SIST EN IEC 60904-3:2019
(Main)Photovoltaic devices - Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data
Photovoltaic devices - Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data
This part of IEC 60904 applies to the following photovoltaic devices for terrestrial applications:
– solar cells with or without a protective cover;
– sub-assemblies of solar cells;
– modules; and
– systems.
NOTE The term “test specimen” is used to denote any of these devices.
The principles contained in this document cover testing in both natural and simulated sunlight.
Photovoltaic conversion is spectrally selective due to the nature of the semiconductor
materials used in PV solar cells and modules. To compare the relative performance of
different PV devices and materials a reference standard solar spectral distribution is
necessary. This document includes such a reference solar spectral irradiance distribution.
This document also describes basic measurement principles for determining the electrical
output of PV devices. The principles given in this document are designed to relate the
performance rating of PV devices to a common reference terrestrial solar spectral irradiance
distribution.
The reference terrestrial solar spectral irradiance distribution is given in this document in
order to classify solar simulators according to the spectral performance requirements
contained in IEC 60904-9.
Photovoltaische Einrichtungen - Teil 3: Messgrundsätze für terrestrische photovoltaische (PV) Einrichtungen mit Angaben über die spektrale Strahlungsverteilung
Dispositifs photovoltaïques - Partie 3: Principes de mesure des dispositifs solaires photovoltaïques (PV) à usage terrestre incluant les données de l'éclairement spectral de référence
IEC 60904-3:2019 est disponible sous forme de IEC 60904-3:2019 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.
L'IEC 60904-3:2019 décrit des principes de mesure de base pour la détermination de la sortie électrique des dispositifs PV. Les principes indiqués dans le présent document sont prévus pour relier les caractéristiques assignées de performance des dispositifs PV à une distribution spectrale de l'éclairement solaire terrestre de référence commune. La distribution spectrale de l'éclairement solaire terrestre de référence est indiquée dans le présent document pour classifier les simulateurs solaires selon les exigences pour le fonctionnement spectral contenues dans l'IEC 60904-9. Les principes contenus dans le présent document comprennent les essais réalisés sous un éclairement solaire naturel ainsi que sous un éclairement solaire simulé. Cette nouvelle édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) nouveau calcul de toutes les données spectrales en raison de la présence d'un certain nombre d'erreurs de calcul et d'arrondi dans la troisième édition; remplacement de l'éclairement spectral global par les données exactes de la deuxième edition;
b) clarification de la distribution angulaire de l'éclairement
Fotonapetostne naprave - 3. del: Postopki merjenja prizemnih fotonapetostnih (PV) sončnih naprav s podatki referenčnega spektralnega sevanja
Ta del standarda IEC 60904 se uporablja za naslednje prizemne fotonapetostne naprave:
– sončne celice z zaščitnim pokrovom ali brez njega;
– podsestave sončnih celic;
– module; in
– sisteme.
OPOMBA: Za označevanje katere koli od teh naprav se uporablja izraz »preskušanec«.
Načela iz tega dokumenta zajemajo preskušanje tako pod naravno kot simulirano sončno svetlobo. Fotonapetostna pretvorba je spektralno selektivna zaradi narave polprevodniških materialov, uporabljenih v fotonapetostnih sončnih celicah in modulih. Za primerjavo relativne učinkovitosti različnih fotonapetostnih naprav in materialov je potrebna referenčna standardna spektralna porazdelitev sončnega sevanja. Ta dokument vključuje takšno referenčno spektralno porazdelitev sončnega sevanja.
Ta dokument prav tako opisuje osnovna načela merjenja za ugotavljanje električne moči fotonapetostnih naprav. Načela v tem dokumentu so namenjena povezavi ocene učinkovitosti fotonapetostnih naprav s splošno referenčno prizemno spektralno porazdelitvijo sončnega sevanja.
