iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

oSIST prEN ISO 15614-6:2021

(Main)

Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 6: Arc and gas welding of copper and its alloys (ISO/DIS 15614-6:2021)

Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 6: Arc and gas welding of copper and its alloys (ISO/DIS 15614-6:2021)

Anforderung und Qualifizierung von Schweißverfahren für metallische Werkstoffe - Schweißverfahrensprüfung - Teil 6: Lichtbogen- und Gasschweißen von Kupfer und seinen Legierungen (ISO/DIS 15614 6:2021)

Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques - Épreuve de qualification d'un mode opératoire de soudage - Partie 6: Soudage à l'arc et aux gaz du cuivre et de ses alliages (ISO/DIS 15614-6:2021)

Popis in kvalifikacija varilnih postopkov za kovinske materiale - Preskus varilnega postopka - 6. del: Obločno in plamensko varjenje bakra in njegovih zlitin (ISO/DIS 15614-6:2021)

General Information

Status
Not Published
Public Enquiry End Date
01-Dec-2021
ICS
25.160.10 - Welding processes
77.120.30 - Copper and copper alloys
Technical Committee
VAR - Welding
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
19-Sep-2024
Due Date
24-Sep-2024
Completion Date
19-Sep-2024
Ref Project
prEN ISO 15614-6 - Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 6: Arc and gas welding of copper and its alloys (ISO/DIS 15614-6:2021)

Relations

Revised
SIST EN ISO 15614-6:2006 - Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 6: Arc and gas welding of copper and its alloys (ISO 15614-6:2006)
Effective Date
01-Nov-2021

Buy Standard

prEN ISO 15614-6:2021prEN ISO 15614-6:2021
PreviousNext
Draft
prEN ISO 15614-6:2021
English language
31 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-november-2021
Popis in kvalifikacija varilnih postopkov za kovinske materiale - Preskus varilnega
postopka - 6. del: Obločno in plamensko varjenje bakra in njegovih zlitin (ISO/DIS
15614-6:2021)
Specification and qualification of welding procedures for metallic materials - Welding
procedure test - Part 6: Arc and gas welding of copper and its alloys (ISO/DIS 15614-
6:2021)
Anforderung und Qualifizierung von Schweißverfahren für metallische Werkstoffe -
Schweißverfahrensprüfung - Teil 6: Lichtbogen- und Gasschweißen von Kupfer und
seinen Legierungen (ISO/DIS 15614 6:2021)
Descriptif et qualification d'un mode opératoire de soudage pour les matériaux
métalliques - Épreuve de qualification d'un mode opératoire de soudage - Partie 6:
Soudage à l'arc et aux gaz du cuivre et de ses alliages (ISO/DIS 15614-6:2021)
Ta slovenski standard je istoveten z: prEN ISO 15614-6
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
77.120.30 Baker in bakrove zlitine Copper and copper alloys
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT INTERNATIONAL STANDARD
ISO/DIS 15614-6
ISO/TC 44/SC 10 Secretariat: DIN
Voting begins on: Voting terminates on:
2021-09-09 2021-12-02
Specification and qualification of welding procedures for
metallic materials — Welding procedure test —
Part 6:
Arc and gas welding of copper and its alloys
Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques — Épreuve de
qualification d'un mode opératoire de soudage —
Partie 6: Soudage à l'arc et aux gaz du cuivre et de ses alliages
ICS: 25.160.10
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 15614-6:2021(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2021

