SIST EN 62041:2004
(Main)Power transformers, power supply units, reactors and similar products - EMC requirements
Power transformers, power supply units, reactors and similar products - EMC requirements
This international product family standard applies to independent transformers, reactors and power supply units covered by EN 60989 and the EN 61558 series of standards. It prescribes the electromagnetic compatibility requirements for emission and immunity in the frequency range 0 Hz to 1 000 MHz.
Sicherheit von Transformatoren, Netzgeräten, Drosseln und dergleichen - EMV-Anforderungen
Transformateurs, blocs d'alimentation, bobines d'inductance et produits analogues - Prescriptions CEM
La présente Norme internationale de famille de produits s'applique aux transformateurs, bobines d'inductance et blocs d'alimentation indépendants couverts par la EN 60989 et la série de normes EN 61558. Elle précise les prescriptions de compatibilité électromagnétique pour l'émission et l'immunité dans la bande de fréquences 0 Hz à 1 000 MHz.
Power transformers, power supply units, reactors and similar products - EMC requirements
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 62041:2004
STANDARD
junij 2004
Power transformers, power supply units, reactors and similar products - EMC
requirements
ICS 29.180; 33.100.01 Referenčna številka
SIST EN 62041:2004(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 62041
NORME EUROPÉENNE
EUROPÄISCHE NORM November 2003
ICS 29.180; 33.100
English version
Power transformers, power supply units,
reactors and similar products –
EMC requirements
(IEC 62041:2003)
Transformateurs, blocs d'alimentation, Sicherheit von Transformatoren,
bobines d'inductance et produits Netzgeräten, Drosseln und dergleichen –
analogues – EMV-Anforderungen
Prescriptions CEM (IEC 62041:2003)
(CEI 62041:2003)
This European Standard was approved by CENELEC on 2003-10-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62041:2003 E
---------------------- Page: 2 ----------------------
EN 62041:2003 - 2 -
Foreword
The text of document 96/198/FDIS, future edition 1 of IEC 62041, prepared by IEC TC 96, Small
power transformers, reactors, power supply units and similar products, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 62041 on 2003-10-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-10-01
This standard is only intended to be used for products covered by product safety standards of
IEC Technical Committee 96: the IEC 61558 series (harmonized as EN 61558) and IEC 60989.
In this standard, the following print types are used:
- requirements proper: in roman type;
- test specifications: in italic type;
- explanatory matter: in smaller roman type.
__________
Endorsement notice
The text of the International Standard IEC 62041:2003 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60065 NOTE Harmonized as EN 60065:2002 (modified).
IEC 60601-1 NOTE Harmonized as EN 60601-1:1990 (not modified).
IEC 60950 NOTE Harmonized in EN 60950 series (partly modified).
IEC 61010-1 NOTE Harmonized as EN 61010-1:2001 (not modified).
IEC 61347-1 NOTE Harmonized as EN 61347-1:2001 (not modified).
IEC 61347-2-2 NOTE Harmonized as EN 61347-2-2:2001 (not modified).
IEC 62040 NOTE Harmonized in EN 62040 series (partly modified).
__________
---------------------- Page: 3 ----------------------
- 3 - EN 62041:2003
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1)
IEC 60989 - Separating transformers, - -
autotransformers, variable transformers
and reactors
1)
2)
IEC 61000-3-2 - Electromagnetic compatibility (EMC) EN 61000-3-2 2000
(mod) Part 3-2: Limits - Limits for harmonic
current emissions (equipment input
current up to and including 16 A per
phase)
1)
IEC/TS 61000-3-4 - Part 3-4: Limits - Limitation of emission - -
of harmonic currents in low-voltage
power supply systems for equipment
with rated current greater than 16 A
1) 2)
IEC 61000-4-2 - Part 4-2: Testing and measurement EN 61000-4-2 1995
techniques - Electrostatic discharge
immunity test
1) 2)
IEC 61000-4-3 - Part 4-3: Testing and measurement EN 61000-4-3 2002
techniques - Radiated, radio-frequency,
electromagnetic field immunity test
1) 2)
IEC 61000-4-4 - Part 4-4: Testing and measurement EN 61000-4-4 1995
techniques - Electrical fast
transient/burst immunity test
1) 2)
IEC 61000-4-5 - Part 4-5: Testing and measurement EN 61000-4-5 1995
techniques - Surge immunity test
1)
IEC 61000-4-6 - Part 4-6: Testing and measurement - -
techniques - Immunity to conducted
disturbances, induced by radio-
frequency fields
1)
Undated reference.
2)
Valid edition at date of issue.