Referenčna prizemna spektralna porazdelitev sončnega sevanja je v tem dokumentu podana z namenom razvrstitve sončnih simulatorjev v skladu z zahtevami glede spektralne učinkovitosti iz standarda IEC 60904-9.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 60904-3:2019
01-september-2019
Nadomešča:
SIST EN 60904-3:2016
Fotonapetostne naprave - 3. del: Postopki merjenja prizemnih fotonapetostnih
(PV) sončnih naprav s podatki referenčnega spektralnega sevanja
Photovoltaic devices - Part 3: Measurement principles for terrestrial photovoltaic (PV)
solar devices with reference spectral irradiance data
Photovoltaische Einrichtungen - Teil 3: Messgrundsätze für terrestrische photovoltaische
(PV) Einrichtungen mit Angaben über die spektrale Strahlungsverteilung
Dispositifs photovoltaïques - Partie 3: Principes de mesure des dispositifs solaires
photovoltaïques (PV) à usage terrestre incluant les données de l'éclairement spectral de
référence
Ta slovenski standard je istoveten z: EN IEC 60904-3:2019
ICS:
17.240 Merjenje sevanja Radiation measurements
27.160 Sončna energija Solar energy engineering
SIST EN IEC 60904-3:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 60904-3:2019
---------------------- Page: 2 ----------------------
SIST EN IEC 60904-3:2019
EUROPEAN STANDARD EN IEC 60904-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2019
ICS 27.160 Supersedes EN 60904-3:2016
English Version
Photovoltaic devices - Part 3: Measurement principles for
terrestrial photovoltaic (PV) solar devices with reference spectral
irradiance data
(IEC 60904-3:2019)
Dispositifs photovoltaïques - Partie 3: Principes de mesure Photovoltaische Einrichtungen - Teil 3: Messgrundsätze für
des dispositifs solaires photovoltaïques (PV) à usage terrestrische photovoltaische (PV)-Einrichtungen mit
terrestre incluant les données de l'éclairement spectral de Angaben über die spektrale Strahlungsverteilung
référence (IEC 60904-3:2019)
(IEC 60904-3:2019)
This European Standard was approved by CENELEC on 2019-03-22. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60904-3:2019 E
---------------------- Page: 3 ----------------------
SIST EN IEC 60904-3:2019
EN IEC 60904-3:2019 (E)
European foreword
The text of document 82/1342/CDV, future edition 4 of IEC 60904-3, prepared by IEC/TC 82 "Solar
photovoltaic energy systems" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 60904-3:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-01-05
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-07-05
document have to be withdrawn
This document supersedes EN 60904-3:2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 60904-3:2019 was approved by CENELEC as a European
Standard without any modification.
2
---------------------- Page: 4 ----------------------
SIST EN IEC 60904-3:2019
EN IEC 60904-3:2019 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60891 - Photovoltaic devices - Procedures for EN 60891 -
temperature and irradiance corrections to
measured I-V characteristics
IEC 60904-1 - Photovoltaic devices - Part 1: EN 60904-1 -
Measurement of photovoltaic current-
voltage characteristics
IEC 60904-2 - Photovoltaic devices - Part 2: EN 60904-2 -
Requirements for photovoltaic reference
devices
IEC 60904-5 - Photovoltaic devices - Part 5: EN 60904-5 -
Determination of the equivalent cell
temperature (ECT) of photovoltaic (PV)
devices by the open-circuit voltage method
IEC 60904-7 - Photovoltaic devices - Part 7: Computation EN 60904-7 -
of the spectral mismatch correction for
measurements of photovoltaic devices
IEC 60904-8 - Photovoltaic devices - Part 8: EN 60904-8 -
Measurement of spectral responsivity of a
photovoltaic (PV) device
IEC 60904-9 - Photovoltaic devices - Part 9: Solar EN 60904-9 -
simulator performance requirements
IEC 61853-4 - EN IEC 61853-4 -
3
---------------------- Page: 5 ----------------------
SIST EN IEC 60904-3:2019
---------------------- Page: 6 ----------------------
SIST EN IEC 60904-3:2019
IEC 60904-3
®
Edition 4.0 2019-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Photovoltaic devices –
Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices
with reference spectral irradiance data
Dispositifs photovoltaïques –
Partie 3: Principes de mesure des dispositifs solaires photovoltaïques (PV) à
usage terrestre incluant les données de l'éclairement énergétique spectral de
référence
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 27.160 ISBN 978-2-8322-6268-9
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN IEC 60904-3:2019
– 2 – IEC 60904-3:2019 © IEC 2019
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Measurement principles . 6
5 Reference solar spectral and angular irradiance distribution . 6
Annex A (informative) Use of SMARTS . 58
Figure 1 – Global and direct reference solar spectral irradiance distribution listed in
Table 1 . 57
Table 1 – Reference solar spectral irradiance distribution . 8
Table A.1 – Input data for generation of reference solar spectral irradiance distribution . 58
---------------------- Page: 8 ----------------------
SIST EN IEC 60904-3:2019
IEC 60904-3:2019 © IEC 2019 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
PHOTOVOLTAIC DEVICES –
Part 3: Measurement principles for terrestrial photovoltaic (PV)
solar devices with reference spectral irradiance data
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60904-3 has been prepared by IEC technical committee 82: Solar
photovoltaic energy systems.