ISO/DIS 15614-6:2021(E)
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved

ISO/DIS 15614-6:2021(E)
Contents Page
Foreword .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions .2
4 Welding processes .2
5 Preliminary welding procedure specification (pWPS) .2
6 Welding procedure test .3
7 Test pieces .3
7.1 General . 3
7.2 Shape and dimensions of test pieces . 3
7.2.1 General. 3
7.2.2 Butt joint in plate with full penetration . 3
7.2.3 Butt weld between plates with raised edges . 3
7.2.4 Butt joint in pipe with full penetration . 3
7.2.5 T-joint. 5
7.2.6 Branch connection . . 6
7.3 Welding of test pieces . 6
8 Examination and testing of test pieces .7
8.1 Extent of testing . 7
8.2 Location and taking of test specimens . 8
8.3 Non-destructive testing . 8
8.4 Destructive testing .12
8.4.1 General.12
8.4.2 Transverse tensile test .12
8.4.3 Bend test .12
8.4.4 Macroscopic examination .13
8.4.5 Fracture testing .13
8.5 Acceptance levels .13
8.6 Re-testing .14
9 Range of qualification .14
9.1 General .14
9.2 Related to the manufacturer .14
9.3 Related to the parent material .14
9.3.1 Parent material grouping .14
9.3.2 Parent material thickness and pipe diameter . .15
9.3.3 Angle of branch connection .16
9.4 Common to all welding procedures .16
9.4.1 Welding process .16
9.4.2 Welding positions . . .16
9.4.3 Type of joint/weld .17
9.4.4 Filler material, designation .17
9.4.5 Type of current .17
9.4.6 Heat input .17
9.4.7 Preheat temperature .17
9.4.8 Interpass temperature .17
9.4.9 Post-weld heat treatment or ageing .17
9.4.10 Initial heat treatment .18
9.5 Specific to processes .18
9.5.1 Process 131 .18
9.5.2 Process 141 .18
9.5.3 Process 15 .18
ISO/DIS 15614-6:2021(E)
9.5.4 Process 311 .18
10 Welding procedure qualification record (WPQR) .18
Annex A (informative) Example of a welding procedure qualification record form (WPQR) .20
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2014/68/EU (PED) aimed to be covered .24
Annex ZB (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2014/29/EU (SPVD) aimed to be covered .25
Bibliography .26
iv © ISO 2021 – All rights reserved

ISO/DIS 15614-6:2021(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizati
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 15614-6:2006(Main)
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 6: Arc and gas welding of copper and its alloys (ISO 15614-6:2006)
EN ISO 15614-6:2006

This part of ISO 15614 specifies how a preliminary welding procedure specification is qualified by welding procedure tests. It applies to the arc and gas welding of copper and copper alloys in all product forms. This part of ISO 15614 defines the conditions for the execution of welding procedure tests and the range of qualification for welding procedures for all practical welding operations within the range of variables listed in Clause 9. This part of ISO 15614 is applicable to all new welding procedures. However, it does not invalidate previous welding procedure tests made to former national standards or specifications. Where additional tests have to be carried out to make the qualification technically equivalent, it is only necessary to do the additional tests on a test piece made in accordance with this part of ISO 15614. Additional tests may be required by application standards. The principles of this part of ISO 15614 may be applied to other fusion welding processes.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 9606-3:1999(Main)
Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys (ISO 9606-3:1999)
EN ISO 9606-3:1999

This standard specifies essential requirements, ranges of approval, test conditions, acceptance requirements and certification for the approval testing of welder performance for the welding of copper.  This standard applies to the approval testing of welders for the fusion welding of copper.  This standard is intended to provide the basics for the mutual recognition by examining bodies for approval relating to welders' competence in the various fields of application. Tests will be carried out in accordance with this standard unless more severe tests are specified by the relevant application standard when these are applied.  During the approval test the welder should be required to show adequate practical experience and job knowledge (test non mandatory) of the welding processes, materials and safety requirements for which he is to be approved; information on these aspects is given in Annex A.  This standard is applicable when the welder's approval testing is required by the purchaser, by inspection authorities or by other organizations.  The welding processes referred to in this standard include those fusion welding proceses which are designated as manual or partly mechanized welding. It does not cover fully mechanized and automatic processes (see 5.2).  This standard covers approval testing of welders for work on semi-finished and finished products made from wrought, forged or cast material types listed in 5.4.  The certificate of approval testing is issued under the sole responsibility of the examiner or examining body.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 15614-6:2006(Main)
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 6: Arc and gas welding of copper and its alloys (ISO 15614-6:2006)
EN ISO 15614-6:2006

This part of ISO 15614 specifies how a preliminary welding procedure specification is qualified by welding procedure tests. It applies to the arc and gas welding of copper and copper alloys in all product forms. This part of ISO 15614 defines the conditions for the execution of welding procedure tests and the range of qualification for welding procedures for all practical welding operations within the range of variables listed in Clause 9. This part of ISO 15614 is applicable to all new welding procedures. However, it does not invalidate previous welding procedure tests made to former national standards or specifications. Where additional tests have to be carried out to make the qualification technically equivalent, it is only necessary to do the additional tests on a test piece made in accordance with this part of ISO 15614. Additional tests may be required by application standards. The principles of this part of ISO 15614 may be applied to other fusion welding processes.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 9606-3:1999(Main)
Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys (ISO 9606-3:1999)
EN ISO 9606-3:1999