---------------------- Page: 4 ----------------------
EN 62041:2003 - 4 -
Publication Year Title EN/HD Year
2)
IEC 61000-4-11 1994 Part 4-11: Testing and measurement EN 61000-4-11 1994
techniques - Voltage dips, short
interruptions and voltage variations
immunity tests
IEC 61558 Series Safety of power transformers, power EN 61558 Series
supply units and similar
CISPR 11 2003 Industrial scientific and medical (ISM) - -
radio-frequency equipment -
Electromagnetic disturbance
characteristics - Limits and methods of
measurement
---------------------- Page: 5 ----------------------
NORME CEI
INTERNATIONALE IEC
62041
INTERNATIONAL
Première édition
STANDARD
First edition
2003-08
Transformateurs, blocs d'alimentation,
bobines d'inductance et produits analogues –
Prescriptions CEM
Power transformers, power supply units,
reactors and similar products –
EMC requirements
© IEC 2003 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
N
Commission Electrotechnique Internationale PRICE CODE
International Electrotechnical Commission
ɆɟɠɞɭɧɚɪɨɞɧɚɹɗɥɟɤɬɪɨɬɟɯɧɢɱɟɫɤɚɹɄɨɦɢɫɫɢɹ
Pour prix, voir catalogue en vigueur
For price, see current catalogue
---------------------- Page: 6 ----------------------
62041¤ IEC:2003 – 3 –
CONTENTS
FOREWORD . 5
1 Scope . 9
2 Normative references. 9
3 Terms and definitions.11
4 Classification .13
5 Test specifications .13
5.1 Immunity.13
5.1.1 Immunity against disturbances .13
5.1.2 Test levels .17
5.2 Emission.21
5.2.1 Categories .21
5.2.2 Test levels .23
6 Specification of environment .25
Bibliography .27
Table 1 – Electrostatic discharges – Test levels at enclosure .17
Table 2 – Radiated, radio frequency electromagnetic field – Test levels at enclosure.17
Table 3 – Electrical fast transient/burst – Test levels at ports for signal and control lines
and earth.19
Table 4 – Electrical fast transient/burst – Test levels at input and output d.c. and a.c.
power ports .19
Table 5 – Conducted disturbances, inducted by radio-frequency fields –Test levels at ports
for signal lines, control lines, earth and input and output at d.c. and a.c. power ports.19
Table 6 – Surge – Test levels at input and output a.c. power ports .21
Table 7 – Voltage dips and short interruptions – Test levels at input a.c. power ports .21
Table 8 – Conducted radio disturbances – Test levels at input a.c. power ports.23
Table 9 – Radiated radio disturbances – Test levels at enclosure.25
---------------------- Page: 7 ----------------------
62041¤ IEC:2003 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
POWER TRANSFORMERS, POWER SUPPLY UNITS, REACTORS
AND SIMILAR PRODUCTS –
EMC requirements
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to
technical committees; any IEC National Committee interested in the subject dealt with may participate in this
preparatory work. International, governmental and non-governmental organizations liaising with the IEC also
participate in this preparation. IEC collaborates closely with the International Organization for Standardization
(ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International standard IEC 62041 has been prepared by Technical Committee 96: Small power
transformers, reactors, power supply units and similar products.
This EMC standard covers only EMC aspects and is not a safety standard.
The text of this standard is based upon the following documents:
FDIS Report on voting
96/198/FDIS 96/210/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
---------------------- Page: 8 ----------------------
62041¤ IEC:2003 – 7 –
This standard is only intended to be used for products covered by product safety standards of
IEC technical committee 96: the IEC 61558 series and IEC 60989.
In this standard, the following print types are used:
– requirements proper: in roman type;
– test specifications: in italic type;
– explanatory matter: in smaller roman type.
The committee has decided that the contents of this publication will remain unchanged until
2007. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
---------------------- Page: 9 ----------------------
62041¤ IEC:2003 – 9 –
POWER TRANSFORMERS, POWER SUPPLY UNITS, REACTORS
AND SIMILAR PRODUCTS –
EMC requirements
1 Scope
This international product family standard applies to independent transformers, reactors and
power supply units covered by IEC 60989 and the IEC 61558 series of standards. It prescribes
the electromagnetic compatibility requirements for emission and immunity in the frequency
range 0 Hz to 1 000 MHz.
Transformers, reactors and power supply units delivered with or incorporated in an appliance
or equipment shall comply with the relevant EMC standard applicable to that appliance or
equipment. However this standard may be used as a guide to test the transformers, reactors
and power supply units separately before incorporating them in the appliance or equipment.
This EMC standard covers only performance. Abnormal operation of the transformer, reactor
and power supply unit (e.g. simulated faults in the electric circuitry for testing purposes or
functional safety by influence of electromagnetic phenomena) are not taken into consideration
in this standard.
NOTE When the term transformer is used, it covers transformers, reactors and power supplies where applicable.
This standard does not apply to:
– motor-generator sets;
– uninterruptible power supplies (UPS) covered by IEC 62040;
– power supply units covered by IEC 61204, (i.e. DC-DC converters, DC power and
distribution equipment and power supply units for use in applications covered by
IEC 60950, IEC 61010-1, IEC 60601-1 and IEC 60065);
– step-down converters covered by IEC61347-1 and 61347-2-2;
– power supplies and converters for use with or in products covered by IEC 61347-2-2.
2 Normative references
The following referenced documents are indispensable for the application of this document. For
dated references, only the edition cited applies. For undated references, the latest edition of
the referenced document (including any amendments) applies.
IEC 60989, Separating transformers, autotransformers, variable transformers and reactors
IEC 61000-3-2, Electro
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.