This fourth edition cancels and replaces the third edition published in 2016. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) all spectral data were recalculated due to some minor calculation and rounding errors in
the third edition; the global spectral irradiance returned to exactly the data of the second
edition;
b) the angular distribution of the irradiance was clarified.
This publication contains an attached file in the form of an Excel spreadsheet. This file is
intended to be used as a complement and does not form an integral part of the publication.
---------------------- Page: 9 ----------------------
SIST EN IEC 60904-3:2019
– 4 – IEC 60904-3:2019 © IEC 2019
The text of this International Standard is based on the following documents:
CDV Report on voting
82/1342/CDV 82/1425/RVC
Full information on the voting for the approval of this International Standard can be found in
the report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of the IEC 60904 series, published under the general title Photovoltaic
devices, can be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
---------------------- Page: 10 ----------------------
SIST EN IEC 60904-3:2019
IEC 60904-3:2019 © IEC 2019 – 5 –
PHOTOVOLTAIC DEVICES –
Part 3: Measurement principles for terrestrial photovoltaic (PV)
solar devices with reference spectral irradiance data
1 Scope
This part of IEC 60904 applies to the following photovoltaic devices for terrestrial applications:
– solar cells with or without a protective cover;
– sub-assemblies of solar cells;
– modules; and
– systems.
NOTE The term “test specimen” is used to denote any of these devices.
The principles contained in this document cover testing in both natural and simulated sunlight.
Photovoltaic conversion is spectrally selective due to the nature of the semiconductor
materials used in PV solar cells and modules. To compare the relative performance of
different PV devices and materials a reference standard solar spectral distribution is
necessary. This document includes such a reference solar spectral irradiance distribution.
This document also describes basic measurement principles for determining the electrical
output of PV devices. The principles given in this document are designed to relate the
performance rating of PV devices to a common reference terrestrial solar spectral irradiance
distribution.
The reference terrestrial solar spectral irradiance distribution is given in this document in
order to classify solar simulators according to the spectral performance requirements
contained in IEC 60904-9.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their
content constitutes requirements of this document. For dated references, only the edition
cited applies. For undated references, the latest edition of the referenced document (including
any amendments) applies.
IEC 60891, Photovoltaic devices – Procedures for temperature and irradiance corrections to
measured I-V characteristics
IEC 60904-1, Photovoltaic devices – Part 1: Measurement of photovoltaic current-voltage
characteristics
IEC 60904-2, Photovoltaic devices – Part 2: Requirements for photovoltaic reference devices
IEC 60904-5, Photovoltaic devices – Part 5: Determination of the equivalent cell temperature
(ECT) of photovoltaic (PV) devices by the open-circuit voltage method
IEC 60904-7, Photovoltaic devices – Part 7: Computation of the spectral mismatch correction
for measurements of photovoltaic devices
---------------------- Page: 11 ----------------------
SIST EN IEC 60904-3:2019
– 6 – IEC 60904-3:2019 © IEC 2019
IEC 60904-8, Photovoltaic devices – Part 8: Measurement of spectral responsivity of a
photovoltaic (PV) device
IEC 60904-9, Photovoltaic devices – Part 9: Solar simulator performance requirements
IEC 61853-4, Photovoltaic (PV) module performance testing and energy rating - Part 4:
Standard reference climatic profiles
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following
addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
4 Measurement principles
In current practice the photovoltaic performance of a solar cell or module is determined by
exposing it at a known temperature to stable sunlight, natural or simulated, and measuring its
current-voltage (I-V) characteristic curve while measuring the magnitude of both the incident
irradiance and the PV device temperature. Detailed I-V curve measurement procedures are
included in IEC 60904-1. The measured performances can then be corrected to standard test
conditions (STC) or other desired conditions of irradiance and temperature according to
IEC 60891. The corrected power output at the maximum power voltage and STC is commonly
referred to as the rated power.
