Textiles - Determination of the resistance of cellulose-containing textiles to micro-organisms - Soil burial test - Part 2: Identification of long-term resistance of a rot retardant finish (ISO 11721:2003)

This European Standard describes a test procedure for identification of the long-term resistance of a rot retardant finish against the attack of microorganisms in the soil.
It allows distinction to be made between rot retardant finishes with no long-term resistance, with regular long-term resistance and with increased long-term resistance, in order to assess the suitability for use in the tropics.
As the soil burial test is a biological process and the test soil not accurately defined, this European Standard only covers the comparison of finished and unfinished specimens.

Textilien - Bestimmung der Widerstandsfähigkeit zellulosehaltiger Textilien gegen Mikroorganismen - Erdeingrabetest - Teil 2: Nachweis der Langzeitbeständigkeit einer verrottungshemmenden Ausrüstung (ISO 11721-2:2003)

Textiles - Détermination de la résistance aux micro-organismes des textiles contenant de la cellulose - Essai d'enfouissement - Partie 2: Identification de la résistance a long terme d'un traitement d'imputrescibilité (ISO 11721-2:2003 )

L'ISO 11721-2:2003 décrit un mode opératoire d'essai permettant d'identifier la résistance à long terme d'un traitement d'imputrescibilité aux attaques des micro-organismes présents dans la terre.
Elle permet de distinguer les traitements d'imputrescibilité ayant une résistance à court terme, ceux ayant une résistance à long terme normale et ceux ayant une résistance à long terme accrue, afin d'évaluer leur aptitude à l'emploi sous les tropiques.
L'essai d'enfouissement étant un processus biologique et la terre utilisée pour l'essai n'étant pas définie avec précision, le contenu de l'ISO 11721-2:2003 constitue uniquement une comparaison entre des éprouvettes traitées et des éprouvettes non traitées.

Tekstilije - Ugotavljanje odpornosti tekstilij, ki vsebujejo celulozo proti mikroorganizmom - Preskus z zakopavanjem v zemljo - 2. del: Prepoznavanje dolgotrajne odpornosti apretur proti gnitju

General Information

Status
Published
Publication Date
30-Nov-2003
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Dec-2003
Due Date
01-Dec-2003
Completion Date
01-Dec-2003

Buy Standard

Standard
SIST EN ISO 11721-2:2003
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11721-2:2003
01-december-2003
Tekstilije - Ugotavljanje odpornosti tekstilij, ki vsebujejo celulozo proti
mikroorganizmom - Preskus z zakopavanjem v zemljo - 2. del: Prepoznavanje
dolgotrajne odpornosti apretur proti gnitju

Textiles - Determination of the resistance of cellulose-containing textiles to micro-

organisms - Soil burial test - Part 2: Identification of long-term resistance of a rot

retardant finish (ISO 11721:2003)

Textilien - Bestimmung der Widerstandsfähigkeit zellulosehaltiger Textilien gegen

Mikroorganismen - Erdeingrabetest - Teil 2: Nachweis der Langzeitbeständigkeit einer

verrottungshemmenden Ausrüstung (ISO 11721-2:2003)

Textiles - Détermination de la résistance aux micro-organismes des textiles contenant de

la cellulose - Essai d'enfouissement - Partie 2: Identification de la résistance a long

terme d'un traitement d'imputrescibilité (ISO 11721-2:2003 )
Ta slovenski standard je istoveten z: EN ISO 11721-2:2003
ICS:
07.100.99 Drugi standardi v zvezi z Other standards related to
mikrobiologijo microbiology
59.080.30 Tkanine Textile fabrics
SIST EN ISO 11721-2:2003 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 11721-2:2003
---------------------- Page: 2 ----------------------
SIST EN ISO 11721-2:2003
EUROPEAN STANDARD
EN ISO 11721-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2003
ICS 07.100.99; 59.080.30
English version
Textiles - Determination of the resistance of cellulose-containing
textiles to micro-organisms - Soil burial test - Part 2:
Identification of long-term resistance of a rot retardant finish
(ISO 11721:2003)

Textiles - Détermination de la résistance aux micro- Textilien - Bestimmung der Widerstandsfähigkeit

organismes des textiles contenant de la cellulose - Essai zellulosehaltiger Textilien gegen Mikroorganismen -

d'enfouissement - Partie 2: Identification de la résistance à Erdeingrabetest - Teil 2: Nachweis der

long terme d'un traitement d'imputrescibilité (ISO 11721- Langzeitbeständigkeit einer verrottungshemmenden

2:2003 ) Ausrüstung (ISO 11721-2:2003)
This European Standard was approved by CEN on 15 May 2003.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

standards may be obtained on application to the Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official

versions.

CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,

Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United

Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels

© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11721-2:2003 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 11721-2:2003
EN ISO 11721-2:2003 (E)
Contents Page

Foreword ............................................................................................................................................................. 3

Introduction ........................................................................................................................................................ 4

1 Scope...................................................................................................................................................... 5

2 Normative references............................................................................................................................ 5

3 Safety precautions and health hazards to operators ........................................................................ 5

4 Principle ................................................................................................................................................. 5

5 Apparatus and reagents ....................................................................................................................... 5

6 Test specimens ..................................................................................................................................... 6

7 Leaching procedure.............................................................................................................................. 6

8 Determination of the degradation activity of the test soil................................................................. 6

9 Procedure............................................................................................................................................... 6

10 Calculation and expression of results ................................................................................................ 7

11 Test report.............................................................................................................................................. 7

---------------------- Page: 4 ----------------------
SIST EN ISO 11721-2:2003
EN ISO 11721-2:2003 (E)
Foreword

This document (EN ISO 11721-2:2003) has been prepared by Technical Committee CEN/TC 248

“Textiles and textile products”, the secretariat of which is held by BSI, in collaboration with Technical

Committee ISO/TC 38 “Textiles”.

This European Standard shall be given the status of a national standard, either by publication of an

identical text or by endorsement, at the latest by April 2004, and conflicting national standards shall

be withdrawn at the latest by April 2004.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to implement this European Standard: Austria, Belgium, Czech

Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg,

Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and the United

Kingdom.
---------------------- Page: 5 ----------------------
SIST EN ISO 11721-2:2003
EN ISO 11721-2:2003 (E)
Introduction

Cellulose containing textiles are considered as resistant against the attack of microorganisms living in

the soil, provided that their structure, appearance and maximum tensile strength have not been

altered essentially after a soil burial test.

The assessment of damage resistance takes into account the structure, the aspect and the changes

in the maximum tensile strength, compared to untreated specimens of the same material quality. It is

assessed by comparing the relative decrease of maximum tensile strength of buried specimens, with

that of unburied control specimens.

A long-term rot retardant finish or an increased long-term resistance meets with the requirements for

cellulose containing textiles if the maximum tensile strength of a buried specimen, compared with an

unburied specimen, does not decrease by more than 25 %.

The soil burial intervals for long-term retardant finishes take twice the time needed for control

specimens to lose 80 % of their maximum tensile strength. The soil burial intervals for increased long-

term resistant finishes takes four times the time needed for the controls to lose 80 % of their maximum

tensile strength.
---------------------- Page: 6 ----------------------
SIST EN ISO 11721-2:2003
EN ISO 11721-2:2003 (E)
1 Scope

This European Standard describes a test procedure for identification of the long-term resist

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.