CISPR 36:2020 defines limits for 3 m measurement distance and methods of measurement that are designed to provide protection for off-board receivers (at 10 m distance) in the frequency range of 150 kHz to 30 MHz when used in the residential environment.
NOTE Protection of receivers used on board the same vehicle as the disturbance source(s) is covered by CISPR 25.
This document applies to the emission of electromagnetic energy which might cause interference to radio reception and which is emitted from electric and hybrid electric vehicles propelled by an internal traction battery (see 3.2 and 3.3) when operated on the road. This document applies to vehicles that have a traction battery voltage between 100 V and 1 000 V.
Electric vehicles to which CISPR 14-1 applies are not in the scope of this document. This document applies only to road vehicles where an electric propulsion is used for sustained speed of more than 6 km/h. Vehicles where the electric motor is only used to start up the internal combustion engine (e.g. "micro hybrid") and vehicles where the electric motor is used for additional propulsion only during acceleration (e.g. "48 V mild hybrid vehicles") are not in the scope of this document. The radiated emission requirements in this document are not applicable to the intentional transmissions from a radio transmitter as defined by the ITU including their spurious emissions. Annex C lists work being considered for future revisions.

  • Standard
    48 pages
    English and French language
    sale 15% off
  • Standard
    104 pages
    English and French language
    sale 15% off

CISPR 25:2021 contains limits and procedures for the measurement of radio disturbances in the frequency range of 150 kHz to 5 925 MHz. This document applies to vehicles, boats, internal combustion engines, trailers, devices and any electronic/electrical component intended for use in vehicles, boats, trailers and devices. Refer to International Telecommunications Union (ITU) publications for details of frequency allocations. The limits are intended to provide protection for on-board receivers installed (per the manufacturer’s guidelines) in a vehicle from disturbances produced by components/modules in the same vehicle. The receiver types to be protected are, for example, broadcast receivers (sound and television), land mobile radio, radio telephone, amateur, citizens' radio, Satellite Navigation (GPS etc.), Wi-Fi, V2X, and Bluetooth. This document does not include protection of electronic control systems from radio frequency (RF) emissions or from transient or pulse-type voltage fluctuations. These subjects are included in ISO publications. The limits in this document are recommended and subject to modification as agreed between the customer (e.g. vehicle manufacturer) and the supplier (e.g. component manufacturer). This document is also intended to be applied by vehicle manufacturers and suppliers which are to be added and connected to the vehicle harness or to an on-board power connector after delivery of the vehicle. This document defines test methods for use by vehicle manufacturers and suppliers, to assist in the design of vehicles and components and ensure controlled levels of on-board radio frequency emissions. The emission requirements in this document are not intended to be applicable to the intentional transmissions from a radio transmitter as defined by the ITU including their spurious emissions.
NOTE 1 This exclusion is limited to those intended transmitter emissions, which leave the EUT as radiated emissions and are coupled onto the wire line in the measurement setup. For conducted transmissions on frequencies intentionally produced by the radio part of an EUT, this exclusion does not apply.
NOTE 2 It is usual for customers and suppliers to use radio regulation standards to manage the effect of spurious emissions from a radio transmitter unless limits of spurious emission are agreed in the test plan.
This fifth edition cancels and replaces the fourth edition published in 2016. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
inclusion of new frequency bands,
deletion of the annex on TEM cells,
inclusion of annexes on measurement uncertainty,
overall improvement.

  • Standard
    372 pages
    English and French language
    sale 15% off

CISPR 25:2016 contains limits and procedures for the measurement of radio disturbances in the frequency range of 150 kHz to 2 500 MHz. The standard applies to any electronic/electrical component intended for use in vehicles, trailers and devices. Refer to International Telecommunications Union (ITU) publications for details of frequency allocations. The limits are intended to provide protection for receivers installed in a vehicle from disturbances produced by components/modules in the same vehicle. The method and limits for a complete vehicle (whether connected to the power mains for charging purposes or not) are in Clause 5 and the methods and limits for components/modules are in Clause 6. Only a complete vehicle test can be used to determine the component compatibility with respect to a vehicle's limit. The receiver types to be protected are, for example, broadcast receivers (sound and television), land mobile radio, radio telephone, amateur, citizens' radio, Satellite Navigation (GPS etc.), Wi-Fi and Bluetooth. For the purpose of this standard, a vehicle is a machine, which is self-propelled by an internal combustion engine, electric means, or both. Vehicles include (but are not limited to) passenger cars, trucks, agricultural tractors and snowmobiles. Annex A provides guidance in determining whether this standard is applicable to particular equipment. This fourth edition cancels and replaces the third edition published in 2008. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- inclusion of charging mode for electric vehicles (EV) and plug-in electric vehicles (PHEV),
- the methods for chamber validation have been included,
- test methods for shielded power supply systems for high voltages for electric and hybrid electric vehicles have been included,
- overall improvement.
The contents of the corrigendum of October 2017 have been included in this copy.