Incident irradiance can be measured by means of a PV reference device (whose spectral
responsivity shall be known) or, if measuring under natural sunlight, by means of a
thermopile-type irradiance detector (pyranometer). If a PV reference device is used, it shall
satisfy the requirements specified in IEC 60904-2. Temperature determination of the PV
device under test shall be made according to IEC 60904-1 or IEC 60904-5.
Since a solar cell has a wavelength-dependent responsivity, its performance is significantly
affected by the spectral distribution of the incident radiation, which in natural sunlight varies
with factors such as location, weather, time of year, time of day, orientation of the receiving
surface, etc., and with a simulator varies with its type and conditions of use according to
IEC 60904-9. Regardless of whether the irradiance is measured with either a thermopile-type
radiometer (that is not spectrally selective) or with a reference solar device, the spectral
irradiance distribution of the incoming light shall be known in order to use IEC 60904-7 to
calculate the spectral mismatch between the measured performance and the predicted
performance under the global or direct reference solar spectral distribution defined in this
document. When performing measurements according to the standard test conditions, the
spectral mismatch between the PV device under test and the thermopile is usually much
larger than the spectral mismatch between the PV reference device and the PV device under
test.
When the spectral responsivity of the PV device is known as determined according to
IEC 60904-8, it is also possible to use IEC 60904-7 to compute the performance of that PV
device when exposed to light of any known spectral irradiance distribution.
5 Reference solar spectral and angular irradiance distribution
The reference solar spectral distributions are given in Table 1 and Figure 1.
---------------------- Page: 12 ----------------------
SIST EN IEC 60904-3:2019
IEC 60904-3:2019 © IEC 2019 – 7 –
The reference angular distribution is defined for both, the direct and the global spectral
distribution, so that the complete radiation hits the solar device perpendicularly under normal
incidence. Other, more realistic geometrical and ambient conditions for different climate zones
are defined in IEC 61853-4.
The calculation of the spectral distributions was done using the following geometrical and
environmental input parameters:
– global distribution (direct + diffuse + albedo) of sunlight (AM1.5 spectrum), corresponding
–2
to an integrated irradiance of 1 000 W·m incident on a sun-facing plane surface tilted at
37º to the horizontal, and
– the direct distribution of sunlight (AM1.5d spectrum), corresponding to an integrated
–2
irradiance of 900 W·m incident on a sun-facing plane surface perpendicular to the
incident sunlight,
considering the wavelength-dependent albedo of a light bare soil, under the following
atmospheric conditions:
– U.S. standard atmosphere with CO concentration increased to current level (370 ppm), a
2
rural aerosol model, and no pollution;
– precipitable water: 1,416 4 cm;
– ozone content: 0,343 8 atm-cm (or 343,8 DU);
– turbidity (aerosol optical depth): 0,084 at 500 nm;
– pressure: 101,325 kPa (i.e. sea level).
Data contained in Table 1 have been generated using the solar spectral model SMARTS,
Version 2.9.2. A general description of this model and its suitability to reproduce actual solar
spectral irradiance distributions can be found in “Proposed Reference Irradiance Spectra for
1
Solar Energy Systems Testing” by C. A. Gueymard, C. Myers and K. Emery , and in the
references therein. Table 1 can be obtained using the data contained in Annex A as an input
to the model SMARTS Version 2.9.2. The resulting output spectral irradiance values have to
be multiplied by a normalization factor (0,997 1) in order to get an integrated irradiance of
–2
1 000 W·m in the wavelength range 0 to infinity for the global irradiance. This same scaling
–2
factor is applied to the direct spectrum giving an integrated irradiance of 900 W·m in the
wavelength range 0 to infinity.