This standard specifies essential requirements, ranges of approval, test conditions, acceptance requirements and certification for the approval testing of welder performance for the welding of copper.  This standard applies to the approval testing of welders for the fusion welding of copper.  This standard is intended to provide the basics for the mutual recognition by examining bodies for approval relating to welders' competence in the various fields of application. Tests will be carried out in accordance with this standard unless more severe tests are specified by the relevant application standard when these are applied.  During the approval test the welder should be required to show adequate practical experience and job knowledge (test non mandatory) of the welding processes, materials and safety requirements for which he is to be approved; information on these aspects is given in Annex A.  This standard is applicable when the welder's approval testing is required by the purchaser, by inspection authorities or by other organizations.  The welding processes referred to in this standard include those fusion welding proceses which are designated as manual or partly mechanized welding. It does not cover fully mechanized and automatic processes (see 5.2).  This standard covers approval testing of welders for work on semi-finished and finished products made from wrought, forged or cast material types listed in 5.4.  The certificate of approval testing is issued under the sole responsibility of the examiner or examining body.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61084-1:2024(Main)
Cable trunking systems and cable ducting systems for electrical installations - Part 1: General requirements (IEC 61084-1:2017)
EN IEC 61084-1:2024

This part 1 of the EN IEC 61084 series specifies general requirements and tests for cable trunking systems (CTS) and cable ducting systems (CDS) intended for the accommodation, and where necessary for the electrically protective separation, of insulated conductors, cables and possibly other electrical equipment in electrical and/or communication systems installations. The maximum voltage of these installations is 1 000 V AC and 1 500 V DC.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61084-2-2:2024/A11:2024(Amendment)
Cable trunking systems and cable ducting systems for electrical installations - Part 2-2: Particular requirements - Part 2-2: Particular requirements - Cable trunking systems and cable ducting systems intended for mounting underfloor, flushfloor, or onfloor
EN IEC 61084-2-2:2024/A11:2024

Common modifications for the adoption as a European Standard of IEC 61084-2-2:2017 ed 2.0 (PR= 72101).

  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61084-2-1:2024(Main)
Cable trunking systems and cable ducting systems for electrical installations - Part 2-1: Particular requirements - Cable trunking systems and cable ducting systems intended for mounting on walls and ceilings (IEC 61084-2-1:2017)
EN IEC 61084-2-1:2024

This part 2-1 of the EN IEC 61084 series specifies particular requirements and tests for cable trunking systems (CTS) and cable ducting systems (CDS) intended for intended for mounting on walls and ceilings. They can be embedded, installed in a flush or semi-flush state, surface mounted or mounted away from the surface using fixing devices.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61084-2-4:2024(Main)
Cable trunking systems and cable ducting systems for electrical installations - Part 2-4: Particular requirements - Service poles and service posts (IEC 61084-2-4:2017)
EN IEC 61084-2-4:2024

This part 2-4 of the EN IEC 61084 series specifies particular requirements and tests for service poles and service posts intended to be mounted in free space and in contact with mounting surface(s) only at one or two ends, where the word "mounted" means fixed or placed on the floor with a weighted base or linked to a mounting surface through a flexible component.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 18053-1:2024(Main)
Digital Chain of Custody for CBRNE Evidence - Part 1: Overview and Concepts
CEN/TS 18053-1:2024

This document provides guidance for technical and non-technical personnel within the organisation, including those responsible for compliance with statuary and regulatory requirements and industry standards. It provides an overview to the concepts related to the custody transfer lifecycle within the dCoC, framing how such personnel can identify and audit the custody ownership of CBRNE evidence; set policies and follow good practices for metadata governance, and conduct digital operations to ensure the integrity of the data at each custody transfer point. In addition to the metadata required to perform audits, the document also aims to provide:
- Unambiguous definitions of the concepts related to the digital log for each custody transfer (i.e., who owns the custody at each transfer point).
- Guidelines for a dCoC data governance process to ensure the integrity of the DCM and situational-awareness at each transfer point within the dCoC.
- Suggestions regarding metadata management policies and compliance with good practices for non-repudiation digital log, ensuring a standard data structure for data management and auditing
This document is the first part of a series of Technical Specifications on the provision of DCM services for the management of datarelated to the custody of CBRNE evidence. It will be complemented by other specific parts, which give more detailed guidelines for related services, such as the specification of BPMN processes for data governance within the dCoC.

  • Technical specification
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14404-5:2024(Main)
Personal protective equipment - Knee protectors for work in the kneeling position - Part 5: Requirements for knee mats (type 3)
EN 14404-5:2024

This part of the standard specifies the requirements for knee mats (type 3) for use by work in kneeling position.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day