SIST-TS CEN ISO/TS 7127:2025
(Main)Light and lighting - Building information modelling properties for lighting - Lighting systems (ISO/TS 7127:2023)
Light and lighting - Building information modelling properties for lighting - Lighting systems (ISO/TS 7127:2023)
This technical specification identifies and clarifies lighting properties for digital building design and maintenance.
This document provides all the needed properties to design and to describe lighting systems. These properties are intended to be used for mapping between data providers and requesters. The mapping of the identifiers enables the exchange of luminaire and sensing device data within different databases.
The unambiguous mapping and description of properties improves the data quality, reduces misinterpretations and the processing time in digital environments. Therefore, the properties listed in this document establish the essential description of lighting systems in BIM systems and databases.
The listed properties in this document are used to structure the product data sheet which is complemented with real product information.
Licht und Beleuchtung - BIM‑Merkmale für die Beleuchtung - Beleuchtungssysteme (ISO/TS 7127:2023)
Diese technische Spezifikation bestimmt Beleuchtungsmerkmale für die digitale Gebäudeplanung und instandhaltung und legt diese genauer dar.
Dieses Dokument liefert alle erforderlichen Merkmale zur Planung und Beschreibung von Beleuchtungs-systemen. Diese Merkmale sollen der Zuordnung zwischen Datenbereitstellern und anforderern dienen. Die Zuordnung der Identifikatoren ermöglicht den Austausch von Leuchten- und Sensordaten innerhalb unterschiedlicher Datenbanken.
Die eindeutige Zuordnung und Beschreibung von Merkmalen verbessert die Datenqualität, verringert Fehlinterpretationen und reduziert die Verarbeitungsdauer in digitalen Umgebungen. Daher legen die in diesem Dokument aufgeführten Merkmale die wesentliche Beschreibung von Beleuchtungssystemen in BIM Systemen und Datenbanken fest.
Die in diesem Dokument aufgeführten Merkmale werden zur Strukturierung des Produktdatenblatts verwendet, das mit echten Produktinformationen ergänzt wird.
Lumière et éclairage - Propriétés de modélisation des informations de la construction pour l'éclairage - Systèmes d'éclairage (ISO/TS 7127:2023)
La présente spécification technique identifie et clarifie les propriétés de l’éclairage pour la conception et la maintenance numériques des bâtiments.
Le présent document fournit toutes les propriétés nécessaires à la conception et à la description des systèmes d’éclairage. Ces propriétés sont destinées à être utilisées pour la mise en correspondance entre les fournisseurs et demandeurs de données. La mise en correspondance des identifiants permet l’échange de données concernant les luminaires et les capteurs entre différentes bases de données.
La mise en correspondance et la description des propriétés, lorsqu’elles sont dépourvues d’ambiguïtés, améliorent la qualité des données, réduisent les erreurs d’interprétation et raccourcissent le temps de traitement dans les environnements numériques. Par conséquent, les propriétés énumérées dans le présent document établissent la description essentielle des systèmes d’éclairage dans les systèmes et bases de données BIM.
Les propriétés énumérées dans le présent document servent à structurer la fiche technique du produit en la complétant d’informations réelles sur les produits.
Svetloba in razsvetljava - Informacijsko modeliranje gradenj za lastnosti razsvetljave - Sistemi razsvetljave (ISO/TS 7127:2023)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2025
Svetloba in razsvetljava - Informacijsko modeliranje gradenj za lastnosti
razsvetljave - Sistemi razsvetljave (ISO/TS 7127:2023)
Light and lighting - Building information modelling properties for lighting - Lighting
systems (ISO/TS 7127:2023)
Licht und Beleuchtung - BIM‑Merkmale für die Beleuchtung - Beleuchtungssysteme
(ISO/TS 7127:2023)
Lumière et éclairage - Propriétés de modélisation des informations de la construction
pour l'éclairage - Systèmes d'éclairage (ISO/TS 7127:2023)
Ta slovenski standard je istoveten z: CEN ISO/TS 7127:2024
ICS:
35.240.67 Uporabniške rešitve IT v IT applications in building
gradbeništvu and construction industry
91.160.01 Razsvetljava na splošno Lighting in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
CEN ISO/TS 7127
TECHNICAL SPECIFICATION
SPÉCIFICATION TECHNIQUE
October 2024
TECHNISCHE SPEZIFIKATION
ICS 35.240.67 Supersedes CEN/TS 17623:2021
English Version
Light and lighting - Building information modelling
properties for lighting - Lighting systems (ISO/TS
7127:2023)
Lumière et éclairage - Propriétés de modélisation des Licht und Beleuchtung - BIM-Merkmale für die
informations de la construction pour l'éclairage - Beleuchtung - Beleuchtungssysteme (ISO/TS
Systèmes d'éclairage (ISO/TS 7127:2023) 7127:2023)
This Technical Specification (CEN/TS) was approved by CEN on 30 September 2024 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TS 7127:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
The text of ISO/TS 7127:2023 has been prepared by Technical Committee ISO/TC 274 "Light and
lighting” of the International Organization for Standardization (ISO) and has been taken over as
which is held by DIN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes CEN/TS 17623:2021.
17623:2021:
— Title changed to “Light and lighting — Building information modelling properties for lighting —
Lighting systems”;
— For some properties names were changed, descriptions improved, and examples added;
however, all properties keep the same GUID and ID to preserve compatibility;
— New properties added in Table 1 to Table 8;
— New Table 9 with environmental properties of lighting systems.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO/TS 7127:2023 has been approved by CEN as CEN ISO/TS 7127:2024 without any
modification.
TECHNICAL ISO/TS
SPECIFICATION 7127
First edition
2023-08
Light and lighting — Building
information modelling properties for
lighting — Lighting systems
Lumière et éclairage — Propriétés de modélisation des informations
de la construction pour l'éclairage — Systèmes d'éclairage
Reference number
ISO/TS 7127:2023(E)
ISO/TS 7127:2023(E)
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO/TS 7127:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principal structure . 2
4.1 General . 2
4.2 Detailed description of set of attributes . 2
4.2.1 General . 2
4.2.2 GUID . 3
4.2.3 ID . 3
4.2.4 Name . 3
4.2.5 Description . 3
4.2.6 Symbol . 3
4.2.7 Format, Unit . 3
4.2.8 Value set . 3
4.2.9 Examples . 4
4.3 Further IT-related attributes . 4
5 Properties for lighting systems . 5
Bibliography .58
iii
ISO/TS 7127:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 274, Light and Lighting.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
ISO/TS 7127:2023(E)
Introduction
Building information modelling (BIM) is a concurrent process that gives engineering and construction
professionals the tools to more efficiently plan, construct, and manage buildings and infrastructure.
Within standardisation committees much work is being performed to define the fundamental principles
of BIM that will allow this to happen in an effective and consistent manner.
For lighting applications, it is essential that this work is monitored and where required input is made to
ensure that the requirements for lighting applications are considered.
v
TECHNICAL SPECIFICATION ISO/TS 7127:2023(E)
Light and lighting — Building information modelling
properties for lighting — Lighting systems
1 Scope
This technical specification identifies and clarifies lighting properties for digital building design and
maintenance.
This document provides all the needed properties to design and to describe lighting systems. These
properties are intended to be used for mapping between data providers and requesters. The mapping
of the identifiers enables the exchange of luminaire and sensing device data within different databases.
The unambiguous mapping and description of properties improves the data quality, reduces
misinterpretations and the processing time in digital environments. Therefore, the properties listed
in this d
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.