At the time of publication of this document the SMARTS Version 2.9.2 spectral model code is
available, free of charge, subject to the author's license agreement, at
http://www.nrel.gov/rredc/smarts. A copy of the model, not for distribution purposes, is kept
under IEC TC 82 control.
The contents of Table 1 are included in an attached file in the form of an Excel spreadsheet.
___________
1
C. A. Gueymard, C. Myers and K. Emery, “Proposed Reference Irradiance Spectra for Solar Energy Systems
Testing”, Solar Energy, Vol 73, No. 6, pp. 443-467, 2002.
---------------------- Page: 13 ----------------------
SIST EN IEC 60904-3:2019
– 8 – IEC 60904-3:2019 © IEC 2019
Table 1 – Reference solar spectral irradiance distribution
Wave- Global Global photon Cumulative Direct Direct photon Cumulative
length spectral flux global spectral flux direct
irradiance integrated irradiance integrated
irradiance irradiance
–2 –1 –2 –1 –1 –2 –2 –1 –2 –1 –1 –2
nm W·m ·nm m ·s ·nm W·m W·m ·nm m ·s ·nm W·m
280,0 4,72E-23 6,649E-05 0,00E+00 2,529E-26 3,564E-08 0,000E00
280,5 1,23E-21 1,733E-03 3,19E-22 1,089E-24 1,537E-06 2,785E-25
281,0 5,67E-21 8,025E-03 2,04E-21 6,108E-24 8,640E-06 2,077E-24
281,5 1,56E-19 2,213E-01 4,25E-20 2,740E-22 3,883E-04 7,210E-23
282,0 1,19E-18 1,691E+00 3,79E-19 2,826E-21 4,012E-03 8,472E-22
282,5 4,53E-18 6,443E+00 1,81E-18 1,323E-20 1,882E-02 4,862E-21
283,0 1,84E-17 2,621E+01 7,54E-18 6,745E-20 9,609E-02 2,503E-20
283,5 3,53E-17 5,032E+01 2,10E-17 1,457E-19 2,080E-01 7,832E-20
284,0 7,25E-16 1,036E+03 2,11E-16 4,969E-18 7,105E00 1,357E-18
284,5 2,48E-15 3,550E+03 1,01E-15 2,156E-17 3,088E01 7,990E-18
285,0 7,99E-15 1,146E+04 3,63E-15 8,974E-17 1,287E02 3,581E-17
285,5 4,25E-14 6,107E+04 1,62E-14 6,424E-16 9,232E02 2,188E-16
286,0 1,36E-13 1,964E+05 6,10E-14 2,343E-15 3,374E03 9,653E-16
286,5 8,36E-13 1,205E+06 3,04E-13 1,840E-14 2,654E04 6,152E-15
287,0 2,73E-12 3,942E+06 1,20E-12 7,234E-14 1,045E05 2,884E-14
287,5 1,09E-11 1,573E+07 4,60E-12 3,651E-13 5,284E05 1,382E-13
288,0 6,22E-11 9,011E+07 2,29E-11 2,798E-12 4,056E06 9,290E-13
288,5 1,71E-10 2,485E+08 8,12E-11 9,039E-12 1,313E07 3,888E-12
289,0 5,61E-10 8,162E+08 2,64E-10 3,488E-11 5,074E07 1,487E-11
289,5 2,07E-09 3,015E+09 9,22E-10 1,532E-10 2,233E08 6,189E-11
290,0 6,00E-09 8,758E+09 2,94E-09 5,130E-10 7,490E08 2,285E-10
290,5 1,37E-08 2,010E+10 7,87E-09 1,326E-09 1,940E09 6,883E-10
291,0 3,50E-08 5,120E+10 2,00E-08 3,885E-09 5,691E09 1,991E-09
