prEN 1646-2
(Main)Leisure accommodation vehicles - Motor Caravans - Part 2: User payload
Leisure accommodation vehicles - Motor Caravans - Part 2: User payload
This European standard specifies the method of calculation of minimum user payloads to be allowed for when designing motor caravans.
It also sets out the information relating to user payload to be included in the user's handbook.
It applies to motor caravans as defined in EN 13878.
Bewohnbare Freizeitfahrzeuge - Motorcaravans - Teil 2: Zuladung
Véhicules habitables de loisirs - Autocaravanes - Partie 2 : Charges utiles
Bivalna počitniška vozila - Počitniške prikolice - 2. del: Obremenitev
General Information
Standards Content (Sample)
SLOVENSKI OSIST prEN 1646-2:2004
PREDSTANDARD
december 2004
Bivalna počitniška vozila - Počitniške prikolice - 2. del: Obremenitev
Leisure accommodation vehicles - Motor Caravans - Part 2: User payload
ICS 43.100 Referenčna števi
...
This May Also Interest You
This document establishes the required or the achievable classes of part properties for additive manufactured polymer parts in order to get a common understanding on part quality. It is aimed at providers of manufacturing services for polymer parts who use additive manufacturing machines and at the customers for these services. Designers of parts as well as buyers and providers of manufacturing services can specify, in a traceable manner, the required or the achievable level of part properties with the aid of this document. The classification is based on mechanical, physical and geometrical properties. Further properties can be defined between buyer and provider of manufacturing.
This document is applicable to parts that have been manufactured from a thermoplastic polymer by means of thermal reaction fusion of material typically applied by a powder bed fusion (PBF) or material extrusion (MEX) processes. This document is also applicable to thermoplastic parts made by other processes, provided that due consideration is given to process-specific topics.
The classification of part properties applies to parts in as-built condition, that have been unpacked from the build space, with all support structures removed, but prior to any post-processing operations.
Specific industries (e.g. aerospace and medical) typically specify additional requirements.
- Draft22 pagesEnglish languagesale 10% offe-Library read for×1 day
- 15-Aug-2023
- 01-May-2022
- 25.030
- CEN/TC 438
- Draft4 pagesEnglish languagesale 10% offe-Library read for×1 day
This document specifies one of the methods for evaluating the habitat function of soils and determining effects of soil contaminants and substances on the reproduction of Folsomia candida Willem by dermal and alimentary uptake. This document also provides information on how to use this method for testing substances under temperate conditions.
The chronic test described is applicable to soils and soil materials of unknown quality, e.g. from contaminated sites, amended soils, soils after remediation, industrial, agricultural or other sites of concern and waste materials.
The method is not applicable to volatile substances, i.e. substances for which H (Henry's constant) or the air/water partition coefficient is greater than 1, or for which the vapour pressure exceeds 300 Pa at 25 °C.
- Draft41 pagesEnglish languagesale 10% offe-Library read for×1 day
- 15-Aug-2023
- 13.080.30
- CEN/TC 444
- Draft16 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft16 pagesEnglish languagesale 10% offe-Library read for×1 day
- 15-Aug-2023
- 35.240.70
- CEN/TC 287
This document specifies requirements for classification of covered electrodes, based on the all-weld metal chemical composition, the type of electrode covering and other electrode properties, and the all-weld metal mechanical properties, in the as-welded or heat-treated conditions, for manual metal arc welding of stainless and heat-resisting steels.
This document is a combined standard providing for classification utilizing a system based upon classification according to nominal composition or utilizing a system based upon classification according to alloy type.
a) Paragraphs and tables which carry the label “classification according to nominal composition-A” or “ISO 3581-A” are applicable only to products classified to that system.
b) Paragraphs and tables which carry the label “classification according to alloy type-B” or “ISO 3581-B” are applicable only to products classified to that system.
c) Paragraphs and tables which carry neither label are applicable to products classified according to either or both systems.
Annex B gives information on considerations on weld metal ferrite content.
- Draft37 pagesEnglish languagesale 10% offe-Library read for×1 day
- 15-Aug-2023
- 25.160.20
- CEN/TC 121
- Draft10 pagesEnglish languagesale 10% offe-Library read for×1 day
- 15-Aug-2023
- 07.100.30
- CEN/TC 463
- Draft10 pagesEnglish languagesale 10% offe-Library read for×1 day
In respect of pan-European eCall (operating requirements defined in EN 16072), this document defines the high-level application protocols, procedures and processes required to provide the eCall service using a TS12 emergency call over a circuit-switched mobile communications network.
NOTE 1 The objective of implementing the pan-European in-vehicle emergency call system (eCall) is to automate the notification of a traffic accident, wherever in Europe, with the same technical standards and the same quality of services objectives by using a PLMN (such as ETSI prime medium) which supports the European harmonized 112/E112 emergency number (TS12 ETSI TS 122 003) and to provide a means of manually triggering the notification of an emergency incident.
NOTE 2 HLAP requirements for third-party services supporting eCall can be found in EN 16102, and have been developed in conjunction with the development of this work item, and is consistent in respect of the interface to the PSAP. This deliverable makes reference to those provisions but does not duplicate them.
- Draft54 pagesEnglish languagesale 10% offe-Library read for×1 day
This document specifies the syntax and semantics of data objects in the field of electronic fee collection (EFC). The definitions of data types and assignment of semantics are provided in accordance with the abstract syntax notation one (ASN.1) technique, as specified in ISO/IEC 8824-1. This document defines:
— ASN.1 (data) types within the fields of EFC;
— ASN.1 (data) types of a more general use that are used more specifically in standards related to EFC.
This document does not seek to define ASN.1 (data) types that are primarily related to other fields that operate in conjunction with EFC, such as cooperative intelligent transport systems (C-ITS), the financial sector, etc.
- Draft55 pagesEnglish languagesale 10% offe-Library read for×1 day
- 08-Aug-2023
- 03.220.20
- 35.240.60
- CEN/TC 278
This document provides guidance to the characterization of waste. It applies to all types of waste, with unknown or partially known composition, by giving examples of EN standards dedicated to waste characterization and analytical methods for parameters not covered by standards. Some requirements concerning the determination of inorganic elements and organic substances content in waste are given to achieve approximately 90 % or the highest possible mass.
In case information on the origin or on the composition of the waste is given by the owner of the waste, it might be sufficient to follow only part of this document to complete missing knowledge about the waste.
- Draft35 pagesEnglish languagesale 10% offe-Library read for×1 day
- 08-Aug-2023
- 13.030.01
- CEN/TC 444
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.