  • Standard
    320 pages
    English and French language
    sale 15% off

CISPR 12:2007+A1:2009 The limits in this International Standard are designed to provide protection for broadcast receivers in the frequency range of 30 MHz to 1 000 MHz when used in the residential environment. Compliance with this standard may not provide adequate protection for new types of radio transmissions or receivers used in the residential environment nearer than 10 m to the vehicle, boat or device. This standard applies to the emission of electromagnetic energy which may cause interference to radio reception and which is emitted from
a) vehicles propelled by an internal combustion engine, electrical means or both;
b) boats propelled by an internal combustion engine, electrical means or both. Boats are to be tested in the same manner as vehicles except where they have unique characteristics as explicitly stated in this standard;
c) devices equipped with internal combustion engines.
The following changes were made with respect to the previous edition:
- deletion of narrowband / broadband determination;
- general improvement of wording.
This consolidated version consists of the sixth edition (2007) and its amendment 1 (2009). Therefore, no need to order amendment in addition to this publication.

  • Standard
    110 pages
    English and French language
    sale 15% off

CISPR 25:2008 contains limits and procedures for the measurement of radio disturbances in the frequency range of 150 kHz to 2 500 MHz. The standard applies to any electronic/electrical component intended for use in vehicles, trailers and devices. Refer to International Telecommunications Union (ITU) publications for details of frequency allocations. The limits are intended to provide protection for receivers installed in a vehicle from disturbances produced by components/modules in the same vehicle. The method and limits for a complete vehicle are in Clause 5 and the methods and limits for components/modules are in Clause 6. Only a complete vehicle test can be used to determine the component compatibility with respect to a vehicle's limit. The receiver types to be protected are, for example, broadcast receivers (sound and television), land mobile radio, radio telephone, amateur, citizens' radio, Satellite Navigation (GPS, etc.) and Bluetooth. For the purpose of this standard, a vehicle is a machine, which is self-propelled. Vehicles include (but are not limited to) passenger cars, trucks, agricultural tractors and snowmobiles. Annex A provides guidance in determining whether this standard is applicable to particular equipment. The limits in this standard are recommended and subject to modification as agreed between the vehicle manufacturer and the component supplier. This standard is also intended to be applied by manufacturers and suppliers of components and equipment which are to be added and connected to the vehicle harness or to an on-board power connector after delivery of the vehicle. This third edition cancels and replaces the second edition published in 2002. The following significant changes were made with respect to the previous edition:
- addition of required measurements with both an average detector and a peak or quasi-peak detector;
- addition of methods and limits for the protection of new analogue and digital radio services, which cover the frequency range up to 2 500 MHz;
- addition of a new measurement method for components (stripline) as an informative Annex G;
- addition of the contents of CISPR 21 as Annex H; CISPR 21 in its entirety now becomes obsolete;
- deletion of narrowband / broadband determination;
- deletion of the Annex on rod antenna characterisation (this is now covered by CISPR 16-1-4);
- deletion of the Annex on characterisation of shielded enclosure (CISPR 25 will be amended when the CISPR/D / CISPR/A Joint Task Force on chamber validation finishes its work). The contents of the corrigendum of January 2009 have been included in this copy.

  • Standard
    168 pages
    English and French language
    sale 15% off

The limits in this International Standard are designed to provide protection for broadcast receivers in the frequency range of 30 MHz to 1 000 MHz when used in the residential environment. Compliance with this standard may not provide adequate protection for new types of radio transmissions or receivers used in the residential environment nearer than 10 m to the vehicle, boat or device. This standard applies to the emission of electromagnetic energy which may cause interference to radio reception and which is emitted from a) vehicles propelled by an internal combustion engine, electrical means or both; b) boats propelled by an internal combustion engine, electrical means or both. Boats are to be tested in the same manner as vehicles except where they have unique characteristics as explicitly stated in this standard; c) devices equipped with internal combustion engines. This sixth edition cancels and replaces the fifth edition published in 2001 and its Amendment 1 (2005). This edition constitutes a technical revision. The following changes were made with respect to the previous edition: - deletion of narrowband / broadband determination; - general improvement of wording.