291,5 1,09E-07 1,597E+11 5,60E-08 1,438E-08 2,111E10 6,558E-09
292,0 2,68E-07 3,932E+11 1,50E-07 4,067E-08 5,978E10 2,032E-08
292,5 4,26E-07 6,267E+11 3,23E-07 7,021E-08 1,034E11 4,804E-08
293,0 8,62E-07 1,272E+12 6,45E-07 1,571E-07 2,318E11 1,049E-07
293,5 2,26E-06 3,345E+12 1,43E-06 4,696E-07 6,938E11 2,616E-07
294,0 4,16E-06 6,160E+12 3,03E-06 9,428E-07 1,395E12 6,147E-07
294,5 6,57E-06 9,743E+12 5,72E-06 1,592E-06 2,360E12 1,248E-06
295,0 1,23E-05 1,820E+13 1,04E-05 3,215E-06 4,775E12 2,450E-06
295,5 2,77E-05 4,127E+13 2,04E-05 7,997E-06 1,190E13 5,253E-06
296,0 4,78E-05 7,117E+13 3,93E-05 1,469E-05 2,190E13 1,093E-05
296,5 7,11E-05 1,062E+14 6,90E-05 2,324E-05 3,469E13 2,041E-05
297,0 9,65E-05 1,443E+14 1,11E-04 3,309E-05 4,947E13 3,449E-05
297,5 1,86E-04 2,779E+14 1,81E-04 6,772E-05 1,014E14 5,970E-05
298,0 2,89E-04 4,336E+14 3,00E-04 1,109E-04 1,664E14 1,044E-04
298,5 3,57E-04 5,362E+14 4,62E-04 1,423E-04 2,138E14 1,677E-04
299,0 4,91E-04 7,386E+14 6,73E-04 2,026E-04 3,050E14 2,539E-04
299,5 8,58E-04 1,294E+15 1,01E-03 3,728E-04 5,620E14 3,978E-04
---------------------- Page: 14 ----------------------
SIST EN IEC 60904-3:2019
IEC 60904-3:2019 © IEC 2019 – 9 –
Wave- Global Global photon Cumulative Direct Direct photon Cumulative
length spectral flux global spectral flux direct
irradiance integrated irradiance integrated
irradiance irradiance
–2 –1 –2 –1 –1 –2 –2 –1 –2 –1 –1 –2
nm W·m ·nm m ·s ·nm W·m W·m ·nm m ·s ·nm W·m
300,0 0,0010 1,537E+15 0,00 4,550E-04 6,871E14 0,00
300,5 0,0012 1,878E+15 0,00 5,704E-04 8,629E14 0,00
301,0 0,0019 2,916E+15 0,00 9,166E-04 1,389E15 0,00
301,5 0,0027 4,073E+15 0,00 1,316E-03 1,998E15 0,00
302,0 0,0029 4,428E+15 0,01 1,453E-03 2,209E15 0,00
302,5 0,0043 6,505E+15 0,01 2,185E-03 3,327E15 0,00
303,0 0,0071 1,079E+16 0,01 3,722E-03 5,678E15 0,00
303,5 0,0090 1,368E+16 0,01 4,790E-03 7,319E15 0,01
304,0 0,0094 1,445E+16 0,02 5,083E-03 7,778E15 0,01
304,5 0,0119 1,827E+16 0,02 6,449E-03 9,885E15 0,01
305,0 0,0164 2,520E+16 0,03 8,908E-03 1,368E16 0,02
305,5 0,0187 2,870E+16 0,04 1,016E-02 1,562E16 0,02
306,0 0,0185 2,853E+16 0,05 1,012E-02 1,559E16 0,03
306,5 0,0210 3,247E+16 0,06 1,153E-02 1,780E16 0,03
307,0 0,0278 4,291E+16 0,07 1,520E-02 2,349E16 0,04
307,5 0,0355 5,500E+16 0,09 1,941E-02 3,005E16 0,05
308,0 0,0377 5,850E+16 0,11 2,069E-02 3,208E16 0,06
308,5 0,0413 6,415E+16 0,13 2,268E-02 3,523E16 0,07
309,0 0,0404 6,287E+16 0,15 2,223E-02 3,458E16 0,08
309,5 0,0432 6,728E+16 0,17 2,360E-02 3,677E16 0,09
