SIST EN ISO 9606-3:1999

Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys (ISO 9606-3:1999)

This standard specifies essential requirements, ranges of approval, test conditions, acceptance requirements and certification for the approval testing of welder performance for the welding of copper.  This standard applies to the approval testing of welders for the fusion welding of copper.  This standard is intended to provide the basics for the mutual recognition by examining bodies for approval relating to welders' competence in the various fields of application. Tests will be carried out in accordance with this standard unless more severe tests are specified by the relevant application standard when these are applied.  During the approval test the welder should be required to show adequate practical experience and job knowledge (test non mandatory) of the welding processes, materials and safety requirements for which he is to be approved; information on these aspects is given in Annex A.  This standard is applicable when the welder's approval testing is required by the purchaser, by inspection authorities or by other organizations.  The welding processes referred to in this standard include those fusion welding proceses which are designated as manual or partly mechanized welding. It does not cover fully mechanized and automatic processes (see 5.2).  This standard covers approval testing of welders for work on semi-finished and finished products made from wrought, forged or cast material types listed in 5.4.  The certificate of approval testing is issued under the sole responsibility of the examiner or examining body.

Prüfung von Schweißern - Schmelzschweißen - Teil 3: Kupfer und Kupferlegierungen (ISO 9606-3:1999)

In dieser Norm werden die wesentlichen Anforderungen, Geltungsbereiche, Prüfbedingungen und Bewertungsanforderungen sowie die Prüfungsbescheinigung über die durchgeführte Prüfung des Schweißers für Kupferschweißungen festgelegt. Diese Norm gilt für die Prüfung von Schweißern für das Schmelzschweißen von Kupfer. Mit dieser Norm ist beabsichtigt, die Grundlage für die gegenseitige Anerkennung von Prüfungen über das Können der Schweißer in den verschiedenen Anwendungsgebieten durch die zuständigen Stellen zu schaffen.

Epreuve de qualification des soudeurs - Soudage par fusion - Partie 3: Cuivre et ses alliages (ISO 9606-3:1999)

La présente norme européenne spécifie les prescriptions essentielles a respecter, les domaines de validité, les conditions de contrôle, d'examen et d'essai, les criteres d'acceptation et de notification des résultats de l'épreuve de qualification de soudeurs sur cuivre. La présente norme européenne s'applique a la qualification des soudeurs pour le soudage par fusion du cuivre. La présente norme européenne a pour but de fournir les bases d'un systeme de reconnaissance mutuelle de la qualification des soudeurs délivrée par les examinateurs dans les divers domaines d'application.

Preskušanje varilcev - Talilno varjenje - 3. del: Baker in bakrove zlitine (ISO 9606-3:1999)

General Information

• Status: Published
• Publication Date: 30-Nov-1999
• ICS: 03.100.30 - Management of human resources
• ICS: 25.160.10 - Welding processes
• ICS: 77.120.30 - Copper and copper alloys
• Technical Committee: VAR - Welding
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Dec-1999
• Due Date: 01-Dec-1999
• Completion Date: 01-Dec-1999
• Directive: 2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: EN ISO 9606-3:1999 - Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys (ISO 9606-3:1999)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 9606-3:1999
01-december-1999
Preskušanje varilcev - Talilno varjenje - 3. del: Baker in bakrove zlitine (ISO 9606-
3:1999)
Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys (ISO
9606-3:1999)
Prüfung von Schweißern - Schmelzschweißen - Teil 3: Kupfer und Kupferlegierungen
(ISO 9606-3:1999)
Epreuve de qualification des soudeurs - Soudage par fusion - Partie 3: Cuivre et ses
alliages (ISO 9606-3:1999)
Ta slovenski standard je istoveten z: EN ISO 9606-3:1999
ICS:
03.100.30 Vodenje ljudi Management of human
resources
25.160.10 Varilni postopki in varjenje Welding processes
77.120.30 Baker in bakrove zlitine Copper and copper alloys
SIST EN ISO 9606-3:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 9606-3:1999

---------------------- Page: 2 ----------------------

SIST EN ISO 9606-3:1999

---------------------- Page: 3 ----------------------

SIST EN ISO 9606-3:1999

---------------------- Page: 4 ----------------------

SIST EN ISO 9606-3:1999

---------------------- Page: 5 ----------------------

SIST EN ISO 9606-3:1999

---------------------- Page: 6 ----------------------

SIST EN ISO 9606-3:1999

---------------------- Page: 7 ----------------------

SIST EN ISO 9606-3:1999

---------------------- Page: 8 -----
...