  • Standard
    109 pages
    English and French language
    sale 15% off
  • Standard
    110 pages
    English and French language
    sale 15% off

Applies to the emission of broadband and narrowband electromagnetic energy which may cause interference to radio reception and which is emitted from: a) vehicles propelled by an internal combustion engine, electrical means, or both; b) boats propelled by an internal combustion engine, electrical means, or both. c) devices equipped with internal combustion engines. This standard includes limits and test methods for both broadband and narrowband emissions. The limits are designed to provide protection for broadcast receivers in the frequency range of 30 MHz to 1000 MHz when used in a residential environment.

  • Standard
    103 pages
    English and French language
    sale 15% off
  • Standard
    105 pages
    English and French language
    sale 15% off

This standard is designed to protect receivers from disturbances produced by conducted and radiated emissions arising in a vehicle. Test procedures and limits given are intended to provide provisional control of vehicle-radiated emissions, as well as component/module conducted/radiated emissions of long and short duration. The standard: - establishes a test method for measuring the electromagnetic emissions from the electrical system of a vehicle; - sets limits for the electromagnetic emissions from the electrical system of a vehicle; - establishes test methods for testing on-board components and modules independent from the vehicle; - sets limits for electromagnetic emissions from components to prevent objectionable disturbance to on-board receivers; - classifies automotive components by disturbance duration to establish a range of limits. The contents of the corrigendum of March 2004 and the interpretation sheet of February 2007 have been included in this copy.

  • Standard
    62 pages
    English language
    sale 15% off
  • Standard
    62 pages
    French language
    sale 15% off
  • Standard
    123 pages
    English and French language
    sale 15% off

Applies to the emission of broadband and narrowband electromagnetic energy which may cause interference to radio reception and which is emitted from: a) vehicles propelled by an internal combustion engine, electrical means, or both; b) motor boats propelled by an internal combustion engine, electrical means, or both; c) devices equipped with spark-ignited internal combustion engines. This standard includes limits and test methods for both broadband and narrowband emissions. The limits are designed to provide protection for broadcast receivers in the frequency range of 30 MHz to 1000 MHz when used in a residential environment.

  • Standard
    99 pages
    English and French language
    sale 15% off

This standard is designed to protect receivers from disturbances produced by conducted and radiated emissions arising in a vehicle. Test procedures and limits given are intended to provide provisional control of vehicle-radiated emissions, as well as component/module conducted/radiated emissions of long and short duration. The standard: - establishes a test method for measuring the electromagnetic emissions from the electrical system of a vehicle; - sets limits for the electromagnetic emissions from the electrical system of a vehicle; - establishes a test method for testing on-board components and modules independent from the vehicle; - sets limits for electromagnetic emissions from components to prevent objectionable disturbance to on-board receivers; - classifies automotive components by disturbance duration to establish a range of limits.

  • Standard
    93 pages
    English and French language
    sale 15% off

The recommendations in this Technical Report are applicable to electrical and electronic equipment intended to be connected to a public low-voltage a.c. distribution system, where the equipment has a rated input current exceeding 16 A per phase, or has a lower rated current, but requires the special consent of the supply authority.[
]This publication has the status of a technical report - type 2

  • Technical report
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Applies to the radiation of electromagnetic energy which may cause interference to radio reception and which is emitted from: a) vehicles propelled by an internal combustion engine, electrical means, or both; b) motor boats propelled by an internal combustion engine, electrical means, or both; c) devices equipped with spark ignited internal combustion engines. Establishes uniform requirements for radio interference suppression of vehicles, motor boats and devices and fixes limits of interference. Describes methods of measurement and gives guidance for suppression methods.

  • Standard
    77 pages
    English and French language
    sale 15% off

Numerous test programmes have been conducted using voice transmissions in an attempt to develop a simple, objective measurement which would correlate well with the subjective effects of mobile radio degradation; the results have been partially successful. This CISPR Report summarizes the conclusions which have been reached, gives suggestions for mobile receiver design, and proposes the need for world-wide receiver noise immunity specifications.

  • Standard
    13 pages
    English and French language
    sale 15% off

Active antennas used on board vehicles are electronic components in the sense of CISPR 25. Therefore, the requirements regarding emissions apply to it in its function as EUT. In addition to this, vehicle active antennas are used as part of the measurement chain for the evaluation of emissions produced by any other component in the vehicle. With a passive antenna no special considerations were necessary because it can neither generate emissions nor harmonics due to its linearity. This Publicly Available Specification (PAS) gives additional information for the use of active antennas for radiated emission measurement according to CISPR 25. Test set-ups at component level are defined for the determination of noise floor.

  • Technical specification
    12 pages
    English language
    sale 15% off

Provides methods of judging the degradation of radio communication in the presence of impulsive noise produced by automotive ignition sources and recommends ways of improving radio performance.

  • Standard
    15 pages
    English and French language
    sale 15% off