310,0 0,0508 7,926E+16 0,19 2,775E-02 4,330E16 0,10
310,5 0,0653 1,021E+17 0,22 3,577E-02 5,592E16 0,12
311,0 0,0827 1,294E+17 0,26 4,526E-02 7,086E16 0,14
311,5 0,0838 1,315E+17 0,30 4,602E-02 7,217E16 0,16
312,0 0,0931 1,462E+17 0,34 5,075E-02 7,971E16 0,19
312,5 0,0987 1,553E+17 0,39 5,361E-02 8,434E16 0,21
313,0 0,1070 1,686E+17 0,44 5,815E-02 9,163E16 0,24
313,5 0,1073 1,693E+17 0,49 5,883E-02 9,284E16 0,27
314,0 0,1193 1,886E+17 0,55 6,508E-02 1,029E17 0,30
314,5 0,1302 2,062E+17 0,61 7,027E-02 1,113E17 0,33
315,0 0,1359 2,154E+17 0,68 7,347E-02 1,165E17 0,37
315,5 0,1180 1,875E+17 0,74 6,464E-02 1,027E17 0,40
316,0 0,1231 1,959E+17 0,80 6,689E-02 1,064E17 0,44
316,5 0,1499 2,389E+17 0,87 8,088E-02 1,289E17 0,47
317,0 0,1711 2,730E+17 0,95 9,275E-02 1,480E17 0,52
317,5 0,1819 2,908E+17 1,04 9,942E-02 1,589E17 0,57
318,0 0,1754 2,808E+17 1,13 9,554E-02 1,529E17 0,61
318,5 0,1854 2,972E+17 1,22 9,976E-02 1,599E17 0,66
319,0 0,2041 3,278E+17 1,32 1,094E-01 1,757E17 0,72
319,5 0,1953 3,142E+17 1,42 1,066E-01 1,715E17 0,77
320,0 0,2047 3,297E+17 1,52 1,124E-01 1,811E17 0,82
---------------------- Page: 15 ----------------------
SIST EN IEC 60904-3:2019
– 10 – IEC 60904-3:2019 © IEC 2019
Wave- Global Global photon Cumulative Direct Direct photon Cumulative
length spectral flux global spectral flux direct
irradiance integrated irradiance integrated
irradiance irradiance
–2 –1 –2 –1 –1 –2 –2 –1 –2 –1 –1 –2
nm W·m ·nm m ·s ·nm W·m W·m ·nm m ·s ·nm W·m
320,5 0,2445 3,945E+17 1,63 1,327E-01 2,140E17 0,89
321,0 0,2495 4,032E+17 1,75 1,338E-01 2,161E17 0,95
321,5 0,2377 3,848E+17 1,88 1,278E-01 2,068E17 1,02
322,0 0,2214 3,589E+17 1,99 1,216E-01 1,972E17 1,08
322,5 0,2165 3,514E+17 2,10 1,194E-01 1,938E17 1,14
323,0 0,2116 3,441E+17 2,21 1,159E-01 1,884E17 1,20
323,5 0,2479 4,037E+17 2,32 1,335E-01 2,175E17 1,26
324,0 0,2746 4,478E+17 2,45 1,481E-01 2,415E17 1,33
324,5 0,2824 4,613E+17 2,59 1,542E-01 2,519E17 1,41
325,0 0,2781 4,550E+17 2,73 1,546E-01 2,529E17 1,49
325,5 0,3234 5,299E+17 2,88 1,788E-01 2,930E17 1,57
326,0 0,3801 6,238E+17 3,06 2,081E-01 3,415E17 1,67
326,5 0,4060 6,674E+17 3,25 2,210E-01 3,632E17 1,77
327,0 0,3969 6,534E+17 3,45 2,177E-01 3,584E17 1,88
327,5 0,3835 6,323E+17 3,65 2,122E-01 3,499E17 1,99
328,0 0,3501 5,781E+17 3,83 1,972E-01 3,255E17 2,09
328,5 0,3706 6,128E+17 4,01 2,062E-01 3,409E17 2,19
329,0 0,4211 6,975E+17 4,21 2,323E-01 3,847E17 2,30
329,5 0,46
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.