A1".
This European Standard is not applicable to cutting machines manufactured before the publication of this European Standard by CEN.
1.2   This standard does not apply to winder-slitters or sheeters (see EN 1034-1, EN 1034-3, prEN 1034-5).

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1010-4:2004+A1:2009(Main)
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines
EN 1010-4:2004+A1:2009

This document applies to
-   bookbinding machines:
-   stitching, riveting, eyeletting and attaching machines;
-   gang stitchers;
-   gathering machines;
-   perfect binders;
-   paper drills;
-   book signature presses;
-   book presses;
-   sheet folding machines;
-   book production lines for the production of books with hard covers;
-   back rounding and pressing machines;
-   backlining and head banding machines;
-   casing-in machines;
-   book cover crease forming machines.
-   paper converting machines:
-   machines for the production of envelopes;
-   machines for the production of sanitary items;
-   inserting machines;
-   counter-stackers;
-   paper embossing machines.
-   paper finishing machines:
-   coaters;
-   laminators.
This document shall be used together with EN 1010-1:2004+A1. Both parts together identify all significant hazards relevant to bookbinding, paper converting and paper finishing machines when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). The specific requirements in EN 1010 4 take precedence over respective requirements in EN 1010-1:2004+A1.
This document does not deal with risks generated by noise emitted from the machines. These issues are covered basically in EN 1010-1:2004+A1. However, for machines like sheet folding machines and machines for the production of envelopes and sanitary items, some specific proposals for noise reduction measures are given.
This document is not applicable to bookbinding, paper converting and finishing machines manufactured before the date of publication of this document by CEN.

  • Standard
    70 pages
    English language
    sale 10% off
    e-Library read for